Nabertherm NR(A) 1000/..
Nabertherm NR(A) 1000/.. — Special Glass Furnaces.
The NR(A) 1000/.. is a hot-wall retort furnace from Nabertherm's series up to 1100 °C, built around a 900 × 1200 × 900 mm work space giving 1000 litres of useful volume. It is the largest sibling listed, positioned well above the NR(A) 40/.. and NR(A) 100/.. for bulk process loads. Its 307 (unit as printed) connected load and 2400 × 3600 × 2600 mm outer envelope define the utility and floor space required.
Full specifications
| Work space dimensions in mm mfr | 900 |
| Work space dimensions in mm mfr | 1200 |
| Work space dimensions in mm mfr | 900 |
| Useful volume mfr | 1000 |
| Connected1 mfr | 307 |
| Outer dimensions (W × D × H) mfr | 24003 × 3600 × 2600 mm |
Description
Construction and series positioning
- Hot-wall retort architecture: the retort wall is heated directly, so the process chamber is the heated envelope rather than an externally heated muffle.
- Work space measures 900 × 1200 × 900 mm (W × D × H as printed), giving 1000 litres useful volume.
- Within the listed series, this is the large-frame modification: the NR(A) 40/.. and NR(A) 100/.. are the smaller siblings; choose this one when batch geometry or throughput exceeds what those chambers accept.
- Outer dimensions of 2400 × 3600 × 2600 mm and a connected load of 307 (unit as printed on the factory sheet) make this a fixed-installation unit requiring dedicated floor area and supply capacity.
Behavior and process envelope
- The series ceiling is 1100 °C; no separate curve points or matched performance specs were supplied for this model, so heat-up and uniformity behavior must be taken from the series documentation and the selected controller rather than assumed here.
- Because the retort is the hot wall, the workload sees the retort surface directly; loading pattern and charge support inside the 900 × 1200 × 900 mm space govern uniformity.
Control and documentation
- The attached process-control digest covers the Nabertherm 500 controller series and the MyNabertherm app, including process data storage and AMS2750F instrumentation types; it prints no furnace model sizes, so controller configuration is ordered separately from the furnace frame.
- The remaining attached digests (fiber-optics glass, foundry, dental) describe other product lines and contain no NR(A) 1000/.. data; they should not be used to derive settings for this unit.
Integration & Operating Notes
The process-control digest describes the 500 controller series and MyNabertherm app, including process data storage and AMS2750F instrumentation types, but prints no furnace model codes. Specify the controller, recorder and instrumentation type as line items alongside the NR(A) 1000/.. rather than assuming they ship as part of the base furnace.
The series is rated up to 1100 °C. No model-specific curve points or matched performance specs were supplied, so setpoint limits, heating rates and charge loads should be taken from the order documentation and the selected controller program; running the retort above the series ceiling risks retort damage and invalid results.
Selection & Integration Q&A
Pick the 1000/.. when the charge needs the 900 × 1200 × 900 mm work space and 1000-litre useful volume; the 40/.. and 100/.. are the smaller chambers of the same series. If the batch fits a smaller sibling, the 1000/.. only adds floor space (2400 × 3600 × 2600 mm) and connected load.
The connected load is printed as 307 without a unit, so the definitive kVA, voltage and phase must come from the order-specific connection diagram. Size the feed, protection and isolation for that figure, and confirm the control cabinet position relative to the 2400 × 3600 × 2600 mm envelope.
It is a fixed installation: 2400 × 3600 × 2600 mm outer dimensions and 1000-litre work space require dedicated floor area with loading access. The series ceiling is 1100 °C; no model-specific heating curves were supplied, so rates and charge limits must come from the order documentation and controller program.
No certificates, applications or matched specs were supplied, and the attached digests list no accessories for this model. The 500 controller series, MyNabertherm app, recorders and AMS2750F instrumentation are described as separate control options; confirm spares, thermocouples and service intervals with Nabertherm at order.