Agilent Technologies AA Spray Chamber & Components | AAS Atomization Chamber
Agilent Technologies AA Spray Chamber & Components | AAS Atomization Chamber — Atomic spectroscopy.
The Agilent spray chamber for atomic absorption is a replacement component for Mark 7 burner/spray chamber assemblies used in Agilent 55/240/280 flame AAS systems. It is supplied as part of a consumable and spare-parts portfolio that also covers hollow cathode lamps, sample-introduction parts, VGA 77 vapor-generation accessories, and SPS 4 autosampler items. Its primary purpose is to complete the sample-introduction path in flame AA, where aerosol conditioning and transport to the burner are required.
Full specifications
| Burner Cleaning And Alignment Card Pack Size | 100 pk |
| Capillary Tubing Pack Size | 3 pk |
| Glass Impact Beads Pack Size | 5 pk |
| Sample Vial Volume | 1.1 mL |
| Syringe Volume | 100 µL |
| Hydride absorption cells quantity mfr | 2 |
| Flowthrough mercury absorption cell quantity mfr | 1 |
| AA hydride module quantity mfr | 1 |
| PVC peristaltic pump tubing quantity mfr | 1 each |
| Sample rack capacity mfr | 16 od |
| Rack overlay positions mfr | 60 positions |
| Standards rack positions mfr | 34 positions |
| Capillary tubing inner diameter mfr | 0.38 ID |
| SPS 4 probe inner diameter mfr | 1.0 id |
Description
Construction and series positioning
- This model code identifies a spray chamber for atomic absorption, not a complete spectrometer; it belongs to the Agilent aa-duo series and is listed alongside 240FS AA, 240Z AA, 280FS AA, and 280Z AA sibling models.
- The sibling list distinguishes flame (FS) and graphite-furnace (Z) AA instruments; the spray chamber is a flame-AA sample-introduction component and is not a graphite-furnace part.
- The attached flyer covers consumable supplies for Agilent Flame AAS (55/240/280 AAS) and Graphite Furnace AAS systems, including Mark 7 burner/spray chamber items, so this spray chamber is positioned within that Mark 7 flame-AA accessory family.
Behavior and media
- No digitized curve points, performance ranges, or measurement conditions were supplied for this model, so no aerosol-transport, pressure-drop, or detection-limit behavior can be stated.
- The verified facts include only pack-size and accessory quantities (for example, 100 pk burner-cleaning-and-alignment cards, 3 pk capillary tubing, 5 pk glass impact beads, 1.1 mL sample vials, 100 µL syringe), which describe the surrounding consumable kit rather than the spray chamber's own operating envelope.
Installation, connection, and control
- The document digest contains no sections or actionable engineering facts, so installation torque, gas-flow settings, and alignment procedures for this spray chamber cannot be extracted from the supplied material.
- The flyer scope confirms that Mark 7 burner/spray chamber items are part of the recommended spare-parts set for flame AAS, but no connection or control details are given.
Integration & Operating Notes
The attached flyer lists Mark 7 burner/spray chamber items among recommended consumable supplies and spare parts for Agilent Flame AAS (55/240/280 AAS). Engineers should treat the spray chamber as a replaceable sample-introduction component and verify the exact Mark 7 assembly variant before ordering, because the digest does not specify interchangeability across the 55, 240, and 280 flame systems.
The document digest contains no sections or actionable engineering facts, so maximum gas pressure, sample flow, acid concentration, or temperature limits for this spray chamber are not available. Any integration must rely on the instrument's own Mark 7 burner/spray chamber manual rather than this card, and no numeric limit should be assumed from the pack-size specifications.
Selection & Integration Q&A
This item is a flame-AA spray chamber component, not a spectrometer. Choose it when maintaining a Mark 7 burner/spray chamber assembly on an Agilent 55/240/280 flame AAS. The 240Z AA and 280Z AA siblings are graphite-furnace instruments and do not use this flame spray chamber; the 240FS AA and 280FS AA are the flame siblings in the same series.
It belongs to the Mark 7 burner/spray chamber family for Agilent Flame AAS (55/240/280). The flyer also lists capillary tubing (0.38 mm ID), glass impact beads, and burner-cleaning-and-alignment cards as related consumables, so the mating burner, capillary, and impact beads should be confirmed as Mark 7-compatible before installation. No drive, power supply, or controller interface is specified for this passive component.
The supplied document digest contains no sections or actionable engineering facts, so mounting orientation, gas-pressure limits, and duty cycle for this spray chamber are not documented here. The only verified context is that it is a Mark 7 flame-AA spare part. Consult the instrument's Mark 7 burner/spray chamber manual for installation and operating limits before use.
The flyer positions Mark 7 burner/spray chamber items within a recommended spare-parts set that also includes hollow cathode lamps, sample-introduction parts, VGA 77 vapor-generation accessories, and SPS 4 autosampler accessories. Specific replacement intervals are not given in the digest. The base spray chamber delivery does not include the separately listed consumables such as 100 pk burner-cleaning cards, 3 pk capillary tubing, 5 pk glass impact beads, 1.1 mL vials, or the 100 µL syringe.