Nabertherm LH 30/12
Nabertherm ·Made in Germany · In Active Production

Nabertherm LH 30/12

Nabertherm LH 30/12 — High-temperature furnaces.

The LH 30/12 is a 30-litre chamber furnace with brick insulation, rated to 1200 °C and connected via a 3-phase supply. Its 320 × 320 × 320 mm chamber and 200 kg brick-lined body distinguish it from fiber-insulated siblings such as the LH 30/14. It serves laboratory heat treatment, sintering and annealing where stable, uniform chamber temperature matters more than fast cycling.

Full specifications

Core Performance & Functional Specifications
Chamber volume 30 l
Chamber volume 30 l
Chamber volume 30 l
Chamber volume 30 l
Chamber volume 30 l
Electrical connection 3-phase2
Electrical connection 3-phase2
Electrical connection 3-phase2
Electrical connection 3-phase2
Electrical connection 3-phase2
Connected mfr 7
Inner dimensions (W × D × H) mfr 320 × 320 × 320 mm
Outer dimensions (W × D × H) mfr 710 × 930 × 1290 mm
Dimensions, Weight & Mechanical Design
Weight 200 kg
Weight 200 kg
Weight 200 kg
Weight 200 kg
Weight 200 kg
Operating Conditions, Environment & Protection
Max temperature 1200 °C
Max temperature 1200 °C
Max temperature 1200 °C
Max temperature 1200 °C
Max temperature 1200 °C

Description

Construction and series positioning

Thermal behaviour

Electrical and control

Integration & Operating Notes

Electrical
Confirm 3-phase supply and protection before installation

The furnace is specified for a 3-phase connection, but the supplied data give no current or power figure (the 'Connected: 7' entry has no unit). The site electrician must obtain the nameplate rating and size the feeder, breaker and earth leakage protection accordingly before commissioning.

Factory Specification Sheet
Mounting
Floor loading and clearance for a 200 kg brick-lined body

At 200 kg and 1290 mm tall, the unit needs a level floor rated for the point load and sufficient free space above and around the casing for heat dissipation and door swing. No specific clearance values are given in the supplied documents, so the installation manual must be consulted.

Factory Specification Sheet
Process Limits
Do not exceed 1200 °C chamber temperature

The maximum temperature is 1200 °C. Operating above it risks damage to the brick lining and heating elements. No overshoot allowance or uniformity tolerance is documented for this model, so the controller setpoint and safety limit should be configured below this ceiling.

Factory Specification Sheet
Control & I/O
Controller and recorder options are not model-specific

The supplied process-control document covers the Nabertherm 500-series controllers and MyNabertherm app generically, without LH 30/12-specific parameters. Selection of controller, thermocouple type and any AMS2750F instrumentation class must be confirmed against the order configuration.

Prozesssteuerung englisch

Selection & Integration Q&A

When should I choose the LH 30/12 rather than the LH 30/14 or the larger LH 120/12?

Pick the LH 30/12 for 30-litre loads up to 1200 °C where brick insulation's thermal stability suits slow, uniform cycles. The LH 30/14 offers the same volume at higher temperature; the LH 120/12 and LH 216/12 are for larger batches.

What supply and protection does the 3-phase connection require?

The unit is a 3-phase load, but the supplied data give no current or power rating (the 'Connected: 7' value has no unit). Take the nameplate figure and size feeder, breaker and earth leakage protection from it before commissioning.

What floor and clearance conditions does the 200 kg brick-lined furnace need?

Plan for a level floor rated for the 200 kg point load and 1290 mm height, with free space for casing heat dissipation and door swing. The supplied documents give no numeric clearance values, so follow the installation manual.

What is included in base delivery versus optional controller and recorder accessories?

The supplied documents do not define a base-delivery bill of materials. Controller, thermocouple and recorder options are described only generically in the process-control document, so confirm the ordered configuration and any extra cables or consumables with the supplier.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF