Nabertherm H 125/LB, LT
Nabertherm ·Made in Germany · In Active Production

Nabertherm H 125/LB, LT

Nabertherm H 125/LB, LT — Prozesse Unter Luft.

The H 125/LB, LT is a bottom-loading (top-hat) furnace with a 125-litre chamber (800 × 400 × 400 mm) and wire heating for a maximum temperature of 1280 °C. It is a 3-phase unit with 12 kW heating power and a 1250 kg total weight. Its 800 mm width and 400 mm height suit long, flat loads that are lowered into the chamber from below.

Full specifications

Core Performance & Functional Specifications
Chamber volume 125 l
Chamber volume 125 l
Chamber volume 125 l
Electrical connection 3-phase
Electrical connection 3-phase
Electrical connection 3-phase
Heatingpower in mfr 12
Inner dimensions (W × D × H) mfr 800 × 400 × 400 mm
Outer dimensions (W × D × H) mfr 1550 × 1500 × 2200 mm
Dimensions, Weight & Mechanical Design
Weight 1250 kg
Weight 1250 kg
Weight 1250 kg
Operating Conditions, Environment & Protection
Max temperature 1280 °C
Max temperature 1280 °C
Max temperature 1280 °C

Description

Construction and positioning

Behaviour under load

Installation, control and operation

Integration & Operating Notes

Electrical
Confirm 3-phase supply and protection against the nameplate

The verified data states only that the furnace is a 3-phase unit with 12 kW heating power; no voltage, current or fuse rating is given. The site supply, cable cross-section and upstream protection must be sized from the nameplate and wiring diagram supplied with the unit, not from this card.

Factory Specification Sheet
Mounting
Floor must carry 1250 kg plus load and allow bell travel

The furnace weighs 1250 kg and stands 2200 mm high with a 1550 × 1500 mm footprint. The floor and any substructure must support the furnace plus the workload, and the installation height must clear the bell in its raised position for loading from below.

Factory Specification Sheet
Process Limits
Chamber temperature must stay at or below 1280 °C

The wire-heated chamber is rated to a maximum of 1280 °C. No separate limit for the hearth or base is stated in the verified facts, so process recipes should be checked against the chamber limit and any additional limits in the operating manual before first use.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the H 125/LB, LT rather than another furnace in the Nabertherm range?

Choose it when the load is long and flat and must be placed from below: the 800 × 400 × 400 mm chamber is wide and shallow, and bottom loading avoids pushing heavy parts through a front door. No sibling models are listed in the verified data, so comparison with other sizes must come from the full catalog.

What supply and protection does the 3-phase, 12 kW connection require?

The verified data gives only 3-phase and 12 kW; voltage, current and fuse ratings are not stated. Size the cable and upstream protection from the nameplate and wiring diagram delivered with the furnace, and have the supply checked by an electrician before commissioning.

What maintenance and accessories are defined for this model in the verified data?

No maintenance intervals, spare parts, cables or consumables are listed for the H 125/LB, LT in the verified facts, and the attached document digests contain no model-specific service information. Service schedule and scope of delivery must be taken from the operating manual and order confirmation.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF