Nabertherm KB 400/12
Nabertherm KB 400/12 — Tilting Furnaces Electrically Heated Or Gas Fired.
The KB 400/12 is a gas-fired tilting furnace from Nabertherm's KB series, equipped with a TBN 1100 crucible and rated for a maximum temperature of 1200 °C. With a capacity of 1000 kg and a burner output of 450 kW, it is the largest model in the KB/12 line, positioned above the KB 150/12 and KB 360/12 for high-volume melting and holding duties. Its tilting design supports controlled pouring in foundry and metal-processing systems.
Nabertherm KB Series — Model Comparison & Selection
| Model | Weight, kg | Max temperature, °C |
|---|---|---|
| KB 400/12 Current | 3600 | 1200 |
| KB 360/12 | 3300 | 1200 |
Full specifications
| Crucible mfr | TBN 1100 |
| Capacityin kg mfr | 1000 |
| Burneroutput mfr | 450 |
| Melting performance3,6in kg mfr | 4501 |
| Consumptionmelting6kWh mfr | 1.0 - 1.31 |
| ConsumptionholdingLid closed mfr | 19 |
| Outer dimensions (W × D × H) mfr | 1890 × 2150 mm |
| Weight | 3600 kg |
| Max temperature | 1200 °C |
Description
Construction and series positioning
- The KB 400/12 is a gas-fired tilting furnace, the largest of the KB/12 variants (siblings: KB 150/12, KB 360/12). It uses crucible type TBN 1100 and holds up to 1000 kg of melt.
- Outer dimensions are 1890 mm wide × 2150 mm deep; the unit weighs 3600 kg. Maximum temperature is 1200 °C.
- Unlike electrically heated tilting furnaces (K series), the KB line is gas-fired, with a burner output of 450 kW for this model.
Performance and operation
- Melting performance is listed as 4501 kg (likely 450 kg/h, but the unit is ambiguous in the source; treat as a relative indicator only). Energy consumption during melting is 1.0–1.3 kWh per unit (likely per kg), and holding consumption with lid closed is 19 (unit not stated).
- No digitized curve points are available; behavior under load must be derived from the above figures and the general foundry catalog.
- The tilting mechanism allows controlled pouring; the crucible is a consumable that must be compatible with the melt and the furnace's thermal profile.
Control and integration
- The attached controller digest covers Nabertherm's 500 series and MyNabertherm app, but no model-specific controller is specified for the KB 400/12. Temperature uniformity and AMS2750F instrumentation types are discussed in general terms.
- Installation, connection, and gas-train details are not provided in the available digests; refer to the foundry catalog and the furnace manual for piping, flue, and safety requirements.
- The furnace is intended for melting and holding, typically in foundry environments where gas supply, exhaust, and crucible handling infrastructure are present.
Integration & Operating Notes
The maximum temperature of 1200 °C is a hard limit for the furnace and crucible. Exceeding it risks crucible failure, melt contamination, and damage to the refractory. The control system must be configured with an over-temperature cutout set below this value, and the thermocouple type must be suitable for the range.
The TBN 1100 crucible is specified for this model; using a different crucible may affect capacity, melting performance, and safety. The crucible material must be compatible with the alloy being melted to avoid chemical attack and premature failure. Consult the crucible supplier for melt-specific recommendations.
The gas-fired burner is rated at 450 kW. The gas supply train must be sized for this input, with appropriate pressure regulation, shut-off valves, and leak testing. Electrical supply is only for controls and ignition; no main power rating is given in the available facts.
The controller digest describes Nabertherm's 500 series and MyNabertherm app for process data storage and temperature uniformity. The KB 400/12 does not ship with a specific controller as standard; the choice affects data logging, AMS2750F compliance, and remote access. Specify the controller at order.
The crucible and refractory lining are consumables subject to thermal cycling and chemical attack. Inspect for cracks, glazing, and thickness loss at scheduled intervals based on duty cycle. Replace the crucible per supplier recommendations; keep spare thermocouples and gaskets on hand.
Selection & Integration Q&A
Choose the KB 400/12 for the highest capacity in the KB/12 line: 1000 kg melt and 450 kW burner output. The KB 360/12 offers lower capacity, and the KB 150/12 is for smaller batches. Select based on required melt volume per shift and available gas supply; the 400/12 demands the largest footprint (1890 × 2150 mm) and 3600 kg foundation load.
The burner requires a gas train sized for 450 kW input, with pressure regulation, safety shut-off valves, and leak detection per local codes. Exhaust hood and flue must handle combustion products; the furnace should be installed under a vent hood. Electrical supply is only for controls and ignition, typically 230 V or 400 V three-phase, but verify with Nabertherm.
The crucible TBN 1100 is listed as a specification, but consumables such as crucible, thermocouples, and refractory patching material are typically not included or are limited to initial fill. Controller, recorder, and MyNabertherm app are options. Gas train components and exhaust hood are site-supplied. Confirm the scope of supply with the order.