Nabertherm RD 30/200/11
Nabertherm ·Made in Germany · In Active Production

Nabertherm RD 30/200/11

Nabertherm RD 30/200/11 — Tube furnaces.

The RD 30/200/11 is a compact 1-phase tube furnace with a 30 mm inner tube diameter and 200 mm heated length, rated to 1100 °C. Its 65 mm constant-temperature zone and 20-minute heating time distinguish this small-bore modification within the Compact Tube Furnaces series. It is intended for laboratory-scale thermal processing of small samples in a controlled atmosphere or ambient air.

Full specifications

Core Performance & Functional Specifications
Electrical connection 1-phase
Inner tube Ø mfr 30
Connected mfr 1.7
Heating time mfr 20 min
Outer dimensions (W × D × H) mfr 350 × