Nabertherm L(T) 5/12
Nabertherm L(T) 5/12 — Muffle furnaces.
The L(T) 5/12 is a 5-litre muffle furnace with a 1200 °C maximum working temperature and a 2.6 kW single-phase heating system. Its 205 × 170 × 130 mm chamber and 59-minute heating time position it as the smallest 1200 °C modification in the Nabertherm L(T) series, suited to laboratory batch firing, ashing and heat-treatment of small samples.
Full specifications
| Chamber volume | 5 l |
| Electrical connection | 1-phase |
| Nominal power | 2.6 kW |
| Temperature uniformity | 170 °C |
| Heating time mfr | 59 min |
| Inner dimensions (W × D × H) mfr | 205 × 170 × 130 mm |
| Outer dimensions (W × D × H) mfr | 385 × 390 mm |
| Weight | 27 kg |
| Max temperature | 1200 °C |
Description
Construction and series positioning
- The L(T) 5/12 is the 5-litre chamber variant of Nabertherm's 1200 °C muffle furnace line; the model code's '5' denotes chamber volume, not a rating.
- Chamber dimensions of 205 × 170 × 130 mm (W × D × H) and an outer footprint of 385 × 390 mm define a compact benchtop unit at 27 kg.
- Heating is via a 2.6 kW single-phase element set; the 1200 °C ceiling places it in the higher-temperature branch of the series (the same family also spans 1100 °C models).
Thermal behaviour
- The stated heating time of 59 minutes describes the ramp to working temperature; the 170 °C temperature-uniformity figure is the spread to be expected across the chamber, so sample placement should account for a gradient of this order rather than assuming isothermal conditions.
- No digitized curve points are available for this model, so ramp and soak programming must be validated empirically for the specific load.
Control and documentation
- The attached controller documentation covers the Nabertherm 500-series controllers and the MyNabertherm app, including process-data storage and AMS2750F instrumentation types; the furnace is therefore compatible with programmable control and data logging, but the base delivery configuration is not specified in the verified facts.
- Other attached digests (glass, foundry, dental) describe different product lines and do not contain model-specific data for the L(T) 5/12.
Integration & Operating Notes
At 2.6 kW on a single-phase connection the furnace draws a substantial current for a benchtop unit; the supply circuit, protective device and cable cross-section must be sized for this load and the unit should not share a circuit with other high-draw laboratory equipment.
The 170 °C temperature-uniformity figure means that parts of the chamber can deviate substantially from the setpoint; samples requiring tight thermal tolerance must be positioned in the verified uniform zone or the process must be qualified with a test load before use.
The controller documentation covers 500-series controllers and the MyNabertherm app with process-data storage and AMS2750F instrumentation types, but the base furnace delivery configuration is not stated; the required controller, program memory and recording functions must be confirmed at order.
The verified documents contain no service schedule for the L(T) 5/12; maintenance intervals, thermocouple replacement and element inspection must be taken from the furnace operating manual supplied with the unit rather than assumed from this card.
Selection & Integration Q&A
Choose the 5/12 when sample batches fit within 205 × 170 × 130 mm and the 59-minute heat-up is acceptable; larger siblings trade bench space and power for capacity, so the 5-litre unit is the right pick only for small, frequent batches.
It needs a single-phase supply sized for the 2.6 kW load on its own circuit. Controller, program memory and data logging are not fixed by the verified facts; confirm the 500-series controller or MyNabertherm option at order.
The verified facts do not define the base scope; controller type, recording software and thermocouples appear as options in the controller documentation, so accessories and consumables must be confirmed against the order configuration.