Eppendorf Centrifuge 5424 R - Microcentrifuge
Eppendorf ·Made in Germany · In Active Production

Eppendorf Centrifuge 5424 R - Microcentrifuge

Eppendorf Centrifuge 5424 R - Microcentrifuge — Centrifuges.

The Eppendorf Centrifuge 5424 R is a benchtop microcentrifuge with a 350 W motor driving a 100–15,000 rpm range and a maximum RCF of 21,130 g. It accepts four rotor types and reaches set speed in 15 s with 16 s deceleration. Its 29 × 48 × 26 cm footprint and 21 kg weight suit it to benchtop sample preparation in molecular biology workflows.

Full specifications

Core Performance & Functional Specifications
Acceleration Time 1) 15 s
Deceleration Time 1) 16 s
Dimensions (w × D × H) 29 x 48 x 26 cm
Max. Rcf 21130 g
Rotational speed 100...15000 rpm
Rotors available mfr 4
Dimensions, Weight & Mechanical Design
Height (with Open Lid) 51 cm
Product Weight 21 kg
Electrical, Power & Drive Specifications
Max. Power Consumption 350 W

Description

Construction and positioning

Performance behavior

Installation and operation

Integration & Operating Notes

Mounting
Allow 51 cm clear height above the bench for the open lid

The unit stands 26 cm high closed but reaches 51 cm with the lid open. Benches under shelves, wall cabinets, or fume-hood sashes must provide at least that clearance, otherwise the lid cannot be fully opened for rotor access and loading.

Factory Specification Sheet
Process Limits
Speed range starts at 100 rpm, not zero

The drive operates between 100 and 15,000 rpm. Protocols requiring very low-speed gentle mixing below 100 rpm cannot be set on this unit; the lowest usable setpoint is 100 rpm.

Factory Specification Sheet
Process Limits
Maximum RCF of 21,130 g depends on the installed rotor

The stated 21,130 g maximum applies to the rotor configuration that achieves it; with the other of the four supported rotor types the achievable RCF will differ. Confirm the rotor-specific g value before setting protocols that rely on the maximum.

Factory Specification Sheet
Maintenance
Use Pivot Grease (order 5810 350.050) for rotor pivot lubrication

A safety data sheet is supplied for Pivot Grease, a petrolatum-based lubricant, indicating it is the specified grease for pivot points. Keep the SDS on file and follow its handling guidance when servicing rotor pivots; the grease is a separate order item.

Centrifugation Certificate Material Safety Data Sheet MSDS Pivot Grease, version 9.0.0

Selection & Integration Q&A

When should I choose the 5424 R rather than another microcentrifuge in the Eppendorf range?

Choose it when you need up to 15,000 rpm and 21,130 g in a 29 × 48 × 26 cm benchtop footprint with four rotor options. No sibling models are defined in the supplied data, so compare rotor capacity and g-force against other series before deciding.

What rotor and tube compatibility must I confirm before ordering?

The unit supports four rotor types, and the 21,130 g maximum is rotor-dependent. Specify the rotor for your tube format at order time and verify the rotor-specific RCF, since the base unit alone does not define which tubes fit.

What bench clearance and environment does the unit need?

Allow 51 cm height with the lid open above a 29 × 48 cm footprint, and support 21 kg. No ingress-protection or ambient-temperature ratings are given in the supplied facts, so confirm lab climate limits with Eppendorf before placing it near heat sources.

What consumables and service items are not included in base delivery?

Rotors are separate selections among the four supported types, and Pivot Grease (order 5810 350.050) is a separate order item for pivot lubrication. No cables, controllers, or maintenance intervals are listed in the supplied facts; confirm with Eppendorf.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Centrifugation Certificate Material Safety Data Sheet MSDS Pivot Greas
Datasheet ·150,8 КБ ·8 pp.
View PDF