В исходной таблице заголовки Transition и CE (ev) повторяются для квантификатора и квалификатора; в восстановленной таблице они объединены в колонки Quantifier/CE (ev) и Qualifier/CE (ev). Для Chlorpyrifos-(diethyl-d10) (ISTD) значение CF R2 отсутствует.
Параметры мониторинга (MRM) пестицидов: время удерживания, переходы квантификатора и квалификатора, энергии соударения и коэффициент корреляции
Name
RT (min)
Quantifier
CE (ev)
Qualifier
CE (ev)
CF R2
Metazachlor
10.568
209.0 & 132.2
15
209.0 & 133.2
10
0.999
Penconazole
10.600
248.0 & 157.1
25
248.0 & 192.1
15
0.999
Heptachlor exo-epoxide
10.655
352.8 & 262.9
15
354.8 & 264.9
15
0.999
Isofenphos
10.708
212.9 & 121.1
10
212.9 & 185.1
5
0.999
Bromfenvinfos
10.712
266.9 & 159.1
15
322.8 & 266.9
10
0.999
Chlorfenvinphos
10.712
266.9 & 159.0
20
266.9 & 203.0
10
0.999
Heptachlor endo-epoxide
10.732
135.0 & 99.0
15
183.0 & 119.0
30
0.999
Quinalphos
10.777
146.0 & 118.0
10
157.0 & 129.1
15
1.000
Phenthoate
10.779
274.0 & 121.0
10
274.0 & 125.0
15
0.999
Triadimenol
10.793
168.0 & 70.0
10
128.0 & 65.0
25
0.999
Furalaxyl
10.831
242.0 & 95.0
15
152.0 & 59.0
10
0.999
Haloxyfop-methyl
10.991
375.1 & 316.0
10
288.0 & 180.0
25
0.999
Bromophos-ethyl
11.065
358.7 & 302.8
15
358.7 & 330.8
5
0.999
Chlordane-trans
11.072
271.7 & 236.9
15
374.8 & 265.8
15
0.999
DDE-o,p'
11.118
246.0 & 176.2
30
248.0 & 176.2
30
1.000
Paclobutrazol
11.152
236.0 & 125.1
10
236.0 & 167.1
10
0.999
Tetrachlorvinphos
11.211
329.0 & 108.9
25
329.0 & 78.9
40
0.999
Mepanipyrim
11.252
223.2 & 222.2
10
222.2 & 207.2
15
0.999
Chlordane-cis
11.341
271.8 & 236.9
15
372.8 & 300.9
10
0.999
Picoxystrobin
11.354
145.0 & 102.1
25
145.0 & 117.1
10
1.000
Flutriafol
11.376
219.1 & 123.1
15
123.1 & 75.1
25
0.999
Fenamiphos
11.442
217.0 & 202.1
10
302.9 & 153.9
15
0.999
Flutolanil
11.452
280.9 & 173.0
10
173.0 & 95.0
30
0.999
Iodofenphos
11.518
376.8 & 361.8
15
376.8 & 92.9
30
0.999
Prothiofos
11.547
308.9 & 238.9
15
266.9 & 221.0
20
0.999
Isoprothiolane
11.550
162.1 & 85.0
20
231.0 & 189.1
10
0.999
Profenofos
11.602
338.8 & 268.7
15
207.9 & 63.0
30
0.999
Pretilachlor
11.635
162.1 & 132.2
20
262.0 & 202.2
5
0.999
DDE-p,p'
11.672
246.1 & 176.2
30
315.8 & 246.0
15
1.000
Uniconazole
11.690
234.1 & 165.1
10
234.1 & 137.0
15
0.999
Oxadiazon
11.697
174.9 & 112.0
15
257.8 & 175.1
5
1.000
Dieldrin
11.767
262.9 & 193.0
35
277.0 & 241.0
5
0.999
Myclobutanil
11.809
179.0 & 125.1
10
179.0 & 90.0
30
0.999
Buprofezin
11.832
104.0 & 77.0
10
249.1 & 193.0
10
0.999
DDD-o,p'
11.836
235.0 & 165.1
25
235.0 & 200.1
10
1.000
Kresoxim-methyl
11.872
116.0 & 89.0
15
206.0 & 116.0
5
1.000
Bupirimate
11.885
272.9 & 193.1
5
272.9 & 108.0
15
0.999
Triclopyr-2-butoxyethyl ester
11.887
209.9 & 146.0
15
254.9 & 181.9
5
0.999
Azaconazole
11.921
217.0 & 173.1
15
219.0 & 175.0
15
0.999
Fluazifop-p-butyl
12.042
281.9 & 238.0
15
281.9 & 91.0
15
0.999
В исходной таблице заголовки 'Transition' и 'CE (ev)' повторяются для квантификатора и квалификатора; здесь они объединены в колонки 'Quantifier'/'CE (ev)' и 'Qualifier'/'CE (ev)'.
