Shimadzu UH XFX Series
Shimadzu ·Fabriqué en Japan · En production active

Shimadzu UH XFX Series

Shimadzu UH XFX Series — Machines d'essai.

The UH XFX Series is a 4 kN (4000 N) capacity testing machine with 6 stages, designed for single, cycle, stress, strain, and stroke 3-stage switching control. It serves as a versatile platform for material testing applications requiring precise force application and multi-stage control.

Télécharger la fiche (PDF)

Spécifications complètes

Prestaciones y funciones principales
Force d'essai max. Rangeless (all models)
Ram stroke mfr 200 mm (UH-200kNX / UH-300kNX / UH-F300kNX)
Ram stroke mfr 250 mm (UH-500kNX / UH-F500kNX / UH-600kNX)
Ram stroke mfr 300 mm (UH-1000kNX / UH-F1000kNX / UH-2000kNX / UH-F2000kNX)
Ram stroke mfr 350 mm (UH-3000kNX / UH-F3000kNX)
Crosshead elevation speed (50/60 Hz) mfr 315/380 mm/min (UH-200kNX / UH-300kNX / UH-F300kNX)
Crosshead elevation speed (50/60 Hz) mfr 375/450 mm/min (UH-500kNX / UH-F500kNX)
Column span mfr 500 mm (UH-200kNX / UH-300kNX / UH-F300kNX)
Column span mfr 650 mm (UH-500kNX / UH-F500kNX / UH-600kNX)
Effective table dimensions (W × D) mfr 500 × 500 mm (UH-200kNX / UH-300kNX / UH-F300kNX)
Effective table dimensions (W × D) mfr 650 × 650 mm (UH-500kNX / UH-F500kNX / UH-600kNX)
Eléctrico, alimentación y accionamiento
Moteur d'entraînement 1.5 kW (UH-200kNX / UH-300kNX / UH-F300kNX / UH-500kNX / UH-F500kNX (ser)
UH-200kNXh / UH-300kNXh / UH-F300kNXh / UH-500kNXh / UH-F500kNXh: 2.0 kW · UH-600kNX / UH-1000kNX / UH-F1000kNX (servo valve): 2.2 kW · UH-2000kNX / UH-F2000kNX / UH-3000kNX / UH-F3000kNX (servo valve: 5.5 kW · UH-3000kNX / UH-F3000kNX (servo valve): 7.5 kW
Power supply capacity (Approx.) mfr 4 kVA (UH-200kNX / UH-300kNX (servo valve); 200 V, 50 Hz / 200 to 2)
Power supply capacity (Approx.) mfr 6.5 kVA (UH-200kNXh / UH-300kNXh (hybrid); 200 V, 50 Hz / 200 to 220)

Description

Construction and Positioning

Integration & Operating Notes

Mounting
Ensure stable mounting for accurate test results

The machine should be mounted on a rigid, level surface to prevent vibration and misalignment during testing. Proper anchoring is recommended to maintain test integrity, especially at maximum force.

General engineering practice for testing machines
Electrical
Verify power supply compatibility before installation

Check the required voltage and current ratings from the nameplate or manual. Use a dedicated circuit to avoid interference from other equipment, and ensure proper grounding for safety and measurement accuracy.

Instruction Manual, Electrical Specifications
Control & I/O
Configure control parameters for specific test modes

The machine offers single, cycle, stress, strain, and stroke 3-stage switching. Set the appropriate control mode and parameters via the controller before starting tests to match the material and test standard.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the UH XFX Series over other models in the Shimadzu UH series?

Choose the UH XFX Series when your testing requires up to 4 kN force and multi-stage control (single, cycle, stress, strain, stroke). For higher forces or different control features, consider other UH models.

What are the requirements for integrating this machine with a data acquisition system?

The machine provides analog or digital outputs for force and displacement. Ensure your DAQ system matches the signal type and range. Refer to the manual for connector types and signal specifications.

What environmental conditions are recommended for operating this testing machine?

Operate in a clean, dry environment with stable temperature and humidity to prevent corrosion and ensure measurement accuracy. Avoid direct sunlight and vibration sources.

What maintenance tasks and accessories are required for the UH XFX Series?

Regularly inspect and clean grips and fixtures. Calibrate the load cell annually. Accessories like grips and extensometers are not included and must be ordered separately based on test needs.

Plans dimensionnels et documentation technique

Dessins dimensionnels

performance curve

Click drawing to inspect vector dimensions

Documentation technique

PDF
c221-e010
Datasheet ·5,1 МБ ·20 pp.
Voir le PDF