Shimadzu Axima Confidence
Shimadzu ·Fabriqué en Japan · En production active

Shimadzu Axima Confidence

Shimadzu Axima Confidence — Mass spectrometers.

L'Axima Confidence est un spectromètre de masse MALDI à temps de vol équipé d'un laser à azote à focalisation fixe de 337 nm (impulsion de 3 ns, 100 µJ, 50 Hz) et d'une irradiation quasi normale sur l'axe. Il couvre le mode linéaire de 1 Da à 500 kDa et le mode réflectron avec une résolution >15,000 FWHM, en utilisant des cibles à microtitration 96/384 puits ou au format lame FlexiMass. Il constitue une bête de somme de paillasse pour l'analyse de masse de routine des protéines et des peptides dans les laboratoires des sciences de la vie.

Télécharger la fiche (PDF)

Remplacements directs (drop-in)

⚖️ Comparer
0%
match
⚖️ Comparer
0%
match
⚖️ Comparer
⚖️ Comparer

Spécifications complètes

Prestaciones y funciones principales
Laser repetition rate (N2 laser) mfr 50 Hz (N2 laser)
Laser type mfr N2
Resolution (ACTH fragment 7-38) mfr >15,000 FWHM (ACTH fragment 7-38)
Ion source (near-normal (on-axis) laser irradiation) mfr MALDI (near-normal (on-axis) laser irradiation)
Sample target format (FlexiMass microscope slide-format) mfr plain or 48 well (FlexiMass microscope slide-format)
Sensitivity (linear mode, bovine serum albumin) mfr 250 fmol (linear mode, bovine serum albumin)
Target thickness (plain, 96 and 384 sample targets) mfr 2 mm (plain, 96 and 384 sample targets)
Maximum target thickness (with optional adaptor) mfr 10 mm (with optional adaptor)
Turbomolecular pump pumping speed (nominal, sample introduction, rotary backing) mfr 250 l/s (nominal, sample introduction, rotary backing)
Turbomolecular pump pumping speed (nominal, analyzer, two pumps with rotary backing) mfr 250 l/s (nominal, analyzer, two pumps with rotary backing)
Camera magnification (monochrome CCD camera) mfr 25 x (monochrome CCD camera)
Laser wavelength (nitrogen laser, fixed focus) mfr 337 nm (nitrogen laser, fixed focus)
Laser energy (nominal, per laser shot) mfr 100 μJ (nominal, per laser shot)
Maximum laser pulse rate (50 laser shots per second) mfr 50 Hz (50 laser shots per second)
Transient recorder sampling rate (8 bit, 16 bit accumulator) mfr 2 GHz (8 bit, 16 bit accumulator)
Second transient recorder sampling rate (neutral detection, 8 bit, 64 kB RAM) mfr 125 MHz (neutral detection, 8 bit, 64 kB RAM)
RAM (control PC) mfr 16 GB (control PC)
HDD storage (control PC) mfr 256 GB (control PC)
SSD storage (control PC) mfr 1 TB (control PC)
Monitor size (control PC) mfr 24 in (control PC)
Operating system (control PC and LAUNCHPADTM) mfr Microsoft® Windows® 10 64-bit (control PC and LAUNCHPADTM)
Dimensiones, peso y diseño mecánico
Mass range (linear mode, bovine serum albumin) mfr 55000-80000 m/z (linear mode, bovine serum albumin)
Detector types (optional removal of unwanted low mass ions) mfr patented beam blanker (optional removal of unwanted low mass ions)
Mass range (linear mode) mfr 1 Da to 500 kDa (linear mode)
Mass accuracy (linear mode, with internal calibration) mfr <30 ppm (linear mode, with internal calibration)
XY stage step (microtiter plate footprint MALDI target) mfr 10 μm (microtiter plate footprint MALDI target)
XY stage repeatability (microtiter plate footprint MALDI target) mfr 10 μm (microtiter plate footprint MALDI target)
Laser pulse width mfr 3 ns
Linear flight tube drift length (linear mode) mfr 1.2 m (linear mode)
Reflectron effective drift length (reflectron mode) mfr 2.0 m (reflectron mode)
Eléctrico, alimentación y accionamiento
Ion extraction energy (linear mode, variable, software controlled) mfr +25 kV/-20 kV kV (linear mode, variable, software controlled)
Ion extraction energy (reflectron mode, variable, software controlled) mfr +20 kV/-20 kV kV (reflectron mode, variable, software controlled)
Normas, seguridad y datos generales
Sample target format (standard microtitre plate-format) mfr 96 or 384 well (standard microtitre plate-format)

Description

Construction et positionnement

Comportement en charge et dans les différents modes

Installation, contrôle et fonctionnement

Integration & Operating Notes

Mounting
Target thickness above 2 mm needs the optional adaptor

Standard 96- and 384-well microtitre-format targets are 2 mm thick; the sample introduction stage accepts only this thickness unless the optional adaptor is fitted, which raises the maximum to 10 mm. Loading an unadapted thick target risks jamming the vacuum lock and misaligning the laser focus.

Technical data leaflet MO302; document digest mo305
Process Limits
Linear-mode mass accuracy depends on internal calibration

The <30 ppm figure applies only with internal calibration in linear mode; without calibrant peaks in the same spectrum, mass accuracy will be worse. Include a calibrant spot or standard in the target layout for every batch where accurate masses are required.

Technical data leaflet MO302
Maintenance
Vacuum pumps require rotary backing and periodic service

The sample-introduction and analyzer turbomolecular pumps (250 l/s nominal) rely on rotary backing pumps; loss of backing vacuum or overdue pump service will degrade sensitivity and can trip the system. Schedule rotary-pump oil checks and turbopump service per the manual.

Technical data leaflet MO302
Cooling & Media
Nitrogen laser consumes N2 gas and has a finite shot life

The fixed-focus 337 nm nitrogen laser operates at 50 Hz with 3 ns pulses and 100 µJ nominal energy; it requires a nitrogen supply and its gas fill has a limited lifetime, so plan laser service into long-term operating budgets.

Technical data leaflet MO302

Selection & Integration Q&A

Quand dois-je choisir l'Axima Confidence plutôt qu'une autre variante de la série ?

Aucune variante sœur n'est définie dans les faits fournis, l'Axima Confidence est donc le seul modèle configuré ici. Choisissez-le lorsque vous avez besoin à la fois du mode linéaire jusqu'à 500 kDa et d'une résolution en mode réflectron >15,000 FWHM avec un laser N2 fixe à 337 nm à 50 Hz.

Quels formats et épaisseurs de cible sont compatibles avec le système d'introduction d'échantillon ?

Les cibles standard au format microplaque 96 ou 384 puits (2 mm d'épaisseur) et les cibles au format lame de microscope FlexiMass (simples ou 48 puits) s'adaptent directement ; l'adaptateur en option porte l'épaisseur maximale de cible à 10 mm pour des configurations non conventionnelles.

Quels entretiens et consommables sont nécessaires au-delà de la livraison de base ?

Le laser à azote nécessite une alimentation en azote gazeux et un entretien périodique du laser en raison de la durée de vie finie du remplissage gazeux ; les pompes à palettes rotatives nécessitent des contrôles d'huile et les turbopompes un entretien périodique. Les cibles et l'adaptateur pour cibles épaisses en option sont commandés séparément, et aucun câble ni accessoire n'est indiqué comme inclus.

Plans dimensionnels et documentation technique

Documentation technique

PDF
mo305
Datasheet ·906,6 КБ ·4 pp.
Voir le PDF
PDF
MO302
Datasheet ·455,8 КБ ·2 pp.
Voir le PDF