Elmo Rietschle VPS
Elmo Rietschle ·Made in Germany · In Active Production

Elmo Rietschle VPS

Elmo Rietschle VPS — Central Industrial & Medical Vacuum Systems with Motor power 3 kW, Pumping speed 996 m³/h, Ultimate pressure 0.01 mbar.

The VPS 301.10 is a frame-mounted standard vacuum system combining a VSI 301 rotary screw backing pump with a VWP 1001 rotary lobe booster. It delivers 841 m³/h at 1 mbar (50 Hz) and reaches 0.01 mbar ultimate vacuum, distinguishing it from single-stage siblings by its two-stage architecture. It serves central industrial vacuum systems requiring high pumping speed in the fine vacuum range.

Motor power
3 kW
Pumping speed
996 m³/h
Ultimate pressure
0.01 mbar
Weight
741 kg

Full specifications

Core Performance & Functional Specifications
Motor power 34 W (W1)
50 Hz / 60 Hz, VA: 230 / 350 W · 50 Hz, IE4: 7.5 kW · 60 Hz: 9.0 kW · 50 Hz, IE3: 3.0 kW
Pumping speed 841 m³/hour (50 Hz)
60 Hz: 996 m³/hour
Ultimate pressure 0.01 mbar
Rotational speed 2945 rpm (50 Hz)
60 Hz: 3540 rpm
Suction capacity at 1 mbar (abs.) mfr 841 m3/h (50 Hz)
Suction capacity at 1 mbar (abs.) mfr 996 m3/h (60 Hz)
Ultimate vacuum at continuous operation mfr 0,01 mbar (abs.)
VSI 301 motor speed mfr 2945 min-1 (50 Hz)
VSI 301 motor speed mfr 3540 min-1 (60 Hz)
VSI 301 motor note mfr UL (US), CSA, CC-Nr., EAC
VWP 1001 motor speed mfr 2895 min-1 (50 Hz)
VWP 1001 motor note mfr IP 55
Dimensions A (vacuum connection) mfr 1566 mm
Dimensions H mfr 678 mm
Dimensions O mfr 1298 mm
Dimensions Z mfr 1476 mm
Dimensions (598) mfr 598 mm
Dimensions (471,5) mfr 471,5 mm
Dimensions (753) mfr 753 mm
Dimensions (65) mfr 65 mm
Dimensions (1267,3) mfr 1267,3 mm
Dimensions (921,5) mfr 921,5 mm
Dimensions (302) mfr 302 mm
Dimensions (180) mfr 180 mm
Dimensions (339) mfr 339 mm
Suction capacity at 1mbar (abs.) mfr 841 m3/h (50 Hz)
Suction capacity at 1mbar (abs.) mfr 996 m3/h (60 Hz)
Motor VSI 301 speed mfr 2945 min-1 (50 Hz)
Motor VSI 301 speed mfr 3540 min-1 (60 Hz)
Motor VSI 301 note mfr UL (US), CSA, CC-Nr., EAC
Motor VWP 1001 speed mfr 2895 min-1 (50 Hz)
Motor VWP 1001 note mfr IP 55
Speed (VWP 1001) (alt 50 Hz) mfr 2895 rpm (50 Hz)
Dimensions, Weight & Mechanical Design
Weight 741 kg
Height 1566 mm
Length 1476 mm
Width 678 mm
max. weight without motor mfr 741 kg
VSI 301 motor weight mfr 74 kg
VWP 1001 motor weight mfr 26 kg
Motor VSI 301 weight mfr 74 kg
Motor VWP 1001 weight mfr 26 kg
Motor weight (VSI 301) (alt var) mfr 74 kg
Motor weight (VWP 1001) (alt var) mfr 26 kg
Electrical, Power & Drive Specifications
Current 0.32 A (W1)
50 Hz / 60 Hz, VA: 1.10 / 1.55 A · 50 Hz: 14.1 / 8.15 A · 60 Hz: 14.3 A
Power supply 230 V ± 10 % (50 / 60 Hz), 1~ V (W1)
Voltage 400 / 690 V (50 Hz)
60 Hz: 460 V
Circulation pump (W1) rated voltage mfr 230 ±10% V (50/60 Hz)
Circulation pump (W1) power consumption mfr 34 W
Fan (VA) rated voltage mfr 230 ±10% V (50/60 Hz)
Fan (VA) power consumption mfr 230 W (50 Hz)
Fan (VA) power consumption mfr 350 W (60 Hz)
Circulation pump (W1) current consumption mfr 0,32 A
Fan (VA) current consumption mfr 1,10 A (50 Hz)
Fan (VA) current consumption mfr 1,55 A (60 Hz)
VSI 301 motor efficiency class mfr IE4
VSI 301 motor rated power mfr 7,5 kW (50 Hz)
VSI 301 motor voltage mfr 400/690 V ±10% (50 Hz)
VSI 301 motor current mfr 8,15 A (50 Hz)
VSI 301 motor rated power mfr 9,0 kW (60 Hz)
VSI 301 motor voltage mfr 460 V ±10% (60 Hz)
VSI 301 motor current mfr 14,3 A (60 Hz)
VWP 1001 motor efficiency class mfr IE3
VWP 1001 motor rated power mfr 3,0 kW (50 Hz)
VWP 1001 motor voltage mfr 230/400 V ±10% (50 Hz)
VWP 1001 motor current mfr 5,77 A (50 Hz)
Rated voltage circulation pump (W1) mfr 230 V ±10 % V (50/60 Hz)
Rated voltage fan (VA) mfr 230 V ±10 % V (50/60 Hz)
Power consumption circulation pump (W1) mfr 34 W
Power consumption fan (VA) mfr 230 W (50 Hz)
Power consumption fan (VA) mfr 350 W (60 Hz)
Current consumption circulation pump (W1) mfr 0,32 A
Current consumption fan (VA) mfr 1,10 A (50 Hz)
Current consumption fan (VA) mfr 1,55 A (60 Hz)
Motor VSI 301 efficiency class mfr IE4
Motor VSI 301 power mfr 7,5 kW (50 Hz)
Motor VSI 301 voltage mfr 400/690 V ±10 % (50 Hz)
Motor VSI 301 current mfr 14,1/8,15 A (50 Hz)
Motor VSI 301 power mfr 9,0 kW (60 Hz)
Motor VSI 301 voltage mfr 460/- V ±10 % (60 Hz)
Motor VSI 301 current mfr 14,3/- A (60 Hz)
Motor VWP 1001 efficiency class mfr IE3
Motor VWP 1001 power mfr 3,0 kW (50 Hz)
Motor VWP 1001 voltage mfr 230/400 V ±10 % (50 Hz)
Motor VWP 1001 current mfr 10/5,77 A (50 Hz)
Rated voltage (VWP 1001) (alt 50 Hz) mfr 230 / 400 V (50 Hz)
Current (VWP 1001) (alt 50 Hz) mfr 10 / 5,77 A (50 Hz)
Interfaces, Connections & Control
Inlet connection Ø180 / Ø220, 4xM16
Materials, Media & Process Compatibility
Oil capacity VSI 301 gearbox/bearing side (1) mfr 1,4 l
Oil capacity VSI 301 bearing side (2) mfr 0,6 l
Oil capacity VWP 1001 gearbox/bearing side (1) mfr 1,65 l
Oil capacity VWP 1001 bearing side (2) mfr 0,8 l
Oil capacity shaft (3) mfr 0,08 l
Oil capacity VWP 1001 shaft (3) mfr 0,08 l
Operating Conditions, Environment & Protection
Protection rating IP 55
Cooling type Water cooling system / Fan
Cooling water pressure (closed circuit) (VSI 301) min. mfr 0,6 bar
Cooling water pressure (closed circuit) (VSI 301) max. mfr 1,2 bar

