Shimadzu Fully Automatic Rubber Tensile Testing System
Shimadzu Fully Automatic Rubber Tensile Testing System — Testing machines with Max test force 1 kilonewton.
The Shimadzu Fully Automatic Rubber Tensile Testing System is an integrated testing machine for automated tensile testing of rubber specimens. It combines a tensile frame, automatic specimen handling, and software control to perform repetitive tests without operator intervention. This system is intended for quality control and material evaluation in rubber manufacturing and research.
Full specifications
| Max test force | 1 kN |
| Grip, bending jig mfr | 1 kN |
| Specimen size measuring device mfr | Linear gauge type |
| Specimen storage unit mfr | Pallet type |
| Data processing unit mfr | 6250 |
| Gauge length extensometer mfr | 20 |
Description
Construction and Positioning
- The system is a fully automatic tensile testing machine specifically configured for rubber specimens.
- It integrates a tensile testing frame with automated specimen feeding, testing, and data acquisition.
- As a dedicated rubber testing system, it differs from general-purpose universal testing machines by automating the entire test cycle for rubber materials.
Behavior and Operation
- The system automatically handles specimens through the test sequence, reducing operator variability.
- It is designed for repetitive tensile testing of rubber, providing consistent results.
- The exact performance characteristics depend on the specific configuration and are detailed in the product documentation.
Installation and Control
- The system requires a suitable laboratory environment with stable power supply.
- Control is via dedicated software that manages test parameters and data output.
- Installation and operation specifics are provided in the instruction manual.
Integration & Operating Notes
The system should be installed on a rigid, level surface to ensure accurate test results and proper operation of automatic mechanisms. Vibration isolation may be necessary depending on the environment.
The system requires a specific electrical supply as stated on the nameplate. Connecting to an incorrect voltage can damage electrical components. Ensure proper grounding and circuit protection.
The automatic specimen handling and testing cycle must be interlocked with safety guards to prevent injury. The system should not operate if safety doors are open or guards are removed.
The automatic handling system is designed for specific specimen sizes and shapes. Using non-standard specimens may cause jams or inaccurate results. Refer to the manual for acceptable specimen dimensions.
The system requires periodic cleaning of specimen handling mechanisms and calibration of the load cell to maintain accuracy. Follow the maintenance schedule in the manual.
Selection & Integration Q&A
Choose this system for high-volume, repetitive rubber tensile tests where operator consistency and throughput are critical. For low-volume or varied material testing, a manual universal testing machine offers greater flexibility.
The system typically provides data export via standard file formats or direct database connection. Check the software specifications for compatibility with your LIMS and required interface protocols.