Eppendorf Eppendorf Research ® 3 neo
Eppendorf Eppendorf Research ® 3 neo — Pipettes.
Single-channel mechanical air-cushion pipette covering 0.1–2.5 µL with 0.002 µL volume increment and dark-gray color code. The ACT label marks it as an environmentally assessed variant within the Research 3 neo line of 11 models spanning 0.1–10,000 µL. Intended for microliter-scale liquid transfer in laboratory workflows.
Full specifications
| Act Label | yes |
| Color Code | dark gray |
| Pipetting Type | Air-cushion system |
| Pipetting volume | 0.1...2.5 µL |
| Volume Increment | 0.002 µL |
| Number Of Channels | 1 |
Description
Construction and series positioning
- Mechanical air-cushion pipette, single channel, dark-gray color code, ACT-labeled.
- Within the Research 3 neo line of 11 models (0.1–10,000 µL, order numbers 3174 000 001–011), this is the 0.1–2.5 µL member — the smallest-volume end of the range.
- Volume setting increment is 0.002 µL, giving fine resolution at microliter scale.
Behavior and media
- Air-cushion principle: the aspirated liquid is separated from the piston by an air column, so the pipette is suited to aqueous solutions; no curve or viscosity data is provided for this model, so performance with volatile or high-viscosity liquids cannot be stated from the facts.
- No digitized curves or application notes are attached; behavior under load is not documented here.
Operation and accessories
- The attached technical-data digest covers the full 11-model line but contains no section-level facts for this specific model.
- ColorTag silicone marking rings (six sizes, twelve colors) are a separate accessory line for labeling pipettes; they are not part of base delivery.
Integration & Operating Notes
Because an air column separates piston from sample, the pipette is intended for standard aqueous laboratory liquids. The supplied documents give no correction data for volatile, viscous, or high-vapor-pressure media, so such use cannot be validated from these facts.
ColorTag silicone marking rings are offered in six diameters (19, 24, 27, 34, 50, 73 mm) and twelve colors, in packs of 10 or 5 pcs. They are an identification accessory for the lab, not part of the pipette's base delivery, and the correct ring size must be matched to the pipette body.
Selection & Integration Q&A
Pick this one when routine volumes fall between 0.1 and 2.5 µL with 0.002 µL steps. For larger volumes, the series offers 10 other single-channel models up to 10,000 µL; this model is the small-volume end of that 11-model line.
It is a mechanical air-cushion pipette, so it needs matching microliter pipette tips and a suitable tip rack; neither tips nor ColorTag marking rings are part of base delivery. ColorTag rings are ordered separately in the size matching the pipette body.
Volumes must stay within 0.1–2.5 µL and be set in 0.002 µL increments. The air-cushion principle is intended for standard aqueous liquids; the supplied documents provide no correction data for volatile or viscous media, so those uses are not validated.
The attached digests contain no service-interval or spare-part schedule for this model, so maintenance planning cannot be sourced from them. Consumables to budget separately are pipette tips and, if labeling is needed, ColorTag silicone rings in the matching diameter.