Nabertherm LHT 01/17 D
Nabertherm ·Made in Germany · In Active Production

Nabertherm LHT 01/17 D

Nabertherm LHT 01/17 D — Dental sintering furnaces.

The LHT 01/17 D is a 1-litre, 1-phase dental sintering furnace reaching 1650 °C with a 30 kg maximum load. Its 110 × 120 × 120 mm chamber distinguishes it from the larger LHT 03/17 D sibling. It is intended for high-temperature sintering of dental zirconia and similar frameworks.

Nabertherm LHT Series — Model Comparison & Selection

Model Chamber volume, LMaximum load, kgWeight, kgElectrical connectionMax temperature, °C
LHT 01/17 D Current 130281-phase1650
LHT 03/17 D 375381-phase1650

Full specifications

Core Performance & Functional Specifications
Chamber volume 1 l
Chamber volume 1 l
Electrical connection 1-phase
Electrical connection 1-phase
Maximum load 30 kg
Connected mfr 1.95
Max. heating rate up to 1000 °C mfr 27
Inner dimensions (W × D × H) mfr 110 × 120 × 120 mm
Outer dimensions (W × D × H) mfr 385 × 425 mm
Heating time mfr 27 min
Dimensions, Weight & Mechanical Design
Weight 28 kg
Weight 28 kg
Operating Conditions, Environment & Protection
Max temperature 1650 °C
Max temperature 1650 °C

Description

Construction and series positioning

Thermal behaviour

Control and operation

Integration & Operating Notes

Electrical
Single-phase supply sized for the 1.95 connected load

The furnace is a 1-phase unit with a connected load of 1.95 as printed in the factory data; the unit for this figure is not stated in the source, so verify it against the nameplate before specifying the supply circuit and protective device.

Factory Specification Sheet
Process Limits
Do not exceed 30 kg load or 1650 °C

Maximum load is 30 kg and maximum temperature is 1650 °C. Exceeding either limit risks damage to the chamber and invalid sintering results; the 1-litre chamber (110 × 120 × 120 mm) physically constrains the batch anyway.

Factory Specification Sheet
Control & I/O
Controller options documented separately from the furnace

The controller digest covers the 500 series and MyNabertherm app with process-data storage and AMS2750F instrumentation types, but prints no furnace model codes; the dental brochure pairs the LHT ../17 D series with controller D580. Confirm the actual controller and any recorder option at order.

Prozesssteuerung englisch; Dental english

Selection & Integration Q&A

When should I choose the LHT 01/17 D rather than the LHT 03/17 D?

Pick the LHT 01/17 D for small batches: its 1-litre chamber (110 × 120 × 120 mm) and 28 kg unit weight suit compact labs. The LHT 03/17 D sibling offers a larger chamber when throughput per cycle matters more than footprint.

What supply and controller arrangement does this furnace need?

It is a 1-phase unit with a 1.95 connected load (unit not stated in the source; check the nameplate). Controller documentation covers the 500 series and MyNabertherm app, and the dental brochure pairs the series with controller D580; confirm the delivered controller before wiring.

What are the mounting and duty limits for this model?

Maximum load is 30 kg and maximum temperature 1650 °C; the factory data gives a heating rate of 27 up to 1000 °C (unit not stated). The supplied document digests contain no mounting clearances or duty-cycle rules for this model, so request the installation manual.

What maintenance and accessories are defined for the LHT 01/17 D?

The supplied document digests list no maintenance intervals, error codes or consumables for this model, and no accessories or cables are identified as included or excluded. Obtain the operating manual and order checklist from Nabertherm before commissioning.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF