Eppendorf Centrifuge 5910 Ri - Connectivity and versatility
Eppendorf ·Made in Germany · In Active Production

Eppendorf Centrifuge 5910 Ri - Connectivity and versatility

Eppendorf Centrifuge 5910 Ri - Connectivity and versatility — Centrifuges.

The Centrifuge 5910 Ri is a refrigerated multipurpose laboratory centrifuge with a 1650 W motor, 100–14,000 rpm range and up to 22,132 × g with fixed-angle rotors. It accepts 10 rotor types, including swing-bucket (max 5,263 × g), plate and universal adapters, and holds 99 programs with 10 acceleration/braking ramps.

Full specifications

Core Performance & Functional Specifications
Acceleration/braking Ramps 10
Act Label yes
Blood Collection Tubes 120 mm
Capacity 68 gram
Conical Tubes 68 mL
Dimensions (w × D × H) 72 x 68 x 37 cm
Fixed-angle Rotors For High-speed Applications yes
Max. Rcf 22132 g
Max. Rcf With Fixed-angle Rotor 22132 g
Max. Rcf With Swing-bucket Rotor 5263 g
Number Of Programs 99
Plate Rotor Options For Mtp, Pcr Or Dwp yes
Plates 20
Rotational speed 100...14000 rpm
Rotor Fa-6x50 59 dB
Rotor S-4x750 57 dB
Temperature range -11...40 °C
Universal Adapters For Conical Tubes, Plates And Bottles yes
Rotors available mfr 10
Timer mfr 10 s to 99 h 59 min, with continuous run functio
Dimensions, Weight & Mechanical Design
Footprint (dimensions W/o Front Panel, Wxd) 72 cm
Height (with Open Lid) 85 cm
Product Weight 109 kg
Electrical, Power & Drive Specifications
Max. Power Consumption 1650 W
Voltage 230 V
Interfaces, Connections & Control
Power Plug power plug type F
Operating Conditions, Environment & Protection
Cooling refrigerated
Noise level 59 dB

Description

Construction and positioning

Behavior and modes

Installation and operation

Integration & Operating Notes

Electrical
230 V type F supply required for 1,650 W motor

The centrifuge is specified at 230 V with a type F power plug and a 1,650 W motor. The electrical circuit and outlet must be rated for this load; no other voltage variant is stated in the verified facts.

Factory Specification Sheet
Process Limits
Do not exceed 5,263 × g with swing-bucket rotors

Maximum RCF is 22,132 × g only with fixed-angle rotors; swing-bucket rotors are limited to 5,263 × g. Exceeding the rotor-specific limit risks rotor failure and invalid separation results.

Factory Specification Sheet
Mounting
Allow 85 cm height clearance for open lid

The unit is 37 cm high closed but 85 cm with the lid open, and weighs 109 kg. Bench or floor placement must provide this vertical clearance and support the weight; the footprint is 72 cm wide without the front panel.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the 5910 Ri instead of a smaller or non-refrigerated centrifuge in the same family?

Choose the 5910 Ri when you need refrigeration (−11 to 40 °C), up to 22,132 × g with fixed-angle rotors, and 10 rotor options including plate and swing-bucket rotors. A non-refrigerated or lower-capacity unit is sufficient only if temperature control and high-RCF fixed-angle work are not required.

What rotor and adapter compatibility must I confirm before ordering?

Confirm the rotor type against the application: fixed-angle for high-speed up to 22,132 × g, swing-bucket limited to 5,263 × g, plate rotors for MTP/PCR/DWP, and universal adapters for conical tubes, plates and bottles. Ten rotor options are listed; the specific rotor is not included in the base specification.

What maintenance and consumables are not included in the base delivery?

The verified facts list no maintenance schedule and no included rotors, adapters or cables beyond the power plug. Rotors, universal adapters and plate rotors are separate options; service intervals are not documented in the attached brochure digest.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Centrifugation Brochure Centrifuge 5910 Ri Accelerate Your Research.pd
Brochure ·1,8 МБ ·10 pp.
View PDF