Nabertherm LE 1/11
Nabertherm LE 1/11 — Dental burnout furnaces.
The LE 1/11 is a 1-litre, 1-phase compact burnout furnace rated to 1100 °C with 1.6 kW nominal power, positioned as the smallest chamber in the LE ../11 series (sibling LE 6/11 offers 6 l). Its 90 × 115 × 110 mm chamber and 6-minute heating time suit short-cycle dewaxing/burnout of small dental investment molds. Temperature uniformity is specified at 40 °C.
Nabertherm LE Series — Model Comparison & Selection
| Model | Chamber volume, L | Temperature uniformity, K | Weight, kg | Electrical connection | Max temperature, °C |
|---|---|---|---|---|---|
| LE 1/11 Current | 1 | 313.1 | 15 | 1-phase | 1100 |
| LE 6/11 | 6 | 393.1 | 27 | 1-phase | 1100 |
Full specifications
| Chamber volume | 1 l |
| Chamber volume | 1 l |
| Electrical connection | 1-phase |
| Electrical connection | 1-phase |
| Nominal power | 1.6 kW |
| Temperature uniformity | 40 °C |
| Temperature uniformity | 40 °C |
| Heating time mfr | 6 min |
| Inner dimensions (W × D × H) mfr | 90 × 115 × 110 mm |
| Outer dimensions (W × D × H) mfr | 310 × 300 × 410 mm |
| Weight | 15 kg |
| Weight | 15 kg |
| Max temperature | 1100 °C |
| Max temperature | 1100 °C |
Description
Construction and series positioning
- The LE 1/11 is the 1-litre member of the LE ../11 burnout furnace line; the sibling LE 6/11 provides a 6-litre chamber for larger mold throughput.
- Chamber dimensions 90 × 115 × 110 mm (W × D × H); outer envelope 310 × 300 × 410 mm; unit weight 15 kg.
- Single-phase electrical connection at 1.6 kW nominal power, maximum temperature 1100 °C.
- No certificates or application data are declared for this model in the verified facts.
Thermal behavior
- Specified temperature uniformity is 40 °C; heating time is 6 min (factory value, no measurement condition stated).
- No digitized curve points are available, so no heat-up or load-response profile can be asserted beyond the stated heating time.
Control and operation
- The attached controller digest covers the Nabertherm 500-series controllers and MyNabertherm app (process data storage, AMS2750F instrumentation types, recorder/controller options) but prints no LE model codes; controller fit for the LE 1/11 is therefore not confirmed by the documents.
- The dental brochure lists the LE ../11 burnout furnace family alongside the D580 controller; specific pairing for the LE 1/11 is not stated in the digest.
Integration & Operating Notes
Maximum temperature is 1100 °C; any burnout or sintering program setpoint, including overshoot from controller tuning, must remain below this limit to avoid element and insulation damage. The 40 °C uniformity figure means edge-of-chamber loads see a spread around setpoint.
The controller digest describes 500-series functions, process data storage and AMS2750F instrumentation types without naming LE models; verify the actual controller variant and any recorder option against the order before designing data-logging or validation workflows.
Selection & Integration Q&A
Pick the LE 1/11 for small, short-cycle dental burnout loads that fit its 90 × 115 × 110 mm chamber and benefit from the 6-minute heating time at 1.6 kW. Move to the LE 6/11 when mold size or batch count exceeds the 1-litre chamber.
It requires a 1-phase feed sized for 1.6 kW. The controller digest covers 500-series controllers and the MyNabertherm app but names no LE model, so confirm the ordered controller variant and any recorder option before wiring data-logging or AMS2750F-type instrumentation.
The verified facts list no included accessories, cables or consumables, and no service intervals. Controller options, recorders and the MyNabertherm app described in the controller digest are separate items; maintenance scheduling must come from the furnace manual, not this data set.