Таблица идентификации пестицидов: время удерживания, квантификатор и квалификатор с энергиями соударения и коэффициентом корреляции
Name
RT (min)
Quantifier Transition
Quantifier CE (ev)
Qualifier Transition
Qualifier CE (ev)
CF R2
DDD-p,p'
12.431
237.0 & 165.1
25
237.0 & 200.1
15
0.999
DDT-o,p'
12.431
235.0 & 165.2
20
237.0 & 165.2
20
0.999
Fenthion sulfone
12.433
124.9 & 47.0
10
309.9 & 105.0
10
0.999
Ethion
12.488
230.9 & 175.0
10
152.9 & 96.9
10
0.999
Oxadixyl
12.515
163.0 & 132.1
5
232.9 & 146.1
10
0.999
Chlorthiophos
12.539
324.8 & 268.9
10
268.9 & 205.1
15
0.999
Tetrasul
12.636
321.7 & 252.0
15
323.9 & 253.9
15
0.999
Sulprofos
12.707
140.0 & 125.1
15
321.9 & 155.9
10
1.000
Triazophos
12.723
161.2 & 134.2
5
257.0 & 162.1
5
0.999
Carbophenothion
12.891
153.0 & 96.9
10
342.0 & 157.0
10
0.999
Cyanofenphos
12.962
169.0 & 141.1
5
169.0 & 77.1
25
0.999
Quinoxyfen
12.989
237.0 & 208.1
30
306.8 & 237.0
20
1.000
Edifenphos
12.999
309.9 & 172.9
10
309.9 & 108.9
25
0.996
Trifloxystrobin
13.015
116.0 & 89.0
15
116.0 & 63.0
30
1.000
Lenacil
13.047
153.1 & 136.1
15
153.1 & 110.1
20
1.000
Endosulfan sulfate
13.090
271.9 & 237.0
20
273.8 & 238.9
15
0.998
DDT-p,p'
13.097
235.0 & 165.2
20
237.0 & 165.2
20
0.999
Diflufenican
13.373
393.9 & 265.9
10
266.0 & 246.1
15
0.999
Piperonyl butoxide
13.445
176.1 & 103.1
25
176.1 & 131.1
15
1.000
Epoxiconazole
13.654
192.0 & 138.1
10
192.0 & 111.0
25
0.999
Spiromesifen
13.789
272.0 & 254.2
5
272.0 & 209.2
10
0.999
Pyridaphenthion
13.881
340.0 & 199.0
5
204.0 & 203.1
5
0.998
Endrin ketone
13.943
316.9 & 101.0
15
316.9 & 245.0
20
0.999
Bifenthrin
13.990
181.2 & 165.2
25
181.2 & 166.2
10
1.000
Bromopropylate
13.992
340.8 & 182.9
20
340.8 & 184.9
20
0.999
EPN
14.018
169.0 & 77.1
25
141.0 & 77.1
15
0.995
Methoxychlor, p,p'-
14.101
227.0 & 169.1
25
227.0 & 141.1
40
0.999
Fenpropathrin
14.117
264.9 & 210.0
10
207.9 & 181.0
5
0.999
Etoxazole
14.154
141.0 & 63.1
30
141.0 & 113.0
15
1.000
Dicofol, p, p'-
14.155
141.0 & 63.0
32
141.0 & 113.0
15
1.000
Fenamidone
14.234
238.0 & 237.2
10
268.0 & 77.1
35
0.999
Fenazaquin
14.280
160.0 & 145.2
5
145.0 & 117.1
10
0.999
Anilofos
14.352
225.9 & 157.0
10
225.9 & 184.0
5
0.999
Tetradifon
14.498
226.9 & 199.0
15
158.9 & 111.0
20
0.999
Triticonazole
14.620
234.8 & 217.1
5
234.8 & 182.1
10
0.999
Phosalone
14.666
182.0 & 111.0
15
182.0 & 75.0
35
0.999
Leptophos
14.713
171.0 & 77.1
15
376.8 & 361.8
20
0.999
Cyhalothrin (Lambda)
14.767
208.1 & 181.1
10
181.1 & 152.1
30
0.999
Cyhalofop-butyl
14.770
256.2 & 120.1
10
357.1 & 256.1
10
0.999
Mirex
14.943
271.8 & 236.8
20
236.9 & 142.9
30
0.999
Заголовки Transition и CE (ev) повторяются для квантификатора и квалификатора; в таблице приведены как Quantifier Transition, Quantifier CE (ev), Qualifier Transition, Qualifier CE (ev).
В исходной таблице заголовки Transition и CE (ev) повторяются дважды: для Quantifier и Qualifier.
Engineering Facts
13 facts · every claim linked to a page
Selection
The method targets 197 pesticides in a difficult durian matrix, so the GC/TQ and sampler must be chosen for high sensitivity and robustness in sulfur-rich, high-fat samples.
Defines the analytical scope and performance class required when selecting the GC/MS/MS system.
Source
“sensitive and robust quantitation of 197 pesticides in durian with an Agilent 7000E Triple Quadrupole Mass Spectrometer (GC/TQ)”
Selection
The sample prep uses a QuEChERS EN extraction kit followed by a highly pigmented dispersive SPE cleanup, which is the consumables set to specify for this matrix.
Determines the consumables and cleanup chemistry needed for durian and similar pigmented, fatty matrices.
Source
“sample extraction with an Agilent Bond Elut QuEChERS EN extraction kit, followed by Agilent Bond Elut QuEChERS Highly Pigmented dispersive SPE kit”
Cumplimiento
The method is validated against EURL SANTE/11312/2021 criteria, so the acceptance limits for recovery, precision and LOQ must be built into the method validation plan.
Sets the regulatory pass/fail criteria the installed method must meet.
Source
“Laboratories need to achieve recoveries between 70% to 120%, precision (RSD) below 20%, and quantification limits at or below regulatory maximum residue limits (MRLs)”
Operation
Both pulp and shell are sampled at a 1:1 weight ratio, so the homogenization procedure must represent both edible and outer parts of the fruit.
Defines the sampling protocol that must be followed to make results representative.
Source
“A representative portion of fresh durian and its shell was collected at a 1:1 weight ratio”
Operation
The final extract is reconstituted in acetone/hexane 1:1 and filtered through a 0.22 µm nylon membrane, which must match the autosampler and column compatibility.
Specifies the final solvent and filtration needed before injection to avoid particulates and solvent mismatch.
Source
“The final extract was reconstituted in acetone/hexane (1:1, v/v) and filtered through a 0.22 µm nylon membrane filter.”
Selection
Matrix-optimized MRMs are used because selectivity of specific MRMs can vary with matrix, so multiple transitions per compound should be available.
Justifies choosing a method/database with multiple MRM transitions per analyte for complex matrices.
Source
“Having access to multiple MRM transitions per compound allows analysts to select the most appropriate ones for”
Installation
The GC uses two 15 m × 0.25 mm, 0.25 µm HP-5Q columns with different column flows, so the plumbing and flow setup must support a dual-column configuration.
Determines column selection and the need for two independent column flows during installation.
Source
“Agilent HP-5Q, two 15 m × 0.25 mm, 0.25 µm column (p/n 19091S-431Q)”
Installation
A cold splitless injector with a specific temperature program and an ultra inert fritted splitless liner is required, so the inlet hardware and liner part number must match.
Specifies the exact inlet liner and cold splitless configuration needed for reproducible injection.
The oven program runs from 60 °C to 310 °C with defined ramps and a 3 min equilibration, which must be entered exactly for retention time and MRM timing.
Defines the GC temperature program that governs separation and RT alignment with the MRM table.
Source
“60 °C for 1 min, 40 °C/min to 170 °C, 10 °C/min to 310 °C, hold 3.0 min”
Operation
The mass spectrometer uses dMRM with gain 10, helium quench at 2.25 mL/min and nitrogen collision gas at 1.5 mL/min, so gas supplies and pressures must be set accordingly.
Specifies quench gas flow required for correct dMRM operation and sensitivity.
Source
“He Quench Gas 2.25 mL/min”
Performance
Matrix-matched calibration is linear with R2 > 0.995 from 3 to 100 ppb, so the calibration range and matrix matching must be implemented for quantitation.
Defines the validated calibration range and the need for matrix-matched standards.
Source
“matrix-matched linearity with an R2 > 0.995 over a calibration range of 3 to 100 ppb for all target pesticides”
Performance
At 10 ppb post-spike, all pesticides met 80–120% accuracy and RSD below 10% with 10 replicates, which are the expected performance benchmarks after installation.
Provides the acceptance benchmark for method accuracy at low level after commissioning.
Source
“100% of the pesticides had analysis accuracy between 80% and 120% at 10 ppb in durian”
Maintenance
The transfer line, ion source and quadrupole are held at 280 °C, 280 °C and 150 °C respectively, so these temperatures must be verified during service and tuning.
Gives the setpoints to check during maintenance and troubleshooting of the MS interface.