No photo available yet
Agilent Technologies HPLC Instruments, UHPLC Systems,
Agilent Technologies HPLC Instruments, UHPLC Systems, — Liquid chromatography.
The Agilent InfinityLab Bio LC is a bio-inert liquid chromatography system configured for biopharmaceutical analysis, with a 4.6 mm column inner diameter and 1 mL/min typical flow. It achieves 9 ppm carryover and supports up to 6144 samples, distinguishing it from analytical-scale siblings by its biocompatible flow path. It serves as the separation engine in SEC, LC-MS, and 2D-LC workflows.
Agilent Technologies Liquid Chromatography Series — Model Comparison & Selection
| Model | Carryover, % | Column inner diameter, mm | Filter membrane diameter, mm | Filter membrane pore size, µm | Filter pore size, µm | Ptfe frits per pm kit, pk |
|---|---|---|---|---|---|---|
| HPLC Instruments, UHPLC Systems, Current | 9×10⁻⁴ | 4.6 | — | — | — | — |
| HPLC/UHPLC Upgrades – Upgrade an existing HPLC system | — | — | 47 | 0.2 | 2 | 5 |
Full specifications
| Carryover | 9 ppm |
| Sample Capacity | 6144 samples |
| Typical Flow Rate | 1 mL/min |
| Productivity range mfr | Micrograms Micrograms |
| Column Inner Diameter | 4.6 mm |
Description
Construction and series positioning
- The Bio LC is a bio-inert variant within the InfinityLab LC series, using biocompatible materials for the flow path to prevent interaction with biomolecules.
- It is distinct from the preparative LC systems (1290/1260 Infinity II Preparative) and analytical-scale purification systems, which are optimized for higher sample loads and fraction collection.
- Sibling models include HPLC/UHPLC upgrades for existing systems; the Bio LC is a complete system rather than an upgrade kit.
Behavior under load and media
- The system operates at a typical flow rate of 1 mL/min with a 4.6 mm column inner diameter, suitable for analytical-scale separations.
- Carryover is specified at 9 ppm, which is critical for trace analysis in biopharmaceutical workflows.
- Sample capacity of 6144 samples supports high-throughput operation, though the productivity range is expressed in micrograms, indicating microgram-level sample loading.
Installation, control, and operation
- The brochure covers multiple workflow solutions including Bio 2D-LC, online LC, LC-MS, and SEC, but does not provide specific installation or control details.
- No actionable engineering facts were extracted from the attached documents; refer to the respective system manuals for connection and control specifics.
Integration & Operating Notes
The specified carryover of 9 ppm is a system-level performance limit; exceeding it can compromise results in sensitive biopharmaceutical assays. Ensure method conditions and needle wash protocols are optimized to maintain this level, especially when switching between samples of varying concentrations.
To maintain the specified carryover performance, implement a routine maintenance schedule for the injection system, including needle and seat cleaning, and replacement of consumables such as seals and tubing as recommended by the manufacturer. Neglecting maintenance can lead to increased carryover and reduced data quality.
Selection & Integration Q&A
Choose the Bio LC for analytical-scale biopharmaceutical separations requiring bio-inert flow path and low carryover (9 ppm). Preparative LC systems are for higher sample loads and fraction collection, while upgrades enhance existing HPLC systems without full bio-inert capability.
The Bio LC is compatible with LC-MS workflows as described in the brochure, but specific interface requirements (e.g., flow splitting, tubing) depend on the detector. Ensure the detector's flow cell and connections are bio-inert and can handle the typical 1 mL/min flow without excessive backpressure.
The provided documents do not specify environmental limits or duty-cycle constraints. Consult the system manual for operating temperature, humidity, and maximum continuous operation guidelines to ensure reliable performance and longevity.
The base system does not include consumables such as columns, tubing, needle wash solvents, or sample vials. A maintenance kit with seals, frits, and filters is recommended for scheduled service. Refer to the brochure for available accessories like column organizers and detectors.