Eppendorf Multipette ® E3/Multipette ® E3x - Electronic Repeating Pipette
Eppendorf ·Made in Germany · In Active Production

Eppendorf Multipette ® E3/Multipette ® E3x - Electronic Repeating Pipette

Eppendorf Multipette ® E3/Multipette ® E3x - Electronic Repeating Pipette — Pipettes.

The Multipette E3/E3x is a single-channel electronic repeating pipette using positive displacement with Combitips advanced or ViscoTip consumables, covering 1–50 mL. It is distinguished within the line by its rechargeable Li-ion battery and 100–240 V universal power input, with no autoclavability. It serves repetitive dispensing in laboratory liquid-handling workflows.

Full specifications

Core Performance & Functional Specifications
Act Label yes
Autoclavable no
Consumables Combitips ® advanced, ViscoTip ®
Delivery Content 2
Open System (third Party Consumables) no
Operating Mode electronic
Pipetting Type Positive displacement system
Pipetting volume 1...50 mL
Random Measurement Error see Combitips advanced
Systematic Measurement Error see Combitips advanced
Dimensions, Weight & Mechanical Design
Number Of Channels 1
Product Weight 190 g
Electrical, Power & Drive Specifications
Battery Type Rechargeable li-ion
Voltage 100 – 240 V
Interfaces, Connections & Control
Power Plug type A/type C/type G/type I
Display languages mfr 9 languages

Description

Construction and positioning

Behavior and media

Power, control and operation

Integration & Operating Notes

Process Limits
Only Combitips advanced and ViscoTip consumables fit the system

The open-system third-party consumable flag is 'no', so standard pipette tips cannot be substituted. Consumable supply must be planned around Eppendorf Combitips advanced and ViscoTip only, including the 0.1–50 mL size range.

Factory Specification Sheet
Maintenance
Do not autoclave the pipette body

The autoclavable flag is 'no', so sterilization of the instrument itself is excluded. Decontamination procedures must be limited to what the operating manual permits, and the wetted path is confined to the disposable Combitips advanced or ViscoTip.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the Multipette E3/E3x rather than another repeating pipette in the Eppendorf range?

Choose it for electronic, single-channel repetitive dispensing from 1 to 50 mL with positive displacement, where a rechargeable Li-ion battery and 100–240 V universal supply are needed. No sibling variants are documented in the verified facts, so comparison to other models cannot be made from this data.

What consumables and accessories must be ordered alongside the instrument?

Only Eppendorf Combitips advanced (0.1–50 mL) and ViscoTip are accepted; third-party tips are excluded. The delivery content is listed as quantity 2 but its composition is not specified, so consumable quantities and any accessories should be confirmed with the supplier.

Can the pipette be autoclaved or used with standard tips?

No. The autoclavable flag is 'no', and the open-system third-party consumable flag is 'no'. Sterilization and liquid contact are handled through disposable Combitips advanced or ViscoTip, not by autoclaving the body or fitting generic tips.

How is accuracy specified across the 1–50 mL range?

Systematic and random measurement error are both referenced to the Combitips advanced table rather than given as a single instrument figure. Accuracy must therefore be read per tip size from that table for each target volume.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Eppendorf Liquid Handling Brochure MultipetteE3 E3x Generation E
Brochure ·4,8 МБ ·8 pp.
View PDF