Induztr
Résumé technique Visionneuse de documents Modèles associés

Analysis of 197 Pesticides in Durian

Sommaire

  1. Overview pp. 1-2
    Introduction to pesticide analysis in durian and method purpose
  2. Config. p. 3
    PAL 3 RTC and 7000E system setup and components
  3. p. 4
    Analytical results and discussion of findings
  4. Spec pp. 5-9
    Detailed tables of pesticide names and parameters
  5. Spec pp. 10-17
    Additional reference data and chromatograms
  6. p. 18
    Bibliographic references and citations
  7. p. 3 table, 24 rows
  8. p. 5 table, 40 rows
  9. p. 6 table, 40 rows
  10. p. 7 table, 40 rows
  11. p. 8 table, 40 rows
  12. p. 9 table, 15 rows

Table 1. Agilent PAL 3 autosampler and GC/TQ parameters for pesticide analysis.

ParameterValue
Agilent PAL 3 (Liquid Tool)
Syringe Type10 µL (p/n 8010-1307)
Injection Volume2 µL
Gas Chromatography
ModelAgilent 8890 GC
GC ColumnAgilent HP-5Q, two 15 m × 0.25 mm, 0.25 µm column (p/n 19091S-431Q)
Column PneumaticsConstant flow
Carrier GasHelium
Injector ModeCold splitless
Purge Flow to Split Vent50 mL/min at 1.5 min
Inlet Temperature60 °C for 0.1 min, then to 280 °C at 900 °C/min
Injector LinerAgilent Ultra Inert fritted splitless liner (p/n 5190-5112)
Flow RateColumn 1: 1.28 mL/min Column 2: 1.54 mL/min
Oven Temperature Program60 °C for 1 min, 40 °C/min to 170 °C, 10 °C/min to 310 °C, hold 3.0 min
Equilibration Time3 min
Mass Spectrometer
ModelAgilent 7000E
Acquisition ModedMRM
Gain10
He Quench Gas2.25 mL/min
N2 Collision Gas1.5 mL/min
Transfer Line Temperature280 °C
Ion Source Temperature280 °C
Quad Temperature150 °C

Appendix 1 GC/TQ MRM parameters of target and ISTD compounds and calibration performance

NameRT (min)Quantifier TransitionQuantifier CE (ev)Qualifier TransitionQualifier CE (ev)CF R2
Methamidophos4.582141.0 & 95.05141.0 & 64.0250.999
Dichlorvos4.652109.0 & 79.05184.9 & 93.0101.000
Disulfoton-sulfoxide5.06996.9 & 64.920125.0 & 96.950.995
Mevinphos, E-5.592127.0 & 109.010127.0 & 94.9151.000
2-Phenylphenol6.253169.1 & 115.130169.1 & 141.1151.000
Heptenophos6.613124.0 & 89.010124.0 & 63.0351.000
Omethoate6.773156.0 & 79.025156.0 & 110.0100.998
Propoxur6.849110.0 & 63.025110.0 & 64.0150.996
Propachlor6.897120.0 & 77.120176.1 & 57.151.000
Ethoprophos7.030157.9 & 97.015157.9 & 114.051.000
Chlorpropham7.123213.0 & 171.15213.0 & 127.1100.999
Chlordimeform7.232151.9 & 117.110117.0 & 89.0301.000
Trifluralin7.257264.0 & 206.05306.1 & 264.050.999
Dicrotofos7.278127.0 & 109.015193.0 & 127.150.999
Monocrotophos7.283127.1 & 109.010127.1 & 95.0150.999
Dioxabenzofos7.369215.9 & 201.010215.9 & 138.0100.999
Cadusafos7.444158.8 & 97.015157.9 & 96.9151.000
BHC-alpha (benzene hexachloride)7.654216.9 & 181.05218.9 & 183.050.999
Hexachlorobenzene7.787283.8 & 213.930283.8 & 248.8151.000
Trimethacarb, 3,4,5-7.802136.0 & 121.110136.0 & 77.1300.998
Dimethoate7.82187.0 & 46.020125.0 & 47.0151.000
Prometon7.823210.0 & 168.15224.9 & 58.1150.999
Dichloran7.823206.1 & 176.010160.1 & 124.1100.998
Simazine7.846201.1 & 173.15201.1 & 186.250.999
Atrazine7.918214.9 & 200.25200.0 & 122.150.999
Propazine7.981214.2 & 172.210229.1 & 58.1100.999
Terbumeton8.005169.0 & 154.15225.1 & 169.200.999
Clomazone8.006125.0 & 89.015204.1 & 107.1201.000
Propetamphos8.118138.0 & 110.010138.0 & 64.0150.999
Profluralin8.131318.1 & 55.115318.1 & 199.1150.998
Terbuthylazine8.156228.9 & 173.15172.9 & 138.151.000
BHC-gamma (Lindane, gamma HCH)8.167218.9 & 183.15216.9 & 181.050.999
Trietazine8.172229.1 & 200.010229.1 & 186.1100.999
Terbufos8.178230.9 & 129.020230.9 & 185.050.999
Cyanophos8.189242.9 & 109.010124.9 & 79.050.999
Propyzamide8.208173.1 & 109.030173.0 & 74.0451.000
Pentachloronitrobenzene8.244248.8 & 213.815294.8 & 236.8150.999
Fonofos8.273246.1 & 109.015246.1 & 137.050.999
Diazinon8.310137.1 & 84.010199.1 & 93.0150.999
Pyrimethanil8.314198.0 & 118.135198.0 & 158.1201.000

Параметры мониторинга пестицидов (RT, квантификатор, квалификатор, CF R2, переходы и CE)

NameRT (min)QuantifierCE (ev)QualifierCE (ev)CF R2
Secbumeton8.476196.0 & 85.010196.0 & 94.0200.999
Isazofos8.551161.0 & 119.15256.9 & 162.050.999
Etrimfos8.568292.1 & 181.15292.1 & 153.1250.999
Pirimicarb8.761238.0 & 166.210166.0 & 96.0150.999
Fenchlorphos oxon8.865268.9 & 254.015270.9 & 256.0150.999
Propanil8.991161.0 & 99.030217.0 & 160.9100.999
Dimethachlor9.030196.9 & 148.210134.1 & 105.1100.999
Metribuzin9.041198.0 & 82.015198.0 & 55.0300.999
Dimethenamid9.051230.0 & 154.110232.0 & 154.1100.999
Prothoate9.088115.0 & 73.05115.0 & 46.0201.000
Acetochlor9.118222.9 & 132.220174.0 & 146.1100.999
Parathion-methyl9.172125.0 & 47.010262.9 & 109.0100.999
Chlorpyrifos-methyl9.172124.9 & 47.015285.9 & 93.0250.999
Tolclofos-methyl9.258267.0 & 252.015267.0 & 93.0300.999
Ametryn9.283227.0 & 58.110227.0 & 170.1101.000
Alachlor9.289188.1 & 160.110188.1 & 132.1201.000
Prometryn9.334226.0 & 184.210241.0 & 184.2100.999
Heptachlor9.359271.7 & 236.915273.7 & 238.9150.999
Metalaxyl9.366234.0 & 146.120248.8 & 190.151.000
Ronnel9.420285.0 & 269.915285.0 & 93.0250.999
Dicofol, o, p'-9.570139.0 & 111.010139.0 & 75.0301.000
Pirimiphos-methyl9.623290.0 & 125.020304.9 & 180.051.000
Fenitrothion9.629277.0 & 260.15277.0 & 109.0150.997
Pentanochlor9.659141.0 & 106.115143.0 & 106.1151.000
Malathion9.771172.9 & 99.015157.8 & 125.051.000
Pentachlorothioanisole9.784295.8 & 262.815295.8 & 245.8400.999
Chlorpyrifos-(diethyl-d10) (ISTD)9.920324.0 & 260.015199.9 & 172.015
Metolachlor9.933238.0 & 162.210238.0 & 133.2300.999
Fenpropimorph9.940128.1 & 70.110128.1 & 110.151.000
Fenthion9.960278.0 & 109.015278.0 & 169.0150.999
Aldrin9.966262.9 & 192.935264.9 & 192.9350.999
Dimethylvinphos9.976294.9 & 108.915296.9 & 108.9150.999
Chlorpyrifos9.990196.9 & 169.015313.8 & 257.8150.999
Parathion10.010291.0 & 109.015291.0 & 81.0350.998
Triadimefon10.046208.0 & 181.15208.0 & 111.0200.999
DCPA (Dacthal, Chlorthal-dimethyl)10.094298.9 & 221.025300.9 & 223.0251.000
Tetraconazole10.110336.0 & 217.920336.0 & 203.8300.999
Isocarbophos10.120135.9 & 108.015135.9 & 69.0300.999
Crufomate10.220256.0 & 226.025275.9 & 182.150.999
Isobenzan10.225274.7 & 240.015310.7 & 274.850.999

В исходной таблице заголовки Transition и CE (ev) повторяются для квантификатора и квалификатора; в восстановленной таблице они объединены в колонки Quantifier/CE (ev) и Qualifier/CE (ev). Для Chlorpyrifos-(diethyl-d10) (ISTD) значение CF R2 отсутствует.

Параметры мониторинга (MRM) пестицидов: время удерживания, переходы квантификатора и квалификатора, энергии соударения и коэффициент корреляции

NameRT (min)QuantifierCE (ev)QualifierCE (ev)CF R2
Metazachlor10.568209.0 & 132.215209.0 & 133.2100.999
Penconazole10.600248.0 & 157.125248.0 & 192.1150.999
Heptachlor exo-epoxide10.655352.8 & 262.915354.8 & 264.9150.999
Isofenphos10.708212.9 & 121.110212.9 & 185.150.999
Bromfenvinfos10.712266.9 & 159.115322.8 & 266.9100.999
Chlorfenvinphos10.712266.9 & 159.020266.9 & 203.0100.999
Heptachlor endo-epoxide10.732135.0 & 99.015183.0 & 119.0300.999
Quinalphos10.777146.0 & 118.010157.0 & 129.1151.000
Phenthoate10.779274.0 & 121.010274.0 & 125.0150.999
Triadimenol10.793168.0 & 70.010128.0 & 65.0250.999
Furalaxyl10.831242.0 & 95.015152.0 & 59.0100.999
Haloxyfop-methyl10.991375.1 & 316.010288.0 & 180.0250.999
Bromophos-ethyl11.065358.7 & 302.815358.7 & 330.850.999
Chlordane-trans11.072271.7 & 236.915374.8 & 265.8150.999
DDE-o,p'11.118246.0 & 176.230248.0 & 176.2301.000
Paclobutrazol11.152236.0 & 125.110236.0 & 167.1100.999
Tetrachlorvinphos11.211329.0 & 108.925329.0 & 78.9400.999
Mepanipyrim11.252223.2 & 222.210222.2 & 207.2150.999
Chlordane-cis11.341271.8 & 236.915372.8 & 300.9100.999
Picoxystrobin11.354145.0 & 102.125145.0 & 117.1101.000
Flutriafol11.376219.1 & 123.115123.1 & 75.1250.999
Fenamiphos11.442217.0 & 202.110302.9 & 153.9150.999
Flutolanil11.452280.9 & 173.010173.0 & 95.0300.999
Iodofenphos11.518376.8 & 361.815376.8 & 92.9300.999
Prothiofos11.547308.9 & 238.915266.9 & 221.0200.999
Isoprothiolane11.550162.1 & 85.020231.0 & 189.1100.999
Profenofos11.602338.8 & 268.715207.9 & 63.0300.999
Pretilachlor11.635162.1 & 132.220262.0 & 202.250.999
DDE-p,p'11.672246.1 & 176.230315.8 & 246.0151.000
Uniconazole11.690234.1 & 165.110234.1 & 137.0150.999
Oxadiazon11.697174.9 & 112.015257.8 & 175.151.000
Dieldrin11.767262.9 & 193.035277.0 & 241.050.999
Myclobutanil11.809179.0 & 125.110179.0 & 90.0300.999
Buprofezin11.832104.0 & 77.010249.1 & 193.0100.999
DDD-o,p'11.836235.0 & 165.125235.0 & 200.1101.000
Kresoxim-methyl11.872116.0 & 89.015206.0 & 116.051.000
Bupirimate11.885272.9 & 193.15272.9 & 108.0150.999
Triclopyr-2-butoxyethyl ester11.887209.9 & 146.015254.9 & 181.950.999
Azaconazole11.921217.0 & 173.115219.0 & 175.0150.999
Fluazifop-p-butyl12.042281.9 & 238.015281.9 & 91.0150.999

В исходной таблице заголовки 'Transition' и 'CE (ev)' повторяются для квантификатора и квалификатора; здесь они объединены в колонки 'Quantifier'/'CE (ev)' и 'Qualifier'/'CE (ev)'.

