Nabertherm GW 1660
Nabertherm GW 1660 — Fusing.
The GW 1660 is a 1660-litre wire-heated chamber furnace rated to 900 °C, built with a 2300 × 1200 × 600 mm working chamber and connected to a 3-phase supply. Within the GW series it is the mid-size modification, positioned between smaller units and the GW 2200 for large-volume fusing and heat-treatment batches. Its primary role is bulk thermal processing where uniform temperature across a wide, low-profile chamber matters more than rapid cycling.
Nabertherm GW Series — Model Comparison & Selection
| Model | Chamber volume, L | Weight, kg | Electrical connection | Max temperature, °C |
|---|---|---|---|---|
| GW 1660 Current | 1660 | 1780 | 3-phase | 900 |
| GW 2200 | 2200 | 2160 | 3-phase | 900 |
Full specifications
| Chamber volume | 1660 l |
| Electrical connection | 3-phase |
| Heating mfr | 80 |
| Inner dimensions (W × D × H) mfr | 2300 × 1200 × 600 mm |
| Outer dimensions (W × D × H) mfr | 3240 × 2030 × 1250 mm |
| Weight | 1780 kg |
| Max temperature | 900 °C |
Description
Construction and series positioning
- Wire heating elements, chamber volume 1660 l, maximum temperature 900 °C.
- Working chamber 2300 mm wide × 1200 mm deep × 600 mm high; outer envelope 3240 × 2030 × 1250 mm; unit weight 1780 kg.
- The GW 2200 is the only listed sibling; the GW 1660 is the smaller of the two, so specify it when the 2200-litre chamber of the GW 2200 is not required and floor space or batch size is constrained.
Thermal behaviour
- The 900 °C ceiling and wire heating suit fusing and general heat treatment below that limit; no curve points or heating-rate data are available for this model, so cycle design must be validated on the installed unit.
- The shallow 600 mm chamber height over a 2300 × 1200 mm floor favours flat, spread-out loads rather than tall stacks.
Control and documentation
- The attached controller digest covers the Nabertherm 500-series controllers and MyNabertherm app, including process-data storage and AMS2750F instrumentation types; no furnace-specific wiring or terminal data is printed in the supplied documents.
- The remaining digests (fiber optics, foundry, dental) describe other product lines and contain no GW 1660 facts.
Integration & Operating Notes
The empty unit weighs 1780 kg and occupies a 3240 × 2030 mm footprint; the floor and any raised platform must be rated for the furnace plus the batch, and clearance for door swing and service access around the 1250 mm height must be reserved.
No heating curves are supplied for this model, so soak times and ramp rates must be established empirically; loads and fixtures must be rated above the setpoint, and the 600 mm chamber height limits stack height for tall parts.
Selection & Integration Q&A
Pick the GW 1660 when a 1660-litre, 2300 × 1200 × 600 mm chamber at 900 °C covers the batch and the 1780 kg unit fits the floor plan. The GW 2200 is the larger sibling; choose it only when the bigger chamber is genuinely needed, since no other GW 2200 data is verified here.
Only the 3-phase connection is verified; voltage, current and connected load are not stated in the supplied facts. Obtain the nameplate data and size the feeder, protective device and isolator from it, and confirm the controller supply separately from the controller documentation.
The unit weighs 1780 kg with a 3240 × 2030 × 1250 mm envelope, so floor rating, transport route and door-swing clearance must be verified. No clearance or ventilation figures are printed in the supplied documents; these must be requested from the manufacturer before installation.
The supplied documents do not list a scope of delivery. Controller type, AMS2750F instrumentation, recorders and the MyNabertherm app linkage are described as options in the controller digest, so they must be specified on the order; no maintenance schedule or consumable list is included in the verified facts.