BINDER FD 23
BINDER ·Made in Germany · In Active Production

BINDER FD 23

BINDER FD 23 — Drying ovens with Temperature 5…300 °C.

The FD 23 is a 20 L forced-convection drying and heating chamber with a 5–300 °C working range, positioned as the smallest standard model in BINDER's FD series. Unlike the larger FD 56/115/260/720 siblings, it delivers 64 air changes per hour and 0.3 K fluctuation from a 0.8 kW single-phase supply, making it suited to small-batch drying, conditioning and heat-treatment tasks where bench space and power are limited.

Temperature
5…300 °C

BINDER FD Series — Model Comparison & Selection

Model Temperature, °CAir change rate, 1/hourDepth, mmHeating up time to 150 c, minHeight, cmInterior volume, L
FD 23 Current 5–300645202549.520
FD 115 10–300326051873.5116
FD 260 10–30098251994259
FD 56 10–300805651562.560
FD 720 12–300587025159741

Full specifications

Core Performance & Functional Specifications
Temperature 5...300 °C
Air change rate 64 x/h
Heating time to 150°C 25 min
Interior volume 20 L
Load per rack 12 kg (FD023-230V / FD023UL-120V)
Nominal power 0.8 kW
Permitted load 25 kg (FD023-230V / FD023UL-120V)
Temperature fluctuation 0.3 K
Temperature uniformity 2.5 K
Rear wall clearance 100 mm (FD023-230V / FD023UL-120V)
Side wall clearance 50 mm (FD023-230V / FD023UL-120V)
Article Number mfr 9010
Recovery time after door was opened for 30 s at 150°C mfr 6 min
Dimensions, Weight & Mechanical Design
Depth 520 mm (FD023-230V / FD023UL-120V)
Height 495 mm (FD023-230V / FD023UL-120V)
Interior height 330 mm (FD023-230V / FD023UL-120V)
Interior width 222 mm (FD023-230V / FD023UL-120V)
Width 435 mm (FD023-230V / FD023UL-120V)
Net weight of the unit (empty) mfr 27 kg
Electrical, Power & Drive Specifications
Power frequency 50 Hz
Rated voltage 230 V
Unit fuse 10.0 A
Phase (Nominal voltage) mfr 1

Description

Construction and series positioning

Thermal behaviour under load

Installation and operation

Integration & Operating Notes

Mounting
Rear clearance of 100 mm must be maintained for convection

The forced-convection fan draws and discharges air at the rear; blocking the 100 mm rear gap (and 50 mm sides) restricts airflow, degrades the 2.5 K uniformity and can overheat the casing. Plan bench depth and adjacent equipment accordingly.

Data Sheet Model FD 23 en.pdf, installation clearances
Electrical
Match the variant to site voltage before ordering

FD023-230V requires 230 V 1~ 50/60 Hz with CEE 7/7 plug and 10.0 A fusing; FD023UL-120V requires 120 V 1~ 60 Hz with NEMA 5-15. Connecting the wrong variant to site power will not achieve rated heating power and may damage the unit.

Data Sheet Model FD 23 en.pdf, scope and variants
Process Limits
Total load 25 kg, no more than 12 kg per rack

Exceeding the 25 kg total or 12 kg per-rack limit overloads the rack supports and alters airflow, compromising the 2.5 K uniformity specification. Distribute samples evenly and account for rack weight in the total.

Factory Specification Sheet, permitted load and load per rack
Process Limits
Door openings cost 6 min recovery at 150 °C

Each 30 s door opening at 150 °C requires about 6 min to recover setpoint. Frequent access for sample loading or inspection will reduce effective throughput and expose heat-sensitive loads to temperature excursions; batch access to minimise openings.

Factory Specification Sheet, recovery time
Maintenance
No maintenance schedule is documented in the supplied data

The provided data sheet contains no service intervals, error codes or consumable list. Maintenance planning must rely on the full instruction manual, which was not included in the supplied documents; do not assume a schedule from this card.

Data Sheet Model FD 23 en.pdf (no maintenance section supplied

Selection & Integration Q&A

When should I choose the FD 23 instead of the FD 56 or FD 115?

Pick the FD 23 for small batches within its 20 L interior and 25 kg load, where bench space and a 0.8 kW single-phase supply are constraints. Move to FD 56/115/260/720 when larger volume or a 10–12 °C lower limit is needed; the FD 23 alone reaches 5 °C.

What site power and plug does the FD 23 require, and can I use either variant?

The 230 V variant needs 230 V 1~ 50/60 Hz with CEE 7/7 plug and 10.0 A fusing; the UL variant needs 120 V 1~ 60 Hz with NEMA 5-15. They are not interchangeable — order the variant matching site voltage and receptacle.

What is included in base delivery and what must I supply for maintenance?

Base delivery covers the chamber with its standard plug; the supplied data lists no accessories, cables or consumables, and no maintenance schedule or error-code list is documented. Obtain the full instruction manual for service intervals and any replacement parts before commissioning.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Data Sheet Model FD 23 en
Datasheet ·400,7 КБ ·7 pp.
View PDF