Waters Waters Fraction Collector IV
Waters ·Made in USA · In Active Production

Waters Waters Fraction Collector IV

Waters Waters Fraction Collector IV — Laboratory automation & equipment.

The Waters Fraction Collector IV is a benchtop fraction collector with a 0.5–300 mL/min flow range and a 300 mm width, designed for laboratory automation. It accommodates up to 162 test tubes (12–18 mm O.D.), 162 scintillation vials (17 mm O.D.), 60 scintillation vials (30 mm O.D.), or six 96-well microtiter plates, with a 0.2 s nozzle travel time between adjacent tubes. Ethernet communication and a 100–240 V AC input enable integration into automated purification and analysis workflows.

Full specifications

Core Performance & Functional Specifications
Flow rate range mfr 0.5 mL/min to 300 mL/min
Scintillation vial (17 mm O.D.) mfr Max. 162
Scintillation vial (30 mm O.D.) mfr Max. 60
Microtiter plate mfr 6×96 well plate
Preparative funnel mfr 6×32-position rack
Microcentrifuge tube rack mfr Up to three racks, 162 positions
Waters 3767 rack mfr Max. 1
Nozzle travel time mfr 0.2 s (adjacent test tube movement time)
Electrical characteristics mfr AC 100 V – 240 V, 50 Hz/60 Hz
Communication mfr Ethernet communication
External dimensions mfr Width: 300 mm, Depth: 600 mm, Height: 544 mm
Temp. range mfr 4 to 40°C (39 to 104°F)
Dimensions, Weight & Mechanical Design
Weight 14.1 kg
Standards, Safety & General Data
Standard test tube rack mfr 12.0-18.0 mm O.D. rack, max. 162

Description

Construction and positioning

Integration & Operating Notes

Electrical
Worldwide AC input voltage range

The unit accepts 100–240 V AC at 50 or 60 Hz, allowing direct connection to standard laboratory mains without a step-down transformer. Ensure the supply circuit can handle the instrument's current draw (not specified) and is properly grounded.

Factory Specification Sheet
Process Limits
Flow rate must stay within 0.5–300 mL/min

Operating below 0.5 mL/min or above 300 mL/min may result in inaccurate fraction collection or instrument malfunction. Verify that the pump or upstream flow is calibrated to remain within this range during collection.

Factory Specification Sheet

Selection & Integration Q&A

What are the requirements for connecting the Fraction Collector IV to a pump and control system?

The collector requires a pump capable of delivering 0.5–300 mL/min and an Ethernet connection for control. Ensure the pump output is compatible with the collection vessel format and that the control software supports Ethernet communication.

Dimensional Drawings & Technical Documentation

Technical documentation