Nabertherm LE 6
Nabertherm LE 6 — Dental burnout furnaces.
The LE 6 is a ceramic and stainless steel accessory set for Nabertherm dental burnout furnaces, comprising a ribbed plate (190 x 170 x 12.7 mm) and a collecting pan (190 x 170 x 20 mm ceramic or 160 x 200 x 20 mm stainless steel 1.4828). It is not a standalone furnace but a work-holding and spill-containment modification for the LE series, sized to fit the furnace chamber and protect the muffle from wax and alloy residue during burnout cycles.
Full specifications
| Ceramic ribbed plate mfr | 190 x 170 x 12,7 |
| Ceramic collecting pan mfr | 190 x 170 x 20 |
| Stainless steel collecting pan (Material 1.4828) mfr | 160 x 200 x 20 |
Description
Construction and positioning
- The LE 6 is an accessory kit, not a furnace: it consists of a ceramic ribbed plate (order code 691600508, 190 x 170 x 12.7 mm) and a matching collecting pan, available in ceramic (691600511, 190 x 170 x 20 mm) or stainless steel 1.4828 (6000095954, 160 x 200 x 20 mm).
- Within the LE series, this set is the chamber furniture that sits inside the burnout furnace; the sibling model code LE 6 refers to the same accessory set, so there is no alternative size in the provided facts.
- The ribbed plate supports dental restorations or flasks above the pan, while the pan captures wax, investment residue and alloy spills before they reach the furnace floor.
Behavior under load and media
- The ceramic plate and pan are intended for direct exposure to the burnout furnace atmosphere; the stainless steel pan (1.4828) is an alternative for applications where a metallic collector is preferred.
- No temperature rating, load capacity or thermal cycling data is provided in the verified facts; these must be confirmed against the furnace manual before use.
Installation and operation
- The plate and pan are placed inside the furnace chamber; the ribbed plate rests on or above the collecting pan. No mounting hardware or connection is specified in the facts.
- The document digests cover Nabertherm controllers (series 500 and MyNabertherm app) and dental furnace brochures, but do not contain LE 6-specific installation instructions; refer to the furnace manual for chamber loading limits.
Integration & Operating Notes
Wax and investment residue accumulate in the pan; the ribbed plate must be lifted out to access it. The facts do not specify a cleaning interval, so establish a schedule based on residue build-up and inspect the ceramic for cracks before each run to avoid contaminating the furnace chamber.
The ceramic pan (691600511) and stainless steel 1.4828 pan (6000095954) have different footprints (190 x 170 mm vs 160 x 200 mm), so the choice affects how the set sits in the chamber. The facts give no temperature or chemical resistance data for either material; confirm suitability with the furnace manufacturer for the specific burnout program.
Selection & Integration Q&A
The verified facts list only LE 6 as the sibling model, so there is no alternative LE variant to compare. Choose LE 6 when you need a 190 x 170 mm ribbed plate with either a ceramic or stainless steel collecting pan for a compatible Nabertherm dental burnout furnace; confirm chamber fit first.
The LE 6 is passive chamber furniture: it requires only that the host burnout furnace chamber accept the 190 x 170 mm plate and the 190 x 170 mm or 160 x 200 mm pan. No electrical, gas or controller connection is specified; the controller digests (series 500, MyNabertherm app) are unrelated to this accessory.
The facts provide no mounting hardware, maximum temperature or load rating. Place the set flat on the furnace floor or hearth, ensure the ribbed plate is stable, and do not exceed the furnace manufacturer's chamber load limit; the ceramic components should be inspected for cracks before each cycle.
The base delivery is the ribbed plate plus one collecting pan (ceramic or stainless steel, depending on order code). No cleaning tools, spare plates or replacement pans are listed as included. Establish a cleaning routine after each burnout cycle and order replacement ceramic parts if cracking occurs.