Description

Construction and series positioning

The VPS 301.10 is a two-stage, frame-mounted vacuum system: a VSI 301 oil-flooded rotary screw pump (backing stage) and a VWP 1001 rotary lobe booster (high-vacuum stage) mounted on a common base. This combination is the standard configuration for the VPS series, where the booster provides high pumping speed at low pressures and the screw pump handles the exhaust. The VSI 301 motor is rated 7.5 kW at 50 Hz (IE4) and 9.0 kW at 60 Hz, with speeds of 2945 rpm and 3540 rpm respectively. The system weighs 741 kg without motor and measures 1566 mm high, 1476 mm long, and 678 mm wide. The inlet connection is Ø180/Ø220 with 4×M16 threads, accommodating standard ISO-K or DIN flanges via adapters.

Behavior under load and media

At 1 mbar (abs.), suction capacity is 841 m³/h at 50 Hz and 996 m³/h at 60 Hz. Ultimate vacuum is 0.01 mbar (abs.) in continuous operation. The booster (VWP 1001) requires oil capacities of 1.65 L (gearbox/bearing side 1) and 0.8 L (bearing side 2), plus 0.08 L for the shaft. The VSI 301 requires 1.4 L (gearbox/bearing side 1) and 0.6 L (bearing side 2). Cooling is provided by a water circuit (closed circuit, 0.6–1.2 bar for VSI 301) and a fan (VA variant: 230 V, 230 W at 50 Hz, 350 W at 60 Hz). The system is designed for continuous duty at ultimate pressure.

Installation, connection, and control

The system requires a 400/690 V (±10%) three-phase supply at 50 Hz or 460 V at 60 Hz for the main motor. Auxiliary supplies are 230 V ±10% for the circulation pump (W1: 34 W, 0.32 A) and fan (VA: 230 W/350 W). Protection rating is IP55. The motor is UL, CSA, CC-Nr., and EAC certified. The system must be mounted on a level, rigid foundation; the frame is not designed for suspended installation. Cooling water connections must be made with the specified pressure range; a strainer is recommended to prevent clogging. Electrical connections must be made by qualified personnel according to local codes; the motor must be protected by a suitable overload relay set to the rated current (8.15 A at 50 Hz, 14.3 A at 60 Hz).

Integration & Operating Notes

Mounting
Foundation must support 741 kg plus motor and dynamic loads

The system weight without motor is 741 kg. The VSI 301 motor adds 74 kg, bringing the total installed weight to 815 kg. The foundation must be level and capable of absorbing vibration; use anti-vibration mounts if necessary. Do not suspend the frame.

Technical Data Sheet — VPS 301 (EN), Section Mechanical Data
Electrical
Motor overload protection must be set to 8.15 A at 50 Hz

The VSI 301 motor draws 8.15 A at 400/690 V, 50 Hz, and 14.3 A at 460 V, 60 Hz. Set the overload relay to these values to prevent winding damage. Verify rotation direction before coupling the booster; incorrect rotation can cause immediate mechanical failure.

Technical Data Sheet — VPS 301 (EN), Section Electrical Data
Cooling & Media
Cooling water pressure must stay between 0.6 and 1.2 bar

The VSI 301 closed-circuit cooling water pressure must be maintained within 0.6–1.2 bar. Lower pressure risks overheating; higher pressure may damage seals. Install a pressure regulator and gauge in the supply line. Water quality should be neutral and free of suspended solids.

Technical Data Sheet — VPS 301 (EN), Section Cooling Water
Control & I/O
Booster must not start until backing pump reaches <10 mbar

The VWP 1001 booster must be interlocked to start only after the VSI 301 backing pump has evacuated the system to below 10 mbar (abs.). Starting the booster at higher pressure causes motor overload and rapid wear. Use a vacuum switch or pressure transmitter to enable the booster contactor.

Instruction Manual, Section 5.2 Startup Sequence
Maintenance
Oil changes required every 2000 hours or 6 months

Change VSI 301 oil (1.4 L + 0.6 L) and VWP 1001 oil (1.65 L + 0.8 L + 0.08 L) every 2000 operating hours or 6 months, whichever comes first. Use only Elmo Rietschle approved oil. Inspect cooling water strainer monthly and clean as needed.

Instruction Manual, Section 7.1 Maintenance Schedule

Selection & Integration Q&A

When should I choose the VPS 301.10 over a single-stage screw pump from the same series?

Choose the VPS 301.10 when you need high pumping speed (841 m³/h at 1 mbar) and ultimate vacuum of 0.01 mbar. A single-stage screw pump alone would have lower speed at fine vacuum; the booster stage is essential for processes requiring high throughput below 10 mbar.

What are the requirements for the electrical supply and motor protection for this system?

The main motor requires 400/690 V ±10% at 50 Hz or 460 V at 60 Hz, with overload protection set to 8.15 A (50 Hz) or 14.3 A (60 Hz). Auxiliary 230 V ±10% supplies are needed for the circulation pump (0.32 A) and fan (1.10 A at 50 Hz, 1.55 A at 60 Hz). Use a motor protection circuit breaker or overload relay.

What maintenance items and accessories are not included in the base delivery?

The base delivery excludes oil (1.4 L + 0.6 L for VSI 301; 1.65 L + 0.8 L + 0.08 L for VWP 1001), cooling water hoses, strainer, and electrical cables. A vacuum switch for booster interlock is also not included. Order these separately.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Technical Data Sheet — VPS 301 (EN)
Datasheet ·736,1 КБ ·4 pp.
View PDF
PDF
IR ER Booster Digital
Datasheet ·4,3 МБ ·5 pp.
View PDF