Company mission and freedom of choice introduction
Overviewp. 4
Introduction to TPS vacuum system concept
Config.p. 5
Compact vacuum pump system variants and features
Config.p. 6
Mobile vacuum pump system variants and features
Config.p. 7
Flexible vacuum pump system variants and features
Orderingp. 8
Configuring TPS systems online
p. 6table, 12 rows
p. 4table, 6 rows
p. 5table, 11 rows
p. 7table, 3 rows
TPS-mobile
Features
Benefits
Roll-around cart with open structure
Easy mobility and serviceability
High capacity systems
Wide pumping speed range
Very fast pump-down
Wide choice of possible configurations, with TwisTorr 74 FS, 305 FS (high compression version) and 305 FSQ (high throughput version), and Turbo-V 551 turbo pumps, backed by Agilent dry scroll pumps (IDP or TriScroll series) or DS rotary vane pumps
Best vacuum performance and base pressure for light gases.
The system can be tailored to satisfy any application
Large selection of gauges and accessories
Gauge reading capability for any pressure range.
Easy customization
RS-232 or analog communication, pressure driven setpoint, analog setpoint
Easy to use: easy PLC and PC interfacing
through A-PLUS software
Onboard fore-vacuum safety valve
Full system protection against backstreaming in case of power failure.
Voltage 110/230V. All systems are CE certified.
Worldwide power configurations, complies with worldwide safety standards
Custimization Service available
Maximum flexibility to build custom configuration optimized for your need
TPS-mini
Features
Benefits
Smallest footprint, lightest weight, compact, dry, clean, and robust system
Direct mounting on customer’s system (no vacuum pipes needed / improved conductance / plug & pump operation)
Active gauge reading capability
Can drive a wide range vacuum gauge, no need for external gauge controller
Integrated large pressure data display
Easy system pressure monitoring
New generation turbomolecular pump TwisTorr 74 FS, backed by a dry 10 L/min diaphragm pump, inside the same case
Integrated plug and pump dry vacuum system. Cost-effective pumping solution for small volumes
Universal voltage (90 V-240 V) - CE/CSA certified
Worldwide power configurations, complies with worldwide safety standards
RS-232 or analogical communication, pressure driven setpoint, analog setpoint
Easy to use, easy PLC and PC interfacing
Features / Benefits
Features
Benefits
Integrated IDP-3 dry scroll backing pump
Very fast pumpdown time.
Easy scroll tip seal replacement (15 min)
Adaptive scroll pump driving system
Extended scroll pump tip seal life
Gas Ballast
Reduced humidity, for system performance optimization
Active gauge reading capability
Can drive a wide range vacuum gauge, no need for external gauge controller
Integrated large pressure data display
Easy system pressure monitoring
New generation TwisTorr 74 FS or 305 FS turbomolecular pumps
Excellent base pressure, down to 10-10 mbar
Compact, light, dry, clean, and robust bench top system
Plug and pump system, all-in-one, very simple use. Portable, fully integrated, hydrocarbon-free
Nominal voltage (90–240 V) - CE/CSA certified
Worldwide power configurations, complies with worldwide safety standards
RS-232 or analog communication, pressure driven setpoint, analog setpoint
Easy to use: easy PLC and PC interfacing through A-PLUS software.
Wheels option available
Easy maneuverability in small space
TPS-flexy
TURBO PUMP (TMP)
CONTROLLER
FOREPUMP
TwisTorr 74FS
Onboard controller
MD1 Diaphragm Pump
TwisTorr 305FS
Remote controller
IDP3 Scroll Pump
IDP7 Scroll Pump
Engineering Facts
14 facts · every claim linked to a page
Selection
TPS-mini is intended for small-volume chamber pump-down below 10 liters, so it should not be selected for larger chambers.
Prevents oversizing or undersizing the turbo pumping system for the chamber volume.
Source
“Small volume chamber pump-down (<10 L)”
Installation
TPS-mini can be mounted directly on the customer's system without vacuum pipes, improving conductance and simplifying installation.
Reduces installation effort and avoids conductance losses from unnecessary piping.
Source
“Direct mounting on customer’s system (no vacuum pipes needed / improved conductance / plug & pump operation)”
Cumplimiento
TPS-mini accepts universal voltage from 90 V to 240 V and is CE/CSA certified for worldwide power configurations.
Confirms suitability for different mains supplies and safety certification before installation.
Source
“Universal voltage (90 V-240 V) - CE/CSA certified”
Performance
TPS-compact with the TwisTorr 74 FS or 305 FS can reach base pressure down to 10-10 mbar.
Sets the expected vacuum performance limit when selecting the system for high-vacuum applications.
Source
“Excellent base pressure, down to 10-10 mbar”
Maintenance
The TPS-compact scroll tip seal can be replaced easily in about 15 minutes.
Short maintenance time reduces downtime and should be considered in service planning.
Source
“Easy scroll tip seal replacement (15 min)”
Operation
The adaptive scroll pump driving firmware monitors turbo pump absorbed power and controls the backing pump according to gas load, reducing scroll pump operation time by up to 80%.
Extends tip seal life and reduces wear by avoiding unnecessary backing pump operation.
Source
“This algorithm reduces the overall scroll pump operation time up to 80%”
Safety
An onboard fore-vacuum safety valve prevents backstreaming if power fails.
Protects the vacuum system and process from contamination during a power interruption.
Source
“Onboard fore-vacuum safety valve prevents backstreaming in case of power failure”
Selection
TPS-mobile is available with turbo pumps from 70 to 550 L/sec and a choice of dry scroll or oil-sealed primary pumps.
Allows matching pumping speed and backing pump type to the required vacuum performance and cleanliness.
Source
“Available with a choice of turbo pumps from 70 to 550 L/sec, with a choice of dry scroll pump or oil sealed primary pumps”
Selection
TPS-mobile can be configured with TwisTorr 74 FS, 305 FS high-compression, 305 FSQ high-throughput, and Turbo-V 551 turbo pumps.
Helps choose the correct turbo pump variant for light-gas compression or high-throughput duty.
Source
“TwisTorr 74 FS, 305 FS (high compression version) and 305 FSQ (high throughput version), and Turbo-V 551 turbo pumps”
Installation
TPS-flexy is assembled by the user from standard catalog components using assembly instructions and a video tutorial.
Clarifies that installation labor and assembly are the user's responsibility for the DIY solution.
Source
“assemble the system yourself, using our easy to follow assembly instructions and video tutorial”
Maintenance
TPS-flexy uses modular assembly so any component can be replaced separately, simplifying field service.
Reduces service cost and downtime because individual modules can be swapped instead of replacing the whole system.
Source
“Modular assembling (any component can be replaced separately).”
Installation
The TPS-flexy turbo pump can be easily detached and mounted directly to the chamber.
Supports direct chamber mounting and simplifies mechanical integration.
Source
“Turbo pump is easily detached to mount directly to your chamber”
Operation
TPS systems provide RS-232 or analog communication with pressure-driven and analog setpoints for PLC and PC interfacing.
Ensures compatibility with external control and monitoring systems during integration.
Source
“RS-232 or analog communication, pressure driven setpoint, analog setpoint”
Cumplimiento
TPS-mobile systems are available at 110/230 V and all systems are CE certified.
Confirms electrical configuration and CE compliance before ordering and installation.