Nabertherm N 87/H
Nabertherm N 87/H — Prozesse Unter Schutzgasen.
The N 87/H is a 3-phase electrically heated chamber furnace with an 87-litre chamber (350 × 1000 × 250 mm W×D×H) rated to 1280 °C, positioned in the Nabertherm N/H series between the smaller N 41/H and the N 81 variants. Its long, shallow chamber geometry suits flat or elongated loads requiring uniform temperature exposure under protective-gas processes.
Full specifications
| Chamber volume | 87 l |
| Chamber volume | 87 l |
| Chamber volume | 87 l |
| Chamber volume | 87 l |
| Electrical connection | 3-phase |
| Electrical connection | 3-phase |
| Electrical connection | 3-phase |
| Electrical connection | 3-phase |
| Heating mfr | 25.0 |
| Inner dimensions (W × D × H) mfr | 350 × 1000 × 250 mm |
| Outer dimensions (W × D × H) mfr | 1040 × 1680 × 1340 mm |
| Weight | 480 kg |
| Weight | 480 kg |
| Weight | 480 kg |
| Weight | 480 kg |
| Max temperature | 1280 °C |
| Max temperature | 1280 °C |
| Max temperature | 1280 °C |
| Max temperature | 1280 °C |
Description
Construction and series positioning
- The N 87/H is the 87-litre member of the Nabertherm N/H chamber furnace family, sharing the 1280 °C maximum temperature class with the N 41/H and N 81/13 siblings. The N 81 is a different temperature class and should not be substituted where 1280 °C is required.
- Chamber dimensions of 350 mm width × 1000 mm depth × 250 mm height define a long, low working volume; the outer envelope is 1040 × 1680 × 1340 mm and the unit weighs 480 kg, so floor loading and access clearance must be planned around a substantially larger footprint than the chamber suggests.
- Electrical supply is 3-phase; the heating rating is given as 25.0 in the factory data without a printed unit, so the connected load must be confirmed against the nameplate before sizing the supply.
Behaviour under process conditions
- The 1280 °C ceiling places this model in the protective-gas process category: above roughly 700–800 °C, atmospheric oxygen must be excluded to protect both load and heating elements, which is why the unit is grouped under Prozesse Unter Schutzgasen.
- No digitized heating or cooling curves were supplied for this model, so ramp behaviour cannot be quoted; cycle design must be based on the controller programme and verified by a trial run with the actual load.
Control and documentation
- The attached controller documentation covers the Nabertherm 500 series and the MyNabertherm app, including process-data storage and AMS2750F instrumentation types; it does not print model-specific wiring, so the furnace wiring diagram supplied with the unit governs.
- The remaining attached digests (fiber-optics glass, foundry, dental) describe other product lines and contain no facts applicable to the N 87/H.
Integration & Operating Notes
At the top of the 1280 °C range the load and heating elements must be shielded from ambient oxygen; the furnace is categorised under protective-gas processes. Gas supply, flow control and exhaust must therefore be part of the installation, and the gas atmosphere must be established before the chamber is taken to high temperature.
Selection & Integration Q&A
Pick the N 87/H when the load needs the long 1000 mm-deep, 250 mm-high chamber at up to 1280 °C. The N 41/H is the smaller chamber of the same temperature class; the N 81 is a different temperature class and the N 81/13 a different size/class combination, so match chamber geometry and temperature class first.
A 3-phase supply sized to the nameplate connected load (the catalogue heating figure of 25.0 has no printed unit), plus a protective-gas supply with flow control and exhaust, since the unit is categorised for protective-gas processes. Controller and gas-train wiring follow the unit's own wiring diagram.
The supplied documents give no model-specific service intervals, error codes or consumables list; these must come from the furnace manual. Controller options (500 series, MyNabertherm, AMS2750F instrumentation) are described separately and are not part of the base delivery unless ordered.