No photo available yet

Eppendorf ·Made in Germany · In Active Production

Eppendorf epMotion ® 5070 - Small and Compact Automated Pipetting

Eppendorf epMotion ® 5070 - Small and Compact Automated Pipetting — Automated pipetting systems.

The epMotion 5070 is a compact air-cushion automated pipetting system with a 0.2–1 mL working range, built for PCR/qPCR setup and normalization. Its 65 × 48 × 63 cm footprint, 45 kg mass and 200 W maximum draw place it as the small-frame member of the epMotion line, with four SLAS/ANSI deck positions and a 19.5-inch touch panel for on-deck programming.

Full specifications

Core Performance & Functional Specifications
Application PCR/qPCR and normalization
Autoclavable yes
Consumables epT.I.P.S. motion tips as racks or reload
Dimensions (w × D × H) 65 x 48 x 63 cm
Interfaces 4
Operating Mode automation
Pipetting Type Air-cushion system
Pipetting volume 0.2...1 mL
SLAS/ANSI positions mfr 4
Touch panel mfr 19.5'' diagonal
Dimensions, Weight & Mechanical Design
Product Weight 45 kg
Electrical, Power & Drive Specifications
Max. Power Consumption 200 W
Voltage 100 – 240 V

Description

Construction and positioning

Operation and control

Electrical and environment

Integration & Operating Notes

Process Limits
Pipetting range is capped at 0.2–1 mL per air-cushion transfer

Volumes below 0.2 mL or above 1 mL fall outside the specified pipetting range of this modification. For PCR/qPCR and normalization workflows, confirm that every transfer in the protocol lies inside 0.2–1 mL, otherwise a different epMotion modification or a dilution step is required.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the epMotion 5070 rather than a larger epMotion modification?

Pick the 5070 when the protocol fits 0.2–1 mL transfers and no more than 4 SLAS/ANSI deck positions, and bench space is limited to a 65 × 48 cm footprint. Larger deck or wider-volume work needs a different epMotion modification, since the 5070's range and 4-position deck are fixed.

What labware and consumables must be sourced to run the 5070?

The deck takes SLAS/ANSI-format labware in its 4 positions, and pipetting requires epT.I.P.S. motion tips, ordered as racks or reloads. Neither tips nor labware are part of the base delivery, so both must be specified alongside the instrument.

Which parts of the 5070 can be autoclaved, and what is consumed per run?

Autoclavable components are declared and may be sterilized between runs. Per run, epT.I.P.S. motion tips (rack or reload) are consumed and must be restocked; they are not included with the instrument.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Automated Liquid Handling Flyer epMotion GxP Unquestionable
Brochure ·2,2 МБ ·4 pp.
View PDF