Nabertherm HT 16/.. DB50
Nabertherm HT 16/.. DB50 — Furnace Solutions 1800 Degc.
The HT 16/.. DB50 is a 16-litre combi high-temperature furnace with a 200 × 300 × 260 mm chamber, built for debinding and sintering in a single process. Its 3-phase connection and 12 W heating power are stated in the source data, but the power figure is inconsistent with a 16-litre high-temperature chamber and is therefore not asserted as a rating. It serves as the process chamber in multi-step thermal cycles where binder removal and densification occur without intermediate handling.
Full specifications
| Chamber volume | 16 l |
| Electrical connection | 3-phase2 |
| Heating power | 12 watt |
| Inner dimensions (W × D × H) mfr | 200 × 300 × 260 mm |
| Outer dimensions (W × D × H) mfr | 810 × 645 × 1780 mm |
| Weight | 280 kg |
Description
Construction and series positioning
- Chamber volume is 16 l, with inner dimensions of 200 × 300 × 260 mm (W × D × H).
- Outer dimensions are 810 × 645 × 1780 mm (W × D × H); unit weight is 280 kg.
- The model code combines the HT high-temperature platform with a DB50 debinding configuration, indicating a combined debinding-and-sintering architecture rather than a plain high-temperature chamber.
- No sibling models are listed in the verified data, so positioning within the series cannot be quantified beyond the combi debinding/sintering role.
Electrical and thermal behavior
- The electrical connection is stated as 3-phase. The heating power entry reads 12 W, which is not physically consistent with a 16-litre high-temperature furnace; this value is omitted from the engineering description rather than reconciled.
- No digitized curve points are available, so heat-up rates, cooling behavior and atmosphere response cannot be characterized from the supplied facts.
Control and documentation context
- The attached controller document covers the Nabertherm 500-series controllers and the MyNabertherm app, including process-data storage and AMS2750F temperature-uniformity instrumentation types. It does not print furnace model sizes or ordering codes, so controller fitment for the HT 16/.. DB50 must be confirmed against the order configuration.
- The remaining attached digests (fiber-optics glass, foundry, dental) cover other product lines and contain no actionable facts for this model.
Integration & Operating Notes
The verified data lists a 3-phase connection but the heating-power entry (12 W) is not usable for supply sizing. The installer must obtain the nameplate connected load and fuse rating from the order documents before specifying cable cross-section, breaker and upstream protection; sizing from the published figure would undersize the feed.
Because debinding and sintering run in the same 200 × 300 × 260 mm chamber, the binder-removal stage and the high-temperature stage must be programmed as one cycle. The verified data contains no atmosphere, exhaust or purge specifications, so the binder-removal atmosphere and exhaust path must be defined from the process manual before the first run.
Selection & Integration Q&A
Choose it when debinding and sintering must run in one 16-litre chamber (200 × 300 × 260 mm) without intermediate transfer. If only sintering is needed, a plain high-temperature chamber avoids the debinding configuration; no sibling models are listed in the verified data, so compare against the order catalogue.
The data confirms a 3-phase connection but the listed 12 W heating power is not a usable load figure. Take the connected load and fuse rating from the nameplate or order documents and size cable, breaker and isolation accordingly; do not size from the published power entry.
The controller documentation covers 500-series controllers, process-data storage, MyNabertherm app and recorder/AMS2750F instrumentation options, but lists no furnace codes. Confirm the controller variant, recorder and any cables or consumables as separate order items; the verified data does not define base-delivery scope.