Agilent Bond Elut PPL User Guide
Technical Reference Summary
Covered Models & Document Scope
Sorbente de extracción en fase sólida Agilent Bond Elut PPL (polímero de estireno divinilbenceno modificado patentado, tamaño de partícula de 125 µm). El documento abarca cartuchos (200 mg/3 mL, 500 mg/6 mL) y tubos VersaPlate (100 mg) para el desarrollo de métodos de SPE polares y multipropósito.
Technical Data
| Parameter | Value | Condición |
|---|---|---|
| Sorbent type | proprietary modified styrene divinylbenzene polymer p.1 ↗ | |
| Particle size | 125 µm p.1 ↗ | |
| pH stability | stable at pH extremes p.1 ↗ | |
| Solvent compatibility | wide range of solvents p.1 ↗ | |
| Cartridge sorbent mass | 200 mg p.6 ↗ | 12105005, 3 mL |
| Cartridge volume | 3 mL p.6 ↗ | 12105005, 200 mg |
| VersaPlate tube sorbent mass | 100 mg p.6 ↗ | 7531901C, 7551901C |
| Conditioning solvent | methanol p.2 ↗ | typical protocol step 2 |
| Equilibration solvent | water p.2 ↗ | typical protocol step 3 |
| Wash solvent | 100% water or buffer p.2 ↗ | typical protocol step 5 |
| Elution solvent | methanol p.2 ↗ | typical protocol step 7 |
| Acidic elution | MeOH with 0.5% FA p.2 ↗ | parallel elution A |
| Basic elution | MeOH with 0.5% NH4OH p.2 ↗ | parallel elution B |
| Drying time | 30 seconds p.2 ↗ | after wash and after elution |
| Recommended pH adjustment | two units below pKa (neutral/acidic targets) or two units above pKa (basic targets) p.2 ↗ | method development |
Operating Limits
- pH stability: stable at pH extremes p.1 ↗
- particle size: 125 µm p.1 ↗
Ordering Data
| Ordering Code | Part No. | Variant / Code | Aplica a | Note |
|---|---|---|---|---|
| Bond Elut PPL cartridge, 200 mg, 3 mL p.6 ↗ | 12105005 | |||
| Bond Elut PPL cartridge, 500 mg, 6 mL p.6 ↗ | 12255001 | |||
| Bond Elut PPL VersaPlate tubes, 100 mg p.6 ↗ | 7531901C | Tubes need to be inserted into a VersaPlate base | ||
| Bond Elut PPL VersaPlate tubes, 100 mg p.6 ↗ | 7551901C | Tubes need to be inserted into a VersaPlate base |