HiLobe 11003 — product leaflet
Technical Reference Summary
Covered Models & Document Scope
Pfeiffer Vacuum HiLobe 8103, 11003 y 14003, amplificadores de vacío (variantes de tres velocidades de la misma estructura). Hoja de datos fechada el 01.07.2025 que cubre especificaciones técnicas, opciones, accesorios y piezas de repuesto para los tres modelos.
Section-by-Section Technical Breakdown
La serie HiLobe se comercializa por su fiabilidad, rendimiento y eficiencia. Las características clave del diseño incluyen monitorización inteligente del estado mediante sensores integrados, diseño de motor síncrono encapsulado IE4 herméticamente sellado sin sellos de eje, accionamiento de velocidad variable, geometrías de rotor optimizadas e intervalos de mantenimiento ampliados.
- High up-time due to intelligent condition monitoring via integrated sensors
- High pumping speed and best performance-to-size ratio
- Hermetically sealed synchronous motor (IE4) in canned-motor design, no shaft seals
- Variable speed drive and optimized rotor geometries
- Extended maintenance intervals
Se dispone de una gama de opciones y accesorios de fábrica para los amplificadores HiLobe, que abarcan comunicación, monitorización, refrigeración, electrónica de accionamiento y variantes de instalación.
- Profinet converter
- Barrier gas kit (plastic or stainless steel)
- Gear chamber evacuation
- Flushing device (spray lance)
- Temperature and pressure monitoring (inlet and exhaust side)
- Extension cable package
- OmniControl
- Horizontal version
- Operating fluids
- Electronic drive options: box version, mounting plate for switch cabinet integration, without drive electronics
- Cooling options: convection cooling, active-air cooling, water cooling
Tabla de rendimiento y especificaciones para HiLobe 8103, 11003 y 14003: velocidades de bombeo de 2700 hasta 13540 m³/h, velocidades de rotación 1500-7500 rpm, límites de presión diferencial dependientes de la velocidad, tamaño de brida común DN 250, alimentación 380-480 V AC y unidad de accionamiento electrónica RC 15000. Los datos físicos (dimensiones, peso, agua de refrigeración, tasa de fuga, fluido de funcionamiento) son idénticos en los tres modelos.
- Nominal pumping speed: 2700-8120 m³/h (8103), 2700-10830 m³/h (11003), 2700-13540 m³/h (14003)
- Rotational speed: 1500-4500 rpm (8103), 1500-6000 rpm (11003), 1500-7500 rpm (14003)
- Max. differential pressure at max. speed: 25 hPa (8103), 20 hPa (11003), 10 hPa (14003); 30 hPa at min. speed for all
- Main and secondary flanges: DN 250 ISO-F | DN 250 PN 16 for all models
- Input voltage: 380-480 V AC (±10%), 50/60 Hz; three-phase motor with PTC protection
- Rated power at full speed: 9 kW (8103), 12 kW (11003), 15 kW (14003); recommended mains fuse 50 A
- Electronic drive unit: RC 15000; I/O interfaces PV.can and RS485
- Cooling: water cooling; ambient temperature 5-40 °C; shipping temperature -10-40 °C
- Sound pressure level (EN ISO 2151) at 1 hPa inlet pressure: 70 dB(A)
- Operating fluid: D2, filling 3 l
- Protection degree IP54 / type 12; integral leak rate 1E-06 Pa m³/s
- Dimensions 1115 x 583 x 468 mm; weight approx. 620 kg (all models)
Key Integration, Operating & Safety Requirements
| Specification / Condition | Engineering Implication | Aplica a |
|---|---|---|
| La presión diferencial máx. a la velocidad de rotación máx. es de 25 hPa (HiLobe 8103), 20 hPa (11003) y 10 hPa (14003) p.2 ↗ | Higher-speed models tolerate less pressure differential; for applications needing larger ΔP at high throughput, the 8103 at reduced speed (up to 30 hPa) may be required or a backing pump must handle the compression | whole series (model-specific values) |
| Todos los modelos permiten hasta 30 hPa de presión diferencial cuando se operan a la velocidad de rotación mínima (1500 rpm) p.2 ↗ | Run at reduced speed during crossover/startup phases where fore-vacuum pressure is high, to stay within the ΔP limit | whole series |
