Nabertherm N 300 BO
Nabertherm ·Made in Germany · In Active Production

Nabertherm N 300 BO

Nabertherm N 300 BO — Thermal Cleaning Ashing.

The N 300 BO is a 300-litre chamber furnace rated to 1000 °C, purpose-built for processes with high evaporation rates of organics and for thermal cleaning by incineration. Its 550 × 700 × 780 mm chamber accepts up to 2000 units of organic loading, with a 20-unit output burner supporting controlled burn-off. It sits in the BO series alongside the larger NB 650 BO.

Nabertherm Chamber Furnaces N(B) .. BO for Processes with High Evaporation Rates of Organics or for thermal cleaning by incineratio Series — Model Comparison & Selection

Model Chamber volume, LMax temperature, °C
N 300 BO Current 3001000
NB 650 BO 6501000

Full specifications

Core Performance & Functional Specifications
Chamber volume 300 l
Output burner in mfr 20
Inner dimensions (W × D × H) mfr 550 × 700 × 780 mm
Outer dimensions (W × D × H) mfr 1350 × 1450 × 1750 mm
Dimensions, Weight & Mechanical Design
Max. loading weight of organic substances mfr 2000
Operating Conditions, Environment & Protection
Max temperature 1000 °C

Description

Construction and series positioning

Process behaviour

Control and documentation

Integration & Operating Notes

Process Limits
Organic charge must stay within the 2000 loading limit

The furnace is rated for a maximum loading weight of organic substances of 2000. Exceeding this charge mass during incineration or high-evaporation processing overloads the burn-off duty the chamber and output burner were sized for; batch the organics to stay at or below the stated limit.

Factory Specification Sheet
Process Limits
Chamber temperature must not exceed 1000 °C

The maximum temperature of the N 300 BO is 1000 °C. Thermal cleaning and evaporation cycles must be programmed so the chamber never runs above this ceiling; the controller setpoint and any over-temperature protection should be configured accordingly.

Factory Specification Sheet
Control & I/O
Controller functions documented only at series level

The controller digest describes the Nabertherm 500-series controllers and MyNabertherm app, including process data storage and AMS2750F instrumentation types, but prints no model-specific wiring or parameter set for the N 300 BO. Confirm the delivered controller configuration against the order before commissioning.

Prozesssteuerung englisch

Selection & Integration Q&A

When should I choose the N 300 BO rather than the NB 650 BO?

Pick the N 300 BO when the batch fits its 300 l chamber and stays within the 2000 organic loading limit at up to 1000 °C. The NB 650 BO is the larger sibling for bigger batches; no further NB 650 BO data is available in the supplied facts.

Which controller and process-data functions are documented for this furnace?

The supplied controller digest covers the Nabertherm 500-series controllers and MyNabertherm app, including process data storage and AMS2750F instrumentation types, but gives no model-specific settings for the N 300 BO; verify the delivered configuration at commissioning.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF