No photo available yet

Eppendorf ·Made in Germany · In Active Production

Eppendorf Bioprocess Autosampler

Eppendorf Bioprocess Autosampler — Bioreactors & fermenters.

The Eppendorf Bioprocess Autosampler is an automated sampling accessory for bioreactors and fermenters, available in single-head and dual-head configurations. It withdraws and delivers process samples without manual intervention, supporting hands-free monitoring of fermentation runs. The exact sample volume, cycle timing, and wetted-material specifications are not stated in the supplied verified facts.

Full specifications

Description

Construction and positioning

Behavior and process role

Installation and control

Integration & Operating Notes

Process Limits
Sampling parameters are not established by the supplied facts

No verified sample volume, cycle time, line length, or sterilization data were provided. Before specifying this unit, obtain the current Eppendorf datasheet and confirm that its sampling range and wetted materials match the vessel, the process temperature, and the downstream analyzer.

Fermentors Bioreactors Brochure Bioprocess Autosampler Hands Free Samp
Control & I/O
Controller and signal interface must be confirmed with Eppendorf

The document digest contains no interface section, so the available trigger signals, communication protocol, and handshake with the bioreactor control system are unknown. Confirm these before committing to an automated sampling schedule or integrating with a SCADA/DCS layer.

Fermentors Bioreactors Brochure Bioprocess Autosampler Hands Free Samp

Selection & Integration Q&A

When should I choose the single-head versus the dual-head Bioprocess Autosampler?

The verified facts list only that both single-head and dual-head variants exist. No throughput, timing, or sample-count data are supplied, so the choice cannot be made from these facts alone; request the Eppendorf configuration guide to compare sampling capacity and simultaneous sampling needs.

What must be verified before connecting the autosampler to my bioreactor control system?

The supplied digest contains no interface or signal details. Confirm with Eppendorf the trigger/communication protocol, required handshake signals, and whether the unit operates standalone or under bioreactor controller command before designing the automation sequence.

What mounting and environmental limits apply to the autosampler?

No mounting, ambient-temperature, humidity, or IP-rating data are present in the verified facts. These must be obtained from the installation manual before siting the unit near the vessel, particularly in washdown or classified areas.

What maintenance and consumables should be planned for, and what is not included in base delivery?

The supplied facts contain no maintenance schedule or accessory list. Request the recommended tubing/consumable replacement interval and confirm whether sample lines, fittings, and control cables are included or must be ordered separately.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Fermentors Bioreactors Brochure Bioprocess Autosampler Hands Free Samp
Brochure ·4,7 МБ ·9 pp.
View PDF