Nabertherm HT 64/16 LB, LT
Nabertherm HT 64/16 LB, LT — High-temperature furnaces.
The HT 64/16 LB/LT is a 64-litre bottom-loading high-temperature furnace with a 400 × 400 × 400 mm fiber-insulated chamber and molybdenum disilicide heating elements, rated to 1600 °C. It is a 3-phase unit weighing 1100 kg, distinguished within the series by its LB/LT bottom-loading configuration rather than a top-hat design. It serves laboratory and process applications requiring uniform high-temperature treatment with floor-level loading.
Full specifications
| Chamber volume | 64 l |
| Electrical connection | 3-phase |
| Heating power | 36 watt |
| Inner dimensions (W × D × H) mfr | 400 × 400 × 400 mm |
| Outer dimensions (W × D × H) mfr | 1100 × 1750 × 2400 mm |
| Weight | 1100 kg |
| Max temperature | 1600 °C |
Description
Construction and series positioning
- The HT 64/16 LB/LT is a bottom-loading furnace (LB/LT designation) with a 64-litre working volume and a cubic 400 × 400 × 400 mm chamber.
- Heating elements are molybdenum disilicide (MoSi₂) in a fiber-insulated chamber, enabling a 1600 °C maximum working temperature.
- The outer envelope measures 1100 × 1750 × 2400 mm (W × D × H) and the unit weighs 1100 kg, reflecting the mass of the fiber insulation and bottom-loading lift mechanism.
- Within the high-temperature top-hat/bottom-loading family, this model is the 64-litre, 1600 °C variant; no sibling models are documented in the supplied facts, so selection against other sizes cannot be quantified here.
Behavior and media
- No digitized heating or cooling curve points were supplied, so heating rates, uniformity figures and atmosphere capability cannot be stated for this model.
- The chamber is fiber-insulated; no controlled-atmosphere or vacuum specification is provided in the verified facts.
Installation, connection and control
- Electrical connection is 3-phase. The heating power value in the source table (36 W) is inconsistent with a 1600 °C, 64-litre furnace and is therefore omitted rather than reconciled.
- Controller and process-data functions are covered only by a generic Nabertherm controller document (series 500 / MyNabertherm app) that does not name this furnace model; no model-specific control configuration is verified.
- The attached document digests (fiber optics, foundry, dental catalogs) do not cover this furnace line and provide no model-specific installation facts.
Integration & Operating Notes
The furnace weighs 1100 kg and stands 2400 mm high with a 1100 × 1750 mm footprint. The installation point must support this mass, allow the bottom-loading mechanism to travel, and provide clearance above the unit for loading and for the lift path; verify against the site floor rating and ceiling height before delivery.
The fiber-insulated chamber is a fixed 400 mm cube; fixtures, crucibles and setters must be sized so that the load and any support furniture remain inside this envelope and do not contact the MoSi₂ elements. No atmosphere or vacuum capability is stated in the verified facts, so process media assumptions must be confirmed separately.
The only control documentation supplied is a generic Nabertherm controller digest (series 500 and MyNabertherm app) that does not name this furnace model. Do not assume a specific controller, recorder or AMS2750F instrumentation type is included; specify the control package explicitly on the order.
Selection & Integration Q&A
Pick this model when you need a 64-litre, 400 mm cubic chamber at up to 1600 °C with bottom loading for heavy or awkward loads. No sibling models are documented in the supplied facts, so compare other sizes and top-hat variants against their own published chamber volumes and temperature ratings.
A 3-phase supply is required; the connected load must be taken from the factory order documentation because the source power figure is not credible. No drive, controller or mating hardware is verified as included, so specify the control package and any recorder separately.
Allow for 1100 kg on a 1100 × 1750 mm footprint and 2400 mm height, with clearance for the bottom-loading lift and for loading from below. No duty-cycle, heating-rate or atmosphere limits are stated in the verified facts; confirm them with the factory before production use.
The verified facts contain no maintenance schedule, spare-parts list or consumables for this model, and the attached document digests do not cover this furnace line. MoSi₂ element condition and insulation are typical wear items for this class, but intervals must be obtained from the model-specific instruction manual.