Eppendorf Centrifuge CR22N - High-Speed Centrifuge
Eppendorf ·Made in Germany · In Active Production

Eppendorf Centrifuge CR22N - High-Speed Centrifuge

Eppendorf Centrifuge CR22N - High-Speed Centrifuge — Centrifuges.

The Eppendorf CR22N is a refrigerated floor-standing high-speed centrifuge driven by a 3.2 kW induction motor, reaching 22,000 rpm and 58,700 × g with the R27A fixed-angle rotor. Its rotary inverter compressor holds −20 to 40 °C across 6 × 1,000 mL or 4 × 1,500 mL capacity, with nine acceleration/deceleration profiles and 30 program memories.

Full specifications

Core Performance & Functional Specifications
Acceleration/deceleration Mode 9
Continuous Flow Rotor no
Drive Unit Induction Motor
Economy Mode yes
Interfaces USB port
Max. Rcf 58700 g
Number Of Programs 30
Operating Log Management 5
Refrigerator Rotary inverter driven compressor
Rotational speed 300...22000 rpm
Safety Devices Door interlock, overspeed detection, imbalance detection, rotor cover detection, over-temperature detection
Temperature range -20...40 °C
User Lockout Function yes
Vacuum System no
Variable Deceleration Slope yes
Max. capacity mfr 6 × 1,000 mL/4 × 1,500 mL
Separation example mfr High centrifugation speed of up to 58,700 x g wi
Power requirement mfr Single phase: AC200/208/220/230/240 V ±10%, 30 A
Dimensions, Weight & Mechanical Design
Footprint (dimensions W/o Front Panel, Wxd) 700 mm
Height (with Open Lid) 1510 mm
Product Weight 260 kg
Electrical, Power & Drive Specifications
Max. Power Consumption 3200 W
Power supply mfr 230 V, 50/60 Hz
Interfaces, Connections & Control
Keypad Touch sensitive LCD panel
Operating Conditions, Environment & Protection
Cooling refrigerated
Noise level 64 dB

Description

Construction and positioning

Operating behavior

Control and operation

Integration & Operating Notes

Electrical
Supply must deliver 30 A single-phase at the selected voltage

The unit is specified for AC 200/208/220/230/240 V ±10% at 30 A, 50/60 Hz. A 230 V branch sized only for the 3.2 kW motor power will be undersized once refrigeration and acceleration transients are included; verify breaker and cable rating against the 30 A figure before installation.

Factory Specification Sheet, Power requirement
Process Limits
Rotor choice sets the achievable g-force, not the drive alone

The 58,700 × g maximum is reached only with the R27A fixed-angle rotor at 22,000 rpm. Other rotors will have lower rated RCF and lower permissible speeds, so protocols must be validated against the specific rotor's rating rather than the instrument maximum.

Factory Specification Sheet, Separation example
Control & I/O
Door interlock and imbalance detection block a run start

The safety chain includes door interlock, overspeed, imbalance, rotor cover and over-temperature detection. A run will not start with the lid open or an improperly seated rotor cover, and imbalance detection will abort acceleration; balance tubes by weight before loading to avoid mid-run stops.

Factory Specification Sheet, Safety devices
Maintenance
Service agreements and IQ/OQ are separate from base delivery

Eppendorf epServices offers AdvancedCare, PremiumCare, Warranty 1 and Warranty plus 2 agreements plus Installation Service, IQ/OQ GxP, OQ GxP and Maintenance as on-demand items. These, and any USB cable or rotor, are not part of the base instrument and must be ordered and scheduled separately.

Services Flyer, epServices portfolio

Selection & Integration Q&A

When should I choose the CR22N rather than a micro-ultracentrifuge or ultracentrifuge from the same portfolio?

Pick the CR22N for 6 × 1,000 mL / 4 × 1,500 mL volumes at up to 58,700 × g and 22,000 rpm with the R27A rotor, with −20 to 40 °C refrigeration. Ultracentrifuge-class machines are needed only when higher g-force or vacuum operation is required; the CR22N has no vacuum system and no continuous-flow rotor.

What supply and adjacent equipment must be in place before the CR22N is installed?

A single-phase AC 200/208/220/230/240 V ±10%, 30 A, 50/60 Hz circuit is required; the 3.2 kW motor rating alone does not size the branch. A USB port is the only listed interface, so any logging or LIMS connection needs a host PC and cable supplied separately.

What service items and consumables are not included with the base instrument?

Rotors such as the R27A, USB cable and any GxP documentation are not part of base delivery. Eppendorf epServices supplies Installation Service, IQ/OQ GxP, OQ GxP and Maintenance on demand, plus AdvancedCare, PremiumCare, Warranty 1 and Warranty plus 2 agreements, which must be ordered and scheduled separately.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Services Flyer Services Ultra High Speed Centrifuges Full Eppendorf Se
Brochure ·1,5 МБ ·4 pp.
View PDF