Nabertherm GR 1300/13
Nabertherm GR 1300/13 — Special application furnaces.
The GR 1300/13 is a 3-phase gradient furnace with a 1300 × 100 × 60 mm chamber and 1300 °C maximum temperature, built for strand annealing and gradient testing. Its 18 kW connected load and 400 kg mass distinguish it as a fixed-installation unit. It serves processes requiring a controlled temperature profile along the 1300 mm working length.
Full specifications
| Electrical connection | 3-phase |
| Connected mfr | 18 |
| Inner dimensions (W × D × H) mfr | 1300 × 100 × 60 mm |
| Outer dimensions (W × D × H) mfr | 1790 × 1020 × 1350 mm |
| Weight | 400 kg |
| Max temperature | 1300 °C |
Description
Construction and positioning
- The GR 1300/13 is a gradient furnace from Nabertherm's lab strand annealing series, with a maximum temperature of 1300 °C.
- The chamber measures 1300 mm wide × 100 mm deep × 60 mm high, giving an elongated, shallow working volume suited to strand or wire passage.
- Outer dimensions are 1790 × 1020 × 1350 mm (W × D × H); unit weight is 400 kg.
- Electrical connection is 3-phase with an 18 kW connected load.
- No sibling models are listed in the verified facts, so relative positioning within the series cannot be stated beyond this model's own configuration.
Behavior under load and media
- No digitized curve points or temperature-uniformity data are available for this model; gradient behavior along the 1300 mm length is not quantified in the supplied facts.
- The 1300 °C maximum applies to the furnace chamber; no heating-rate or cooling-rate values are provided.
Installation, control and operation
- The attached document digests cover controller series 500 and the MyNabertherm app, process data storage, and AMS2750F instrumentation types, but they do not print furnace-model-specific settings for the GR 1300/13.
- Other digests (fiber optics, foundry, dental) describe different product lines and contain no actionable facts for this model.
- Consequently, no model-specific wiring, sensor type, or control-loop details can be asserted from the supplied material.
Integration & Operating Notes
The furnace draws 18 kW on a 3-phase connection. Verify site distribution, breaker rating, and cable cross-section against the full 18 kW before installation; undersized supply will trip or limit heat-up. No voltage or current values are given in the verified facts, so confirm them from the nameplate.
The controller digest covers series 500 and MyNabertherm app functions, process data storage, and AMS2750F instrumentation types, but prints no GR 1300/13-specific configuration. Specify the controller variant and any recorder separately; do not assume a default controller from the furnace data sheet.
The working chamber is 1300 mm long but only 100 mm deep and 60 mm high. Charges, fixtures, or strand guides must fit within this shallow envelope; taller tooling will not enter, and the gradient along the 1300 mm length is not quantified in the supplied facts.
Selection & Integration Q&A
Choose the GR 1300/13 when the process needs a 1300 mm long, 60 mm high chamber at up to 1300 °C and a fixed 3-phase 18 kW installation. No sibling models are listed in the verified facts, so comparison with other series members cannot be made from this data.
A 3-phase supply sized for the 18 kW connected load is required. Controller and instrumentation are not specified in the furnace facts; the controller digest covers series 500 and MyNabertherm app options but prints no model-specific settings, so the control package must be specified separately.
The verified facts and document digests contain no maintenance intervals, error codes, or accessory lists for this model. Controller options and process data storage are described generically in the controller digest, but no consumables, cables, or service schedule are specified for the GR 1300/13.