Eppendorf Multipette ® M4 - Repeating Pipette
Eppendorf Multipette ® M4 - Repeating Pipette — Pipettes.
The Multipette M4 is a single-channel, mechanically operated repeating pipette using positive displacement with Combitips advanced or ViscoTip consumables, covering a pipetting volume range of 1 to 10 mL. It is a closed system that accepts only Eppendorf consumables, and it is not autoclavable. Its primary purpose is repetitive dispensing of liquids in laboratory workflows where a mechanical hand tool is preferred over an electronic pipette.
Full specifications
| Act Label | yes |
| Autoclavable | no |
| Consumables | Combitips ® advanced, ViscoTip ® |
| Delivery Content | 2 |
| Open System (third Party Consumables) | no |
| Operating Mode | mechanical |
| Pipetting Type | Positive displacement system |
| Pipetting volume | 1...10 mL |
| Random Measurement Error | see Combitips advanced |
| Systematic Measurement Error | see Combitips advanced |
| Number Of Channels | 1 |
| Product Weight | 105 g |
| Battery Type | Button cell |
Description
Construction and positioning
- The Multipette M4 is a hand-held, single-channel repeating pipette driven by a mechanical operating mode, with a button cell providing the only electrical function (label/display assistance).
- It belongs to the Multipette series but is the mechanical variant; no sibling models were supplied for direct comparison, so positioning is limited to the facts given: mechanical operation, positive displacement, closed consumable system.
- The pipetting volume range is 1 to 10 mL, achieved through the attached Combitips advanced or ViscoTip dispenser tip rather than through an adjustable air-cushion mechanism.
Behavior and media
- Because it uses a positive displacement system, the dispensed volume is defined by the Combitips advanced tip in use; systematic and random measurement error are therefore referenced to the Combitips advanced data, not to the pipette alone.
- The closed-system design means third-party consumables are not supported; only Eppendorf Combitips advanced and ViscoTip tips are specified.
- No digitized curve points were provided, so no dispense-rate or viscosity behavior can be stated beyond the positive displacement principle.
Installation, control and operation
- The device is not autoclavable; sterilization of the pipette body is therefore excluded, and contamination control must rely on the consumable tips and external cleaning.
- The only document digest covers Combitips advanced consumables (9 sizes from 0.1 to 50 mL, 4 purity grades) and states that its technical specifications apply to the Multipette E3x system, not to the M4; consumable performance data for the M4 must therefore be taken from the M4-specific Combitips documentation.
- No electrical ratings, control interfaces, or installation instructions for the M4 itself were supplied in the verified facts.
Integration & Operating Notes
The pipette has no independent volume setting in the supplied facts; the 1–10 mL range is realized through the attached Combitips advanced or ViscoTip tip. Systematic and random error are referenced to the Combitips advanced specification, so the tip lot and size must be selected and documented as part of the method.
The unit is marked not autoclavable. Sterilization of the instrument itself is therefore excluded; decontamination must be done by wiping or by using the appropriate purity-grade consumable, and any protocol requiring autoclaved hardware must use a different pipette.
The open-system flag is 'no', so only Eppendorf Combitips advanced and ViscoTip consumables are specified. Attempting to fit other dispenser tips risks incorrect seating, volume error, or leakage, and voids the consumable-referenced accuracy data.
Selection & Integration Q&A
Choose the M4 when a mechanical, button-cell-assisted repeating pipette with positive displacement and 1–10 mL Combitips advanced/ViscoTip coverage is wanted. No sibling models were supplied, so comparison to electronic Multipette variants cannot be made from these facts.
Only Eppendorf Combitips advanced or ViscoTip tips are supported (closed system). The delivery content is listed as 2, but the facts do not specify which items; confirm the exact scope with the supplier before assuming tips or a stand are included.
No. The pipette is marked not autoclavable. Sterility must come from the purity grade of the Combitips advanced consumable (e.g., PCR clean, Biopur) rather than from autoclaving the instrument.