Nabertherm KTR 22500
Nabertherm KTR 22500 — Heating Cabinets Chamber Ovens.
The KTR 22500 is a 22,500-litre electrically heated chamber oven with a 2000 × 4500 × 2500 mm interior, rated to 260 °C and powered by a 108 kW three-phase heating system. It is the largest chamber volume in the KTR series, positioned well above the KTR 1500 through KTR 6125 for full-load batch or bulk thermal processing.
Nabertherm KTR Series — Model Comparison & Selection
| Model | Chamber volume, L | Electrical connection | Max temperature, °C |
|---|---|---|---|
| KTR 22500 Current | 22500 | 3-phase | 260 |
| KTR 4500 | 4500 | 3-phase | 260 |
Full specifications
| Chamber volume | 22500 l |
| Electrical connection | 3-phase |
| Heating power in kW1 mfr | 108 |
| Inner dimensions (W × D × H) mfr | 2000 × 4500 × 2500 mm |
| Outer dimensions (W × D × H) mfr | 3015 × 5300 × 3550 mm |
| Max temperature | 260 °C |
Description
Construction and series positioning
- The KTR 22500 is the largest chamber-volume modification in the Nabertherm KTR chamber oven series; siblings KTR 1500, KTR 3100, KTR 4500 and KTR 6125 cover progressively smaller interiors.
- Interior working volume is 22,500 l with a 2000 mm width × 4500 mm depth × 2500 mm height chamber; outer envelope is 3015 × 5300 × 3550 mm, so the installation footprint and door swing must be planned around the outer dimensions, not the chamber.
- Heating is electric with a 108 kW installed heating power on a three-phase supply; maximum chamber temperature is 260 °C.
Behaviour and media
- The series catalog places KTR chamber ovens in the up-to-260 °C class, below the TR ovens (up to 300 °C) and far below forced-convection NAT/NA furnaces (up to 900 °C); the KTR 22500 is therefore a bulk thermal chamber, not a high-temperature furnace.
- LS variants with safety technology per EN 1539 exist for TR and KTR models; the verified facts for this exact model do not state an LS configuration, so solvent-charged loads must not be assumed permissible without confirming the safety package.
- No digitized curve points were supplied for this model; heat-up and uniformity behaviour cannot be quoted from the available facts.
Control and operation
- The Nabertherm controller series 500 and the MyNabertherm app are the documented control platform for the series, covering process-data storage and temperature-uniformity instrumentation per AMS2750F types; recorder and controller options are separate selections.
- The controller documentation does not print furnace model sizes or ordering codes, so controller configuration must be matched to the KTR 22500 at order stage rather than inferred from the controller manual.
Integration & Operating Notes
The 108 kW installed heating power on a three-phase connection sets the service size, cable cross-section and upstream protection; the supply and switchgear must be engineered for this load before the oven is sited, and no single voltage is stated in the verified facts, so the site voltage must be confirmed against the order.
The KTR series tops out at 260 °C, below the TR ovens rated to 300 °C; processes requiring higher temperature or forced convection up to 900 °C belong to the NAT/NA furnace family, not to this chamber oven.
LS variants with safety technology per EN 1539 are catalogued for TR and KTR models, but the verified facts for the KTR 22500 do not confirm an LS configuration; any process releasing flammable vapours must be checked against the ordered safety equipment before operation.
The series 500 controller and MyNabertherm app documentation covers process-data storage and AMS2750F instrumentation types but prints no furnace model codes; controller, recorder and uniformity instrumentation must be specified alongside the KTR 22500 rather than assumed from the controller manual.
Selection & Integration Q&A
Pick the KTR 22500 when the batch needs the full 22,500 l chamber (2000 × 4500 × 2500 mm) at up to 260 °C; the KTR 1500, 3100, 4500 and 6125 cover smaller interiors, so a smaller sibling is the right choice when the load fits and the 108 kW heating load and 3015 × 5300 × 3550 mm envelope are not justified.
A three-phase supply engineered for the 108 kW heating power, plus a controller from the Nabertherm series 500 platform (with MyNabertherm app and optional recorder/AMS2750F instrumentation). The verified facts state three-phase connection but no voltage, so the site voltage must be confirmed against the order before switchgear is sized.
The oven occupies a 3015 × 5300 × 3550 mm outer envelope around its 2000 × 4500 × 2500 mm chamber, so transport route, floor loading and door swing must be planned from the outer dimensions. Chamber temperature is limited to 260 °C, and solvent-releasing loads need the EN 1539 LS safety package, which is not confirmed for this unit in the verified facts.
The controller (series 500 with MyNabertherm app), recorder and AMS2750F temperature-uniformity instrumentation are documented as separate controller/recorder options, not integral to the oven. The verified facts list no accessories, cables or consumables, so the supply-side switchgear and any LS safety equipment must be confirmed at order stage.