No photo available yet

Agilent Technologies ·Made in USA · In Active Production

Agilent Technologies Rotary Motion Feedthroughs for UHV

Agilent Technologies Rotary Motion Feedthroughs for UHV — Vacuum technologies.

Rotary motion feedthrough for UHV service, part of Agilent's Feedthroughs series. The supplied fact set contains no mechanical, electrical, or vacuum-rating data for this model, so no torque, speed, flange, or leak-rate figures can be stated. It is intended to transmit rotary actuation through a vacuum chamber wall; sizing must be confirmed against the actual product datasheet.

Full specifications

Core Performance & Functional Specifications
Electron Charge 1.602 coulomb
Molar Volume 22.41 liters
Acceleration due to gravity mfr 9.8066
Angstrom unit mfr 10 m
Avogadro's number mfr 6.02214076
Boltzmann's constant mfr 1.38064852
Equivalent of heat mfr 4.185
Natural log base mfr 2.7183
Velocity of light mfr 2.9979
Velocity of sound mfr 343
Magnetic flux density mfr 1
Pressure conversion mfr 1 Torr
Pumping speed conversion mfr 1 L/s
Throughput conversion mfr 1 cc/sec
Outgassing rate mfr 2
Dimensions, Weight & Mechanical Design
Atomic Mass Unit 1.6605 grams
Standards, Safety & General Data
Standard pressure mfr 101325 Pa

Description

Construction and positioning

Behavior and ratings

Installation and operation

Integration & Operating Notes

Process Limits
Do not size torque or speed from this card

The verified fact set contains no torque, rotational-speed, bakeout-temperature, or leak-rate values for this feedthrough. Selecting a drive motor or specifying operating limits without the product datasheet risks overloading the shaft seal or exceeding the vacuum rating.

Verified fact set (no feedthrough specification rows present
Mounting
Flange and shaft interface not documented here

The supplied Agilent documents are a portfolio leaflet and a formulas/tables booklet; neither lists flange standard, shaft diameter, or mounting orientation for this model. Confirm the chamber port and coupling dimensions against the product-specific drawing before ordering.

Agilent brochure 5994 8433EN; Agilent reference booklet 5994 5366EN
Maintenance
Service interval and spare parts not in supplied documents

No lubrication schedule, seal replacement interval, or spare-parts list for this feedthrough appears in the attached documents. Obtain the model manual for maintenance intervals and consumable part numbers before commissioning.

Agilent brochure 5994 8433EN (no feedthrough service content

Selection & Integration Q&A

When should this rotary feedthrough be chosen over other feedthrough variants in the series?

The supplied facts list no sibling models and no variant data (shaft type, flange, drive), so a comparison cannot be made from this record. Select against the full Agilent feedthrough catalog and the chamber port standard; this card cannot distinguish it from neighbors.

What must be verified about the chamber port and drive coupling before integrating this feedthrough?

Flange standard, shaft diameter, and coupling type are not stated in the supplied documents. Confirm them on the product drawing, then match the external drive's torque and speed to the feedthrough rating from the datasheet, since neither value is in this fact set.

Are mounting orientation and bakeout limits defined for this model in the supplied documentation?

No. The attached documents are a portfolio leaflet and a formulas/tables booklet; neither gives mounting orientation, bakeout temperature, or duty-cycle limits for this feedthrough. These must come from the model manual before installation.

What maintenance schedule and accessories apply, and what is not included in base delivery?

The supplied documents contain no maintenance interval, lubrication specification, or accessory list for this feedthrough. Cables, drive couplings, and spare seals cannot be confirmed as included or excluded; check the model manual and order code.

Dimensional Drawings & Technical Documentation

Technical documentation