No photo available yet

Agilent Technologies ·Made in USA · In Active Production

Agilent Technologies 4000 m3/h Rotary Piston (Roots) Pump; RP-4001 Roots Pump

Agilent Technologies 4000 m3/h Rotary Piston (Roots) Pump; RP-4001 Roots Pump — Vacuum technologies.

The RP-4001 is a 4000 m³/h rotary piston (Roots) vacuum pump, the largest capacity model in the RP series. It is intended for high-throughput roughing and backing duty in large vacuum systems, where its displacement exceeds that of the 1000, 1400, 500 and 250 m³/h siblings. No electrical, pressure or connection data for this model is present in the verified facts.

Full specifications

Core Performance & Functional Specifications
Diffusion Pump Pumping Speed 50 L/s
Vacuum gauge measurement range mfr 6 pressure
Dry scroll pump typical size mfr 3...30 h
Turbomolecular pump pumping speed mfr 70...3 L/s
Interfaces, Connections & Control
Turbomolecular pump controller protection class mfr 54

Description

Construction and series positioning

Behavior and operating data

Installation, control and operation

Integration & Operating Notes

Process Limits
Do not use the 50 L/s figure as this pump's speed

The only matched performance spec in the verified facts is a 50 L/s diffusion-pump pumping speed, which belongs to a different pump type. Sizing the RP-4001 from that number would undersize the roughing line by orders of magnitude; use the model-specific datasheet for the 4000 m³/h displacement and its pressure dependence.

Factory Specification Sheet (matched specs
Process Limits
Series capacity step is the only verified selection basis

Verified facts give only nominal displacements for the RP family: 250, 500, 1000, 1400 and 4000 m³/h. Selection between the RP-4001 and its siblings can therefore be based only on required throughput; pressure, ultimate vacuum and power data for each size must be taken from the respective datasheets.

Factory Specification Sheet (sibling models

Selection & Integration Q&A

When should I choose the RP-4001 instead of the RP-1001 or RP-1401?

Choose the RP-4001 when the required roughing throughput approaches 4000 m³/h; the RP-1001 and RP-1401 cover 1000 and 1400 m³/h respectively. Verified facts give only nominal displacements, so pressure-dependent performance and motor data must be compared from each model's datasheet before final selection.

What electrical supply and control interface does the RP-4001 require?

The verified facts contain no electrical or control data for the RP-4001; voltage, current, motor rating and control I/O are not stated. These must be taken from the model-specific instruction manual or datasheet, not inferred from the series or from the e-mobility brochures.

What mounting and environmental limits apply to the RP-4001?

No mounting orientation, ambient temperature, cooling-water or duty-cycle limits for the RP-4001 appear in the supplied documents. The brochures are application-level and the spec sheet lists no environment data, so installation limits must be confirmed from the model-specific manual before site planning.

What maintenance items and accessories are needed, and are they included?

The verified facts list no maintenance intervals, consumables, cables or accessories for the RP-4001, and the brochures contain no ordering codes or part numbers. Base delivery content and required service items are therefore unknown from these documents and must be confirmed against the model-specific manual and price list.

Dimensional Drawings & Technical Documentation

Technical documentation