Eppendorf MiniSpin ® / MiniSpin ® plus - Mini Centrifuge
Eppendorf ·Made in Germany · In Active Production

Eppendorf MiniSpin ® / MiniSpin ® plus - Mini Centrifuge

Eppendorf MiniSpin ® / MiniSpin ® plus - Mini Centrifuge — Centrifuges.

The MiniSpin/MiniSpin plus is a non-refrigerated microcentrifuge with a fixed-angle rotor, reaching 13,400 rpm and 12,100 × g. It accepts up to 12 × 1.5/2.0 mL tubes and is suited to rapid pelleting and spin-down steps in molecular biology workflows.

Full specifications

Core Performance & Functional Specifications
Acceleration Time 1) 13 s
Deceleration Time 1) 12 s
Dimensions (w × D × H) 22,5 × 23,0 × 13,0 cm
Max. Rcf 12100 g
Max. Rcf With Fixed-angle Rotor 12100 g
Rotational speed 800...13400 rpm
Rotors available mfr 2
Max. capacity mfr 12 × 1.5/2.0 mL
Timer mfr 15 s – 30 min
Dimensions, Weight & Mechanical Design
Height (with Open Lid) 25 cm
Product Weight 3.7 kg
Electrical, Power & Drive Specifications
Max. Power Consumption 70 W
Voltage 230 V
Interfaces, Connections & Control
Power Plug power plug type F
Operating Conditions, Environment & Protection
Cooling non-refrigerated
Noise level 49 dB

Description

Construction and positioning

Performance and operation

Integration and control

Integration & Operating Notes

Process Limits
Do not exceed 12,100 × g with the fixed-angle rotor

The maximum RCF of 12,100 × g applies to the fixed-angle rotor configuration. Operating above this limit or with unapproved rotor/adaptor combinations may compromise tube integrity and rotor safety; always confirm the rotor and adapter rating before setting the speed.

Factory Specification Sheet
Maintenance
Inspect rotor and adapters for wear before each use

The brochure lists multiple rotor and adapter part numbers (e.g., F-45-24-11, FA-24x2, FA-24x2-PTFE). Regularly check these components for cracks, corrosion, or deformation, and replace them as needed to maintain safe operation; no specific service interval is provided in the supplied facts.

Centrifugation Brochure Microcentrifuges MiniSpin MiniSpin plus Centri

Selection & Integration Q&A

When should I choose the MiniSpin/MiniSpin plus over other microcentrifuges in the Eppendorf range?

Choose this model for non-refrigerated, routine spin-downs up to 12,100 × g and 12 × 1.5/2.0 mL tubes. For temperature-sensitive samples or higher capacity, consider refrigerated models such as the 5418 R or 5425 R, which are outside this model's scope.

What rotor and adapter options are available for the MiniSpin/MiniSpin plus, and how do they affect capacity?

Two rotors are available, including fixed-angle types. The maximum capacity is 12 × 1.5/2.0 mL. The brochure lists adapters such as FA-24x2 and FA-24x2-PTFE for different tube formats; select the rotor and adapter combination that matches your tube size and required RCF.

What maintenance and accessories are required for the MiniSpin/MiniSpin plus?

Regularly inspect rotors and adapters for wear; replacement parts are listed in the brochure (e.g., F-45-24-11, FA-24x2). No specific maintenance interval is given. Accessories such as additional rotors or adapters are not included in the base delivery and must be ordered separately.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Centrifugation Brochure Microcentrifuges MiniSpin MiniSpin plus Centri
Brochure ·6,8 МБ ·16 pp.
View PDF