| Rango de velocidad de rotación: 1500-4500 rpm (8103), 1500-6000 rpm (11003), 1500-7500 rpm (14003) p.2 ↗ | Matching model to required pumping speed (2700-13540 m³/h) via the variable speed drive rather than oversizing the pump | whole series (model-specific values) |
| Potencia nominal a plena velocidad de rotación: 9 kW, 12 kW y 15 kW para 8103, 11003, 14003 respectivamente; capacidad de fusible de red recomendada 50 A p.2 ↗ | Electrical supply and switchgear must be dimensioned for 15 kW peak with 50 A fusing even for the smaller models if using the shared RC 15000 drive | whole series |
| Tensión de entrada 380-480 V AC ±10%, 50/60 Hz, motor trifásico con protección PTC p.2 ↗ | PTC sensor must be wired into the motor protection circuit; supply tolerance must be verified at site before installation | whole series |
| La unidad de accionamiento electrónica es la RC 15000 con interfaces PV.can y RS485 I/O p.2 ↗ | Control integration must use PV.can or RS485; a Profinet converter accessory is required for Profinet networks | whole series |
| Parámetros de refrigeración por agua: presión 2000-6000 hPa, caudal 120-360 l/h, temperatura del agua 5-35 °C p.3 ↗ | Cooling water circuit (pressure, flow rate and temperature) must be within these limits; cooling option alternatives (convection, active-air) exist for sites without water | whole series (water-cooled standard configuration) |
| Temperatura ambiente 5-40 °C; temperatura de transporte -10-40 °C p.2 ↗ | Installations below 5 °C or storage below -10 °C are out of spec; protect against freezing and cold-start conditions | whole series |
| El fluido de funcionamiento es D2 con un volumen de llenado de 3 l p.3 ↗ | Gear oil specification (Pfeiffer D2) and 3 l quantity must be used for initial fill and oil changes; ordering of operating fluid is via accessories | whole series |
| Tasa de fuga integral 1E-06 Pa m³/s p.3 ↗ | Suitable for high-vacuum systems; leak rate should be factored into base-pressure calculations of the pump stack | whole series |
| Grado de protección IP54 / tipo 12 p.3 ↗ | Suitable for indoor industrial environments with dust and dripping water protection; not for wash-down or outdoor use without additional enclosure | whole series |
| Los tres modelos comparten dimensiones idénticas (1115 x 583 x 468 mm) y peso (aprox. 620 kg) p.3 ↗ | Identical mounting frames, lifting gear and installation footprint can be used across the range; lifting equipment rated ≥620 kg required | whole series |
| Las bridas principal y secundaria son DN 250 ISO-F o DN 250 PN 16 en todos los modelos p.2 ↗ | System piping and adapters must be DN 250 ISO-F (vacuum side) or DN 250 PN 16 (pressure-rated side); identical for inlet and exhaust | whole series |
| Nivel de presión sonora 70 dB(A) (EN ISO 2151) a 1 hPa de presión de entrada para todos los modelos p.3 ↗ | Noise is uniform across the range and generally does not require dedicated acoustic enclosure at typical industrial exposure limits, but verify against workplace regulations | whole series |
| Diseño de motor encapsulado con motor síncrono IE4 herméticamente sellado, sin sellos de eje p.1 ↗ | Eliminates shaft-seal leakage as a failure/contamination point and lowers energy consumption; supports hermetic process containment | whole series |
| Se ofrecen kits opcionales de gas de barrera en versiones de plástico o acero inoxidable; se ofrecen dispositivos de evacuación de la cámara de engranajes y de purga por lanza de pulverización p.1 ↗ | For particulate-laden or condensable processes, specify barrier gas and flushing options at order time; material choice (plastic vs stainless) depends on process chemistry | whole series (options) |