Таблица идентификации пестицидов: время удерживания, квантификатор и квалификатор с энергиями соударения и коэффициентом корреляции

NameRT (min)Quantifier TransitionQuantifier CE (ev)Qualifier TransitionQualifier CE (ev)CF R2
DDD-p,p'12.431237.0 & 165.125237.0 & 200.1150.999
DDT-o,p'12.431235.0 & 165.220237.0 & 165.2200.999
Fenthion sulfone12.433124.9 & 47.010309.9 & 105.0100.999
Ethion12.488230.9 & 175.010152.9 & 96.9100.999
Oxadixyl12.515163.0 & 132.15232.9 & 146.1100.999
Chlorthiophos12.539324.8 & 268.910268.9 & 205.1150.999
Tetrasul12.636321.7 & 252.015323.9 & 253.9150.999
Sulprofos12.707140.0 & 125.115321.9 & 155.9101.000
Triazophos12.723161.2 & 134.25257.0 & 162.150.999
Carbophenothion12.891153.0 & 96.910342.0 & 157.0100.999
Cyanofenphos12.962169.0 & 141.15169.0 & 77.1250.999
Quinoxyfen12.989237.0 & 208.130306.8 & 237.0201.000
Edifenphos12.999309.9 & 172.910309.9 & 108.9250.996
Trifloxystrobin13.015116.0 & 89.015116.0 & 63.0301.000
Lenacil13.047153.1 & 136.115153.1 & 110.1201.000
Endosulfan sulfate13.090271.9 & 237.020273.8 & 238.9150.998
DDT-p,p'13.097235.0 & 165.220237.0 & 165.2200.999
Diflufenican13.373393.9 & 265.910266.0 & 246.1150.999
Piperonyl butoxide13.445176.1 & 103.125176.1 & 131.1151.000
Epoxiconazole13.654192.0 & 138.110192.0 & 111.0250.999
Spiromesifen13.789272.0 & 254.25272.0 & 209.2100.999
Pyridaphenthion13.881340.0 & 199.05204.0 & 203.150.998
Endrin ketone13.943316.9 & 101.015316.9 & 245.0200.999
Bifenthrin13.990181.2 & 165.225181.2 & 166.2101.000
Bromopropylate13.992340.8 & 182.920340.8 & 184.9200.999
EPN14.018169.0 & 77.125141.0 & 77.1150.995
Methoxychlor, p,p'-14.101227.0 & 169.125227.0 & 141.1400.999
Fenpropathrin14.117264.9 & 210.010207.9 & 181.050.999
Etoxazole14.154141.0 & 63.130141.0 & 113.0151.000
Dicofol, p, p'-14.155141.0 & 63.032141.0 & 113.0151.000
Fenamidone14.234238.0 & 237.210268.0 & 77.1350.999
Fenazaquin14.280160.0 & 145.25145.0 & 117.1100.999
Anilofos14.352225.9 & 157.010225.9 & 184.050.999
Tetradifon14.498226.9 & 199.015158.9 & 111.0200.999
Triticonazole14.620234.8 & 217.15234.8 & 182.1100.999
Phosalone14.666182.0 & 111.015182.0 & 75.0350.999
Leptophos14.713171.0 & 77.115376.8 & 361.8200.999
Cyhalothrin (Lambda)14.767208.1 & 181.110181.1 & 152.1300.999
Cyhalofop-butyl14.770256.2 & 120.110357.1 & 256.1100.999
Mirex14.943271.8 & 236.820236.9 & 142.9300.999

Заголовки Transition и CE (ev) повторяются для квантификатора и квалификатора; в таблице приведены как Quantifier Transition, Quantifier CE (ev), Qualifier Transition, Qualifier CE (ev).

Таблица характеристик соединений (RT, Quantifier, Qualifier, CF R2, Transition, CE)

NameRT (min)QuantifierCE (ev)QualifierCE (ev)CF R2
Permethrin, (1R)-trans-15.820183.1 & 168.110163.0 & 127.050.997
Pyridaben15.862147.2 & 117.120147.2 & 132.2101.000
Coumaphos15.958361.9 & 109.015225.9 & 163.1150.999
Cyfluthrin I16.268162.9 & 127.05198.9 & 170.1250.999
Fenbuconazole16.322197.9 & 129.05128.9 & 102.1150.999
Cypermethrin I16.578163.0 & 127.05164.9 & 127.050.999
Boscalid16.681140.0 & 112.010341.9 & 139.9151.000
Quizalofop-ethyl16.743371.8 & 298.910163.0 & 100.0200.999
Ethofenprox16.869163.0 & 107.120163.0 & 135.1101.000
Pyridalyl16.895204.0 & 148.025204.0 & 176.0100.999
Bixafen17.062413.0 & 159.012159.0 & 139.0150.999
Fenvalerate I17.500167.0 & 125.15224.9 & 119.0150.999
Difenoconazole I17.910322.8 & 264.815324.8 & 266.8150.999
Deltamethrin18.229250.7 & 172.05252.9 & 174.050.997
Tolfenpyrad18.619197.2 & 91.120383.0 & 171.0250.999

В исходной таблице заголовки Transition и CE (ev) повторяются дважды: для Quantifier и Qualifier.

