Nabertherm LE 14/11
Nabertherm LE 14/11 — Muffle furnaces.
The LE 14/11 is a 14-litre chamber muffle furnace from Nabertherm's Economy LE series, rated to 1100 °C with a 3.2 kW single-phase connection. Its 220 × 320 × 220 mm chamber and 30-minute heat-up distinguish it from smaller LE 1/11 and LE 6/11 siblings. It serves laboratory ashing, sintering and heat-treatment tasks requiring moderate batch volume.
Full specifications
| Chamber volume | 14 l |
| Electrical connection | 1-phase |
| Nominal power | 3.2 kW |
| Temperature uniformity | 170 °C |
| Heating time mfr | 30 min |
| Inner dimensions (W × D × H) mfr | 220 × 320 × 220 mm |
| Outer dimensions (W × D × H) mfr | 440 × 485 × 520 mm |
| Weight | 35 kg |
| Max temperature | 1100 °C |
Description
Construction and series positioning
- The LE 14/11 is the largest of the three listed LE ../11 variants (LE 1/11, LE 6/11, LE 14/11), offering a 14-litre chamber versus the smaller capacities of its siblings.
- Chamber dimensions are 220 mm wide × 320 mm deep × 220 mm high; external envelope is 440 × 485 × 520 mm and unit weight is 35 kg.
- Heating is via a single-phase 3.2 kW element set; no multi-zone or three-phase configuration is specified for this model.
Thermal behaviour
- Maximum operating temperature is 1100 °C. A 30-minute heating time is stated, but the measurement condition (empty chamber, setpoint, or load) is not given in the verified facts.
- Temperature uniformity is listed as 170 °C; the associated measurement condition is not provided, so this figure should be treated as a reference value rather than a guaranteed uniformity under load.
- No digitized curve points are available for this model, so no load-dependent heating or cooling profile can be asserted.
Control and operation
- The attached controller documentation covers the Nabertherm 500-series controllers and MyNabertherm app, including process-data storage and AMS2750F instrumentation types, but does not print model-specific wiring or setpoint tables for the LE 14/11.
- No installation, connection or operating specifics for this exact model appear in the supplied document digests; the furnace is described only by the factory specification data above.
Integration & Operating Notes
The furnace draws 3.2 kW on a single-phase connection. The engineer must verify that the branch circuit, protective device and supply conductor are sized for the full resistive load plus any controller and auxiliary consumption, and that the installation complies with local single-phase load limits.
Workpieces and crucibles must fit within the 220 × 320 × 220 mm chamber and must not exceed the 1100 °C maximum temperature. Loading above the chamber height or against the heating elements risks local overheating and invalidates the stated uniformity reference.
The supplied controller digest covers 500-series functions, process-data storage and AMS2750F instrumentation types, but does not state which controller is fitted to the LE 14/11 as standard. The purchaser must confirm the controller variant and any recorder or app integration at order stage.
Selection & Integration Q&A
Pick the LE 14/11 when the 14-litre chamber (220 × 320 × 220 mm) is needed for larger batches or bulky crucibles. The LE 1/11 and LE 6/11 offer smaller chambers; choose them only if the workload fits and lower thermal mass is preferred. All three share the 1100 °C class.
The furnace is a single-phase unit rated 3.2 kW at the stated connection. Size the branch circuit and protective device for the full resistive load plus controller draw, and confirm the site voltage matches the ordered configuration before installation.
The verified facts list no maintenance interval, no spare parts and no accessories in the base scope. Controller options, recorders and app integration are documented separately and must be specified at order. Consumables such as crucibles and thermocouples are not stated as included.