Peter Huber Kältemaschinenbau Piccolo 280 OLÉ Ultra-kompakter Laborkühler mit Peltiertechn
Peter Huber Kältemaschinenbau ·Made in Germany · In Active Production

Peter Huber Kältemaschinenbau Piccolo 280 OLÉ Ultra-kompakter Laborkühler mit Peltiertechn

Peter Huber Kältemaschinenbau Piccolo 280 OLÉ Ultra-kompakter Laborkühler mit Peltiertechn — Recirculating chillers with Noise level 60 dB.

The Piccolo 280 OLÉ is a refrigerant-free Peltier-based recirculating chiller with a 4–70 °C working range and a 0.1–0.2 l internal circuit. Its 0.03 kW cooling capacity at 4 °C and 1.85 l/min pressure pump suit small, low-load loops where refrigerant handling is restricted.

Noise level
60 dB

Full specifications

Core Performance & Functional Specifications
Noise level 60 dB(A)
Pump connection Connector with hose barb
Pump speed adjustable no
Pump type Pressure pump
Temperature range 4...70 °C
Dimensions, Weight & Mechanical Design
Weight 13 kg
Electrical, Power & Drive Specifications
Power supply 100-240V 1~/2~ 50/60Hz
Interfaces, Connections & Control
Controller OLÉ
Display resolution 0, 1 K
Digital interface USB (Device), RS232 Interface
Temperature display OLED Display
Operating Conditions, Environment & Protection
Ambient temperature limit 5...40 °C
Protection rating IP20
Standards, Safety & General Data
Safety class I / NFL

Description

Construction and series positioning

Thermal behavior and media

Installation, control and operation

Integration & Operating Notes

Process Limits
Low-temperature set points carry almost no cooling reserve

At 4 °C the unit provides only 0.03 kW, so any external heat load approaching this value will prevent the set point from being reached or held. Verify the actual load at the lowest required temperature before selecting this model.

Piccolo 280 OLÉ Technical Data Sheet, Specifications
Cooling & Media
Ambient above 20 °C reduces available cooling capacity

Published output is valid at 20 °C room temperature; higher ambient lowers cooling capacity. Install in a ventilated location and account for the actual room temperature when sizing the loop.

Piccolo 280 OLÉ Technical Data Sheet, Specifications
Electrical
Upstream protection must sit between 10 A and 16 A

The manufacturer specifies a minimum fuse of 10 A and a maximum of 16 A. A breaker outside this window risks nuisance tripping or inadequate protection; coordinate the site circuit before commissioning.

Piccolo 280 OLÉ Technical Data Sheet, Specifications
Electrical
Country-specific plug must be ordered with the unit

Single- and two-phase 100–240 V units ship with a power cable and a country-specific plug. Specify the plug type at order time to avoid rework at installation.

Piccolo 280 OLÉ Technical Data Sheet, Installation
Mounting
IP20 enclosure requires a dry, protected location

The unit is rated IP20 and must not be exposed to water spray or dust. Place it in a dry, sheltered position; ambient temperature must remain between 5 °C and 40 °C for correct operation.

Piccolo 280 OLÉ Technical Data Sheet, Specifications
Control & I/O
Autostart restarts the unit after a power failure

The autostart function automatically restarts the circulator after mains interruption. For unattended or sensitive processes, confirm whether this behavior is acceptable or must be disabled in the safety concept.

Piccolo 280 OLÉ Technical Data Sheet, Operation
Process Limits
External loop pressure drop must fit the fixed pump curve

The pressure pump delivers up to 1.85 l/min at up to 0.95 bar and is not speed-adjustable. Size hoses and external circuit components so that pressure drop stays within this head at the required flow.

Piccolo 280 OLÉ Technical Data Sheet, Specifications
Maintenance
Small internal volume limits fluid buffering and expansion

The internal cooling circuit holds only 0.1–0.2 l. Select fluid volume and expansion provisions accordingly; the low inertia gives fast response but little damping against sudden load changes.

Piccolo 280 OLÉ Technical Data Sheet, Specifications

Selection & Integration Q&A

When should I choose the Piccolo 280 OLÉ instead of another Piccolo variant?

Choose it when a refrigerant-free Peltier chiller is required and the load at the lowest set point is very small (0.03 kW at 4 °C). No sibling variants are listed for this series, so compare against other series if higher capacity or lower temperatures are needed.

What must I verify about the external loop and power supply before integrating this chiller?

Confirm the external circuit pressure drop fits the fixed pump (max 1.85 l/min at 0.95 bar) and that the 100–240 V, 1~/2~, 50/60 Hz supply is protected by a 10–16 A fuse. Specify the country-specific plug at order.

What mounting and ambient limits apply to the Piccolo 280 OLÉ?

Install in a dry, protected location: IP20 enclosure, ambient 5–40 °C. Cooling capacity is rated at 20 °C and falls at higher ambient, so ventilation and room temperature control are required.

What is included in base delivery and what must be ordered or planned separately?

The unit ships with a power cable and country-specific plug (specify at order). No accessories, external hoses, fittings or coolant are listed as included; plan pump connections (hose barb) and fluid separately.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Piccolo 280 OLÉ Technical Data Sheet
Datasheet ·149,7 КБ ·2 pp.
View PDF