Waters Programmable Heater-Shaker+ Device
Waters ·Made in USA · In Active Production

Waters Programmable Heater-Shaker+ Device

Waters Programmable Heater-Shaker+ Device — Laboratory automation & equipment.

The Waters Programmable Heater-Shaker+ Device is a connected laboratory shaker with a shaking speed range of 200–2,500 rpm and temperature control from ambient to 99°C in 1.0°C steps. It accepts ø36.5 mm bottles and achieves 0.1 mm zero-positioning accuracy, distinguishing it within the Heater-Shaker+ line by its programmable, network-ready design. It is intended for automated sample preparation and incubation workflows integrated via Wi-Fi or Ethernet with OneLab software and Andrew+, Pipette+, or manual systems.

Full specifications

Core Performance & Functional Specifications
Shaking speed mfr 200 to 2,500 rpm
Temperature range mfr ambient up to 99°C
Temperature steps mfr 1.0 °C
Zero-positioning accuracy mfr 0.1 mm
Bottle compatibility mfr ø36.5 mm bottles
Connectivity mfr Wi-Fi or Ethernet
Software Compatibility mfr OneLab
System Compatibility mfr Andrew+, Pipette+, Manual
UNSPSC mfr 41104018
Brand mfr Heater-Shaker+
Product Type mfr Connected Device
Mixing orbit constant mfr 2 mm
Speed setting resolution mfr 1 rpm
Mixing regulation accuracy mfr ±25 rpm
Ingress protection mfr IP20
Dimensions (W x L x H) mfr 170 x 162 x 100 mm (The specified dimensions are subject to change according to)
Dimensions, Weight & Mechanical Design
Weight 2.55 kg
Electrical, Power & Drive Specifications
Power consumption 120 W
Mixing frequency mfr 200 rpm up to 2500 rpm rpm (The maximum speed may differ according to the type of used l)
External power supply Input mfr 100-240 VAC
External power supply Input current mfr 1.4 A
External power supply Output voltage mfr 24 VDC
External power supply Output current mfr 5 A
Power or current rating mfr 5 A
Operating voltage mfr 24 VDC
Interfaces, Connections & Control
Overvoltage category DC port mfr Cat I
Operating Conditions, Environment & Protection
Relative humidity mfr 80 % (at 37°C)
Maximum operating altitude mfr 2000 m
Pollution degree of the intended environment mfr Pollution degree 2
Standards, Safety & General Data
Warranty mfr 1 year

Description

Construction and positioning

Integration & Operating Notes

Mounting
Ensure stable, level surface for accurate shaking

The device should be placed on a stable, level bench to prevent vibration and ensure proper operation, especially at higher speeds. Adequate clearance around the unit is necessary for ventilation and access.

Factory Specification Sheet
Electrical
Requires standard laboratory power supply

The Heater-Shaker+ operates on standard laboratory power; ensure the supply matches the device's voltage and current requirements. Use a grounded outlet to prevent electrical hazards.

Factory Specification Sheet
Control & I/O
Network configuration required for remote control

To enable remote programming and monitoring via OneLab, the device must be configured with a static IP or DHCP reservation and connected to the same network as the control software. Firewall settings may need adjustment to allow communication.

Factory Specification Sheet
Maintenance
Regular cleaning and calibration recommended

Clean the device regularly to prevent sample residue buildup. Periodically verify temperature and shaking speed accuracy using calibrated instruments. Refer to the manual for maintenance intervals.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the Programmable Heater-Shaker+ over other Heater-Shaker+ variants?

Choose this model when you need programmable control, network connectivity (Wi-Fi/Ethernet), and integration with OneLab software for automated workflows. For simpler, manual-only shaking, consider non-programmable variants.

What are the requirements for integrating this device with a liquid handling robot?

The device must be connected via Wi-Fi or Ethernet to the same network as the robot controller. Ensure compatibility with Andrew+ or Pipette+ systems and configure OneLab software to coordinate actions. A stable network and proper IP addressing are essential.

What maintenance and accessories are needed for the Heater-Shaker+?

Regular cleaning and periodic calibration are recommended. Accessories such as bottle clamps for ø36.5 mm bottles and network cables are not included and must be ordered separately. Refer to the manual for detailed maintenance schedules.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Plate Heater-Shaker+ User Manual
Manual ·493,7 КБ ·8 pp.
View PDF