No photo available yet
Agilent Technologies Helium Mass Spectrometer Leak Detectors
Agilent Technologies Helium Mass Spectrometer Leak Detectors — Vacuum technologies.
The Agilent helium mass spectrometer leak detector is a vacuum instrument for locating and quantifying helium leaks in sealed systems and process chambers. It is positioned within the Helium Leak Detectors series alongside the C15 component leak detector and compact/battery-powered sniffer units. Its primary purpose is integral leak testing of components, vacuum vessels and roll-to-roll deposition equipment where helium tracer gas is used.
Full specifications
| Diffusion Pump Pumping Speed | 50000 L/s |
| Thickness | 6...100 µm |
| Substrate thickness (rolled foil, Al) mfr | 6...100 μm |
| Substrate thickness (electrolytic foil, Cu/Al) mfr | 5...140 μm |
| Substrate thickness mfr | 50 μm |
| green energy consumption mfr | 4 GWh |
| CO2 avoided mfr | 1350 Tons |
| solar energy generation mfr | 634 MWh |
| CO2 saved mfr | 214 tons |
| airfreight CO2 emission mfr | 600 kilometer |
| water saving mfr | 250 year |
| wastewater reduction mfr | 41 |
| energy reduction mfr | 35 MWh |
| CO2 emission reduction mfr | 20 |
| unwind zone pressure mfr | 10...1 mbar |
| turbomolecular pump pumping speed mfr | 70...2,000 L/s |
| bulk metal foil thickness mfr | 4...10 μm |
| replacement film thickness mfr | 1 μm |
| automotive energy density requirement mfr | 400 Wh/kg |
| energy density increase mfr | 20 |
| Maximim Width | 650 mm |
| Maximum Web Width (deposited Layer) | 1660 mm |
| Maximum Web Width (electrolytic Foil, Cu/al) | 1300 mm |
| Maximum Web Width (rolled Foil, Al) | 650 mm |
| anode/cathode collector weight reduction mfr | 50...60 |
| startup current mfr | 10 A |
| battery weight reduction mfr | 15 |
| Coating thickness (deposited layer) mfr | 50 μm |
| cooling liquid reduction mfr | 20...40 percent |
Description
Construction and series positioning
- This model is the general-purpose helium mass spectrometer leak detector in the Agilent Helium Leak Detectors series.
- Sibling models cover different integration roles: the C15 Component Leak Detector is dedicated to component leak detection integration, while the Sniffer Leak Detectors are compact and battery powered for mobile sniffing.
- No electrical, vacuum-pumping or interface specifications for this exact model are present in the verified facts; only web-width and substrate-thickness figures from the roll-to-roll deposition document are available, and these describe the deposition process rather than the leak detector itself.
Behavior and media
- The verified facts contain no curve points, no pumping-speed data and no sensitivity or response-time figures for this model, so no performance envelope can be stated.
- The attached technical overview discusses roll-to-roll metal deposition for lithium-ion battery production and the role of vacuum and leak detection in that process; it does not provide model-specific operating data.
Installation, control and operation
- The document digests contain no installation, connection, control or operating instructions for this model.
- The corporate sustainability brochure covers Agilent Vacuum Products Division sites and service options but lists no product models, sizes or ordering codes.
- Consequently, mounting, electrical supply, I/O and maintenance specifics cannot be derived from the supplied facts and must be taken from the model's own instruction manual.
Selection & Integration Q&A
The verified facts give no distinguishing performance data for this model, so selection cannot be made on sensitivity or pumping speed from this card. The C15 is described as a component leak detector for leak detection integration, and the sniffer units as compact and battery powered; choose this model only after confirming its own specifications in the manual against the required test method.
No inlet flange, backing-pump or interface data is present in the verified facts. The roll-to-roll deposition overview discusses vacuum and leak detection in web coating but gives no detector connection details. Obtain flange size, backing-pump requirements and electrical supply from the model instruction manual before specifying mating hardware.
The supplied documents contain no mounting, ambient-temperature or duty-cycle limits for this model. The sustainability brochure and the roll-to-roll overview do not address installation environment. These limits must be read from the model's instruction manual; do not infer them from the web-width figures in the deposition document.
The verified facts list no maintenance intervals, consumables or included accessories for this model. The green solutions brochure mentions division-level service options only. Confirm the delivery scope, spare parts and service intervals with the model-specific manual and the order documentation before commissioning.