Engineering Facts

13 facts · every claim linked to a page
Selection

The method targets 197 pesticides in a difficult durian matrix, so the GC/TQ and sampler must be chosen for high sensitivity and robustness in sulfur-rich, high-fat samples.

Defines the analytical scope and performance class required when selecting the GC/MS/MS system.

Source
“sensitive and robust quantitation of 197 pesticides in durian with an Agilent 7000E Triple Quadrupole Mass Spectrometer (GC/TQ)”
Selection

The sample prep uses a QuEChERS EN extraction kit followed by a highly pigmented dispersive SPE cleanup, which is the consumables set to specify for this matrix.

Determines the consumables and cleanup chemistry needed for durian and similar pigmented, fatty matrices.

Source
“sample extraction with an Agilent Bond Elut QuEChERS EN extraction kit, followed by Agilent Bond Elut QuEChERS Highly Pigmented dispersive SPE kit”
Conformité

The method is validated against EURL SANTE/11312/2021 criteria, so the acceptance limits for recovery, precision and LOQ must be built into the method validation plan.

Sets the regulatory pass/fail criteria the installed method must meet.

Source
“Laboratories need to achieve recoveries between 70% to 120%, precision (RSD) below 20%, and quantification limits at or below regulatory maximum residue limits (MRLs)”
Operation

Both pulp and shell are sampled at a 1:1 weight ratio, so the homogenization procedure must represent both edible and outer parts of the fruit.

Defines the sampling protocol that must be followed to make results representative.

Source
“A representative portion of fresh durian and its shell was collected at a 1:1 weight ratio”
Operation

The final extract is reconstituted in acetone/hexane 1:1 and filtered through a 0.22 µm nylon membrane, which must match the autosampler and column compatibility.

Specifies the final solvent and filtration needed before injection to avoid particulates and solvent mismatch.

Source
“The final extract was reconstituted in acetone/hexane (1:1, v/v) and filtered through a 0.22 µm nylon membrane filter.”
Selection

Matrix-optimized MRMs are used because selectivity of specific MRMs can vary with matrix, so multiple transitions per compound should be available.

Justifies choosing a method/database with multiple MRM transitions per analyte for complex matrices.

Source
“Having access to multiple MRM transitions per compound allows analysts to select the most appropriate ones for”
Installation

The GC uses two 15 m × 0.25 mm, 0.25 µm HP-5Q columns with different column flows, so the plumbing and flow setup must support a dual-column configuration.

Determines column selection and the need for two independent column flows during installation.

Source
“Agilent HP-5Q, two 15 m × 0.25 mm, 0.25 µm column (p/n 19091S-431Q)”
Installation

A cold splitless injector with a specific temperature program and an ultra inert fritted splitless liner is required, so the inlet hardware and liner part number must match.

Specifies the exact inlet liner and cold splitless configuration needed for reproducible injection.

Source
“Agilent Ultra Inert fritted splitless liner (p/n 5190-5112)”
Operation

The oven program runs from 60 °C to 310 °C with defined ramps and a 3 min equilibration, which must be entered exactly for retention time and MRM timing.

Defines the GC temperature program that governs separation and RT alignment with the MRM table.

Source
“60 °C for 1 min, 40 °C/min to 170 °C, 10 °C/min to 310 °C, hold 3.0 min”
Operation

The mass spectrometer uses dMRM with gain 10, helium quench at 2.25 mL/min and nitrogen collision gas at 1.5 mL/min, so gas supplies and pressures must be set accordingly.

Specifies quench gas flow required for correct dMRM operation and sensitivity.

Source
“He Quench Gas 2.25 mL/min”
Performance

Matrix-matched calibration is linear with R2 > 0.995 from 3 to 100 ppb, so the calibration range and matrix matching must be implemented for quantitation.

Defines the validated calibration range and the need for matrix-matched standards.

Source
“matrix-matched linearity with an R2 > 0.995 over a calibration range of 3 to 100 ppb for all target pesticides”
Performance

At 10 ppb post-spike, all pesticides met 80–120% accuracy and RSD below 10% with 10 replicates, which are the expected performance benchmarks after installation.

Provides the acceptance benchmark for method accuracy at low level after commissioning.

Source
“100% of the pesticides had analysis accuracy between 80% and 120% at 10 ppb in durian”
Maintenance

The transfer line, ion source and quadrupole are held at 280 °C, 280 °C and 150 °C respectively, so these temperatures must be verified during service and tuning.

Gives the setpoints to check during maintenance and troubleshooting of the MS interface.

Source
“Transfer Line Temperature 280 °C”