Eppendorf DASbox ® /SciVario ® Mini Bioreactor
Eppendorf ·Made in Germany · In Active Production

Eppendorf DASbox ® /SciVario ® Mini Bioreactor

Eppendorf DASbox ® /SciVario ® Mini Bioreactor — Bioreactors & fermenters.

The DASbox® Mini Bioreactor for Cell Culture (model 76DS0250ODSS) is a 4-fold parallel benchtop system using autoclavable glass vessels with stainless steel GLS 80® head plates, working volume 60–250 mL (350 mL total). It is the cell-culture (CC) variant of the DASbox series, expandable in 4-fold increments to 24 parallel reactors, and is intended for controlled parallel cultivation screening in process development.

Full specifications

Description

Construction and series positioning

Vessel and media behavior

Control and operation

Integration & Operating Notes

Process Limits
Keep fill between 60 and 250 mL per vessel

The vessel is rated for a 60–250 mL working volume against a 350 mL total volume. Operating below the minimum leaves insufficient volume for the impeller and sensors; operating above the maximum removes the headspace needed for aeration and foam, so both limits must be respected when defining the fill recipe.

Fermentors Bioreactors Technical data DASbox Mini Bioreactor Cell Culture
Mounting
Autoclave the glass vessel with the GLS 80 head plate as one unit

The vessel is an autoclavable glass bioreactor with a stainless steel GLS 80® head plate. Sterilization is therefore a batch autoclave step on the assembled vessel, not an in-place steam cycle; the head-plate ports must be capped or fitted before autoclaving and the assembly cooled before connection to the gassing and sensor lines.

Fermentors Bioreactors Technical data DASbox Mini Bioreactor Cell Culture
Process Limits
Single-use operation requires switching to BioBLU 0.3 vessels

This model is delivered as an autoclavable glass-vessel configuration. To run single-use, the vessel must be replaced with a BioBLU 0.3 variant matched to the culture: BioBLU 0.3c for cell culture, 0.3f for microbiology, 0.3sc for stem cells. The glass vessel and the single-use vessel are not interchangeable without that change.

Fermentors Bioreactors Brochure DASbox Most Compact
Control & I/O
Plan capacity in 4-fold increments up to 24 reactors

The system is built from 4-fold units and expands in 4-fold increments to a maximum of 24 parallel bioreactors. Facility planning (bench space, gassing supply, controller channels) should therefore be laid out for the final 4/8/12/…/24 configuration rather than for a single unit, since each increment adds a full set of four vessels.

Fermentors Bioreactors Brochure DASbox Most Compact
Electrical
Electrical and interface data are not in the supplied digests

The attached technical data and brochure digests cover vessel volume, head plate, parallel expansion and vessel variants only; they contain no supply voltage, power, drive or controller I/O figures. Electrical integration must be taken from the full DASbox technical data sheet before specifying power distribution or signal wiring.

Fermentors Bioreactors Technical data DASbox Mini Bioreactor Cell Culture; Brochure DASbox Most Compact

Selection & Integration Q&A

When should I choose this glass-vessel CC model instead of the MB variant or an SU version?

Pick the CC glass model for autoclavable, reusable cell-culture vessels in the 60–250 mL range. Choose the MB variant for microbiology cultures, and an SU version with BioBLU 0.3c/0.3f/0.3sc vessels when single-use, non-autoclaved operation is required.

What vessel-side parts must match the GLS 80 head plate before I can connect sensors and gassing?

The vessel is an autoclavable glass body with a stainless steel GLS 80® head plate; sensors, gassing lines and sampling hardware must fit that head-plate port pattern. The supplied digests do not list port sizes, so confirm the port configuration against the full technical data sheet.

What duty-cycle and sterilization constraints apply to the glass vessel in daily use?

The vessel is autoclavable, so each run requires an autoclave cycle on the assembled glass vessel and head plate rather than in-place sterilization. Fill must stay within 60–250 mL working volume (350 mL total) to preserve headspace; the digests give no further cycle-count or lifetime limits.

What is not included in the base delivery that I must plan for?

The digests describe the 4-fold unit, glass vessel and GLS 80 head plate; sensors, gassing and sampling hardware, single-use BioBLU 0.3 vessels and controller/electrical accessories are not listed as included. Confirm the delivery scope and required accessories against the full technical data sheet before ordering.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Fermentors Bioreactors Technical data DASbox Mini Bioreactor Cell Cult
Datasheet ·168,8 КБ ·2 pp.
View PDF
PDF
Fermentors Bioreactors Brochure DASbox Most Compact
Brochure ·3,2 МБ ·4 pp.
View PDF