Nabertherm HFL 160/17
Nabertherm ·Made in Germany · In Active Production

Nabertherm HFL 160/17

Nabertherm HFL 160/17 — High-temperature furnaces.

The HFL 160/17 is a 160-litre high-temperature chamber furnace with molybdenum disilicide heating elements and refractory brick insulation, rated to 1700 °C. Its 500 × 550 × 550 mm chamber and 21.5 kW three-phase connection distinguish it from the smaller HFL 16/17 sibling. It serves laboratory and pilot-scale sintering, annealing, and high-temperature materials processing.

Full specifications

Core Performance & Functional Specifications
Chamber volume 160 l
Electrical connection 3-phase
Connected mfr 21.5
Inner dimensions (W × D × H) mfr 500 × 550 × 550 mm
Outer dimensions (W × D × H) mfr 1410 × 1240 × 2490 mm
Dimensions, Weight & Mechanical Design
Weight 1290 kg
Operating Conditions, Environment & Protection
Max temperature 1700 °C

Description

Construction and series positioning

Electrical and thermal behavior

Control and documentation

Integration & Operating Notes

Electrical
Three-phase supply and 21.5 connected load must be provisioned

The furnace is a 3-phase unit with a connected load listed as 21.5 in the factory extra specifications; the unit for this figure is not printed in the supplied facts, so verify kVA/kW and conductor sizing against the model-specific nameplate and manual before ordering the supply. Do not infer the load from the model code.

Factory Specification Sheet (extra specs: Connected 21.5; electrical_connection 3-phase
Process Limits
1700 °C ceiling is the process design limit

Maximum temperature is 1700 °C with MoSi₂ elements and refractory brick insulation. Process recipes and thermocouple selection must be rated for this ceiling; no heat-up or cooling curve data was supplied, so do not assume ramp rates from the series name.

Factory Specification Sheet (max_temperature 1700 °C

Selection & Integration Q&A

When should I choose the HFL 160/17 rather than the HFL 16/17?

Pick the HFL 160/17 when the workload needs the 160-litre, 500 × 550 × 550 mm chamber; the HFL 16/17 is the smaller sibling. Both share the 1700 °C MoSi₂/refractory brick architecture, so the choice is chamber size and batch geometry, not temperature class.

What supply and controller provisions must be in place before the furnace is connected?

A 3-phase supply sized for the 21.5 connected load (unit not stated in the supplied facts; confirm kVA/kW on the nameplate) and a compatible Nabertherm 500-series controller with the required AMS2750F instrumentation type. Terminal assignments are not in the supplied controller digest; use the model-specific wiring diagram.

What maintenance and accessories are defined for this model in the supplied documents?

No maintenance schedule, service intervals, or included accessories are stated in the supplied facts or document digests. MoSi₂ elements are consumable at 1700 °C duty, but replacement intervals are not documented here; request the model-specific manual and spare-parts list before commissioning.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF