Agilent Technologies PAL3 autosampler, automated solid phase extraction
Agilent Technologies ·Fabriqué en USA · En production active

Agilent Technologies PAL3 autosampler, automated solid phase extraction

Agilent Technologies PAL3 autosampler, automated solid phase extraction — Chromatographie en phase gazeuse.

Le passeur d'échantillons PAL3 est un front-end robotisé pour GC et GC/MS qui automatise l'extraction en phase solide et la préparation d'échantillons SPME. Il se distingue au sein de la série par sa configuration RTC (changement d'outil robotisé), qui permet des flux de travail SPE et SPME automatisés. Il constitue l'étape d'introduction et de préparation des échantillons pour l'analyse de traces, notamment les pesticides dans le durian et les aldéhydes dans la bière.

Agilent Technologies GC Sample Preparation Introduction Series — Model Comparison & Selection

Modèle Sample volume, milliliterAnalysis time, minBake flow, mL/minBake temperature, °CBake time, minCalibration concentration, µg/ml
PAL3 autosampler, automated solid phase extraction Actuel ——————
GC autosampler, GC sample injection 0.00180———100
purge and trap, volatile organic compounds analysis ——2002802—
Reliable, consistent GC introduction of liquefied gases ——————

Spécifications complètes

Prestaciones y funciones principales
Gaz vecteur Helium
Débit de gaz vecteur 1.2 mL/min
Number of target pesticides mfr 197
Analytical system mfr 3 GC/MSD
Sample matrix mfr 1 ratio
Recovery criterion mfr 70...120
Precision criterion (RSD) mfr 20
Quantification limit range mfr 3...100 ppb
MRM database size mfr 1100 compounds
MRMs per compound mfr 10
Flavor threshold, hexanal mfr 350 μg/L
Flavor threshold, furfural mfr 15.157 mg/L
Flavor threshold, phenylacetaldehyde mfr 105 μg/L
Flavor threshold, trans-2-nonenal mfr 0.1 μg/L
Calibration range, hexanal mfr 0.05...10 μg/L
Calibration range, furfural mfr 5...1,000 μg/L
Calibration range, phenylacetaldehyde mfr 0.1...50 μg/L
Calibration range, trans-2-nonenal mfr 0.025...5 μg/L
Coefficient of determination R2, hexanal mfr 0.999
Coefficient of determination R2, furfural mfr 0.998
Coefficient of determination R2, phenylacetaldehyde mfr 0.996
Coefficient of determination R2, trans-2-nonenal mfr 0.998
Repeatability %RSD (n = 3), hexanal in beer mfr 1.3...4.9
Repeatability %RSD (n = 3), furfural in beer mfr 1.3...2.8
Repeatability %RSD (n = 3), phenylacetaldehyde in beer mfr 0.9...3.7
Repeatability %RSD (n = 3), trans-2-nonenal in beer mfr 1.7...2.8
Method detection limit, hexanal mfr 0.0009 μg/L
Method detection limit, furfural mfr 0.52 μg/L
Method detection limit, phenylacetaldehyde mfr 0.015 μg/L
Method detection limit, trans-2-nonenal mfr 0.003 μg/L
Inlet liner mfr 5190 Ultra
Ion source drawout lens diameter mfr 9 mm
Autotune algorithm mfr etune etune
Software version mfr 10.1
Calibration range mfr 0.01...0.5 μg/mL
LLOQ mfr 0.02 μg/mL
Number of analytes tested mfr 100
Normas, seguridad y datos generales
Internal standard mfr Chlorpyrifos-
Ion source drawout lens part number mfr 3870

Description

Construction et positionnement

Comportement et performances analytiques

Installation et fonctionnement

Integration & Operating Notes

Selection & Integration Q&A

Plans dimensionnels et documentation technique

Dessins dimensionnels

performance curve

Click drawing to inspect vector dimensions

Documentation technique