Nabertherm LHT 08/17 BO
Nabertherm LHT 08/17 BO — High-temperature furnaces.
The LHT 08/17 BO is a 6-litre high-temperature furnace with integrated catalytic post-combustion, rated to 1750 °C and powered by a 14.3 kW 3-phase connection. Its 150 × 250 × 150 mm chamber accepts up to 75 units of organic substances with a maximum evaporation rate of 1 unit, making it suited for processes requiring controlled burn-off of binders or contaminants.
Full specifications
| Chamber volume | 6 l |
| Electrical connection | 3-phase |
| Nominal power | 14.3 kW |
| Max. evaporation rate of organic substances mfr | 1 |
| Inner dimensions (W × D × H) mfr | 150 × 250 × 150 mm |
| Outer dimensions (W × D × H) mfr | 530 × 705 mm |
| Weight | 90 kg |
| Max. loading weight of organic substances mfr | 75 |
| Max temperature | 1750 °C |
Description
Construction and series positioning
- The LHT 08/17 BO is a chamber furnace with a 6-litre working volume and a maximum temperature of 1750 °C. The 'BO' designation indicates integrated catalytic post-combustion, a feature that distinguishes this modification from standard LHT models without exhaust treatment.
- The chamber measures 150 mm wide × 250 mm deep × 150 mm high, and the outer dimensions are 530 mm wide × 705 mm deep (height not stated). The unit weighs 90 kg.
- No sibling models are listed in the verified facts, so direct series comparisons are limited to the general LHT platform.
Process behaviour and limits
- The furnace is designed for processing organic substances: the maximum loading weight of organic substances is 75 (unit not specified) and the maximum evaporation rate is 1 (unit not specified). These limits must be observed to avoid exceeding the catalytic post-combustion capacity.
- No digitized curve points are available; temperature uniformity and heating rates are not specified in the provided facts.
Electrical and control
- The furnace requires a 3-phase electrical connection with a nominal power of 14.3 kW. No voltage or frequency is stated in the matched specs; the electrical connection must be sized accordingly.
- Controller and process control details are not included in the verified facts for this model. The document digests reference Nabertherm controller series 500 and the MyNabertherm app, but these are general and not confirmed as standard or optional for the LHT 08/17 BO.
Installation and operation
- The PDF digests do not contain actionable engineering facts specific to this model. Installation, connection, and operation specifics must be derived from the general Nabertherm documentation or the model-specific manual, which is not provided here.
Integration & Operating Notes
The furnace draws 14.3 kW at full power. The electrical installation must provide a 3-phase supply capable of this load, with appropriate overcurrent protection and cable sizing. Voltage and frequency are not specified in the verified facts and must be confirmed from the nameplate or manual before connection.
The maximum loading weight of organic substances is 75 (unit not specified) and the maximum evaporation rate is 1 (unit not specified). Exceeding these limits may overload the catalytic post-combustion and lead to incomplete oxidation or damage. The units must be confirmed from the manual.
The integrated catalytic post-combustion is a consumable component that degrades over time, especially when processing organic substances. Regular inspection and replacement according to the manufacturer's schedule are necessary to maintain exhaust treatment efficiency. No specific interval is provided in the verified facts.
Selection & Integration Q&A
Choose the BO variant when processing organic substances that produce fumes or odors requiring catalytic post-combustion to meet emission limits. For clean processes without organic burn-off, a standard LHT model avoids the additional cost and maintenance of the catalyst.
The furnace requires a 3-phase supply with 14.3 kW nominal power. Voltage and frequency are not specified in the verified facts; confirm from the nameplate. A suitable disconnect and overcurrent protection must be provided. No controller details are available for this model.
The catalytic post-combustion element requires periodic inspection and replacement. No specific interval is given in the verified facts. Consumables such as crucibles, thermocouples, and exhaust filters are not included unless ordered separately. Refer to the manual for details.