SpeedAir 3050 — product leaflet
Technical Reference Summary
Covered Models & Document Scope
Detector de fugas por aire Pfeiffer Vacuum SpeedAir 3050 para productos líquidos; modelo único, sin códigos de pedido ni variantes indicadas; sensibilidad de hasta 1.0 µm, suministro de aire para válvulas de accionamiento piloto, opciones configurables indicadas solo como 'según configuración'.
Section-by-Section Technical Breakdown
Posicionamiento del SpeedAir 3050 como detector de fugas flexible para una amplia gama de aplicaciones y productos líquidos, mediante técnicas probadas de ensayos no destructivos (NDT). Se afirma que es la tecnología por aire más sensible para productos líquidos en comparación con los detectores de fugas de helio, con resultados repetibles y fiables y menos falsos negativos/positivos.
- Flexible: suitable for a wide range of applications and products
- Proven: based on global NDT analysis techniques (no damage to materials/components)
- Accurate: most sensitive air-based technology for liquid products vs helium leak detectors; repeatable, reliable results, fewer false results
Datos operativos clave: sensibilidad, requisitos de suministro de aire limpio y seco (CDA), condiciones de gas de calibración y de venteo, suministro eléctrico, límites ambientales y funciones de software/interfaz de usuario. Incluye HMI táctil de 10" con software Leak Rx conforme a 21 CFR Part 11.
- Sensitivity: down to 1.0 µm
- CDA supply: air (pilot operated valves), quality 1.3.1 per ISO 8573-1
- CDA pressure: 65–145 psig / 4.5–10 bar rel.; typical consumption 2 Nl/cycle
- Calibration gas: CDA air, 1–20 Torr (pressure listing as printed: 1.3–27 bar abs.)
- Venting gas: N₂, 2–10 psig (as printed: 140–690 bar rel. — likely misprint)
- Power supply: 90–250 V AC, typical consumption 1200 W
- Operating temperature 59–83 °F / 15–45 °C, humidity 30–80 %
- 10" multi-touch full HD color screen; Leak Rx software (21 CFR Part 11, PDF GMP test/calibration reports, local or LDAP domain authentication)
- Operating system: Windows 10
Datos físicos y de interfaz de la unidad: conectividad de red y USB, nivel de ruido, peso y dimensiones totales. Tenga en cuenta que algunos valores dependen de la configuración.
- Network: 1x LAN (RJ45); interfaces: USB, wired Ethernet
- Sound pressure level: <53 dB(A)
- Weight: approx. 280 lbs / 127 kg
- Dimensions (L x W x H): 36 x 24 x 55 inch / 922 x 601 x 1397 mm
- Values marked * depend on configuration
Key Integration, Operating & Safety Requirements
| Specification / Condition | Engineering Implication | Aplica a |
|---|---|---|
| Sensibilidad de detección de fugas de hasta 1.0 µm p.2 ↗ | Sets the minimum detectable defect size for test-part qualification; defects smaller than 1 µm will not be detected. | SpeedAir 3050 |
| Requiere CDA según ISO 8573-1 clase de calidad 1.3.1, 65–145 psig (4.5–10 bar rel.), válvulas de accionamiento piloto p.2 ↗ | Facility compressed air must meet particle/water/oil class 1.3.1 and a pressure regulator within 4.5–10 bar rel. is mandatory before installation. | SpeedAir 3050 |
| El consumo típico de CDA es de 2 Nl por ciclo p.2 ↗ | Allows sizing of plant air supply and estimating cost per test cycle. | SpeedAir 3050 |
| El suministro de gas de calibración es aire CDA a 1–20 Torr p.2 ↗ | No external calibration gas bottles needed; supply line must be regulated to the specified Torr range. | SpeedAir 3050 |
| El gas de venteo es N₂ a 2–10 psig p.2 ↗ | A regulated nitrogen line must be plumbed to the unit; pressure shown as '140–690 bar rel.' in the document appears to be a misprint and should be verified with the manufacturer. | SpeedAir 3050 |
| Alimentación eléctrica 90–250 V AC con consumo típico de 1200 W p.2 ↗ | Wide-range AC input simplifies global deployment; provision ≥1200 W circuit capacity per unit. | SpeedAir 3050 |
| Temperatura de funcionamiento 15–45 °C (59–83 °F) y humedad 30–80 % p.2 ↗ | Installation environment (production floor, testing cell) must stay within these limits; not suitable for unconditioned hot/cold areas. | SpeedAir 3050 |
| Peso aprox. 127 kg (280 lbs) y dimensiones 922 x 601 x 1397 mm p.3 ↗ | Requires appropriate handling equipment or casters/foundation planning and floor space of roughly 0.92 x 0.60 m footprint with 1.4 m height clearance. | SpeedAir 3050 |
| Nivel de presión sonora inferior a 53 dB(A) p.3 ↗ | Can be installed near operators without additional acoustic enclosure. | SpeedAir 3050 |
| Conectividad: 1x LAN (RJ45), USB, Ethernet cableado; funciona con Windows 10 p.2 ↗ | Plan plant network integration and IT security (Windows 10 endpoint) for data exchange and remote reporting. | SpeedAir 3050 |
| Software Leak Rx con conformidad con 21 CFR Part 11, informes de prueba y calibración GMP en PDF, autenticación local o de dominio LDAP p.2 ↗ | Suitable for GMP-regulated (pharma) production environments; user management can be tied to corporate LDAP/Active Directory. | SpeedAir 3050 |
| La HMI es una pantalla en color full HD multitáctil de 10" p.2 ↗ | Operator interface is touch-based; plan enclosure/access layout accordingly, no external monitor required. | SpeedAir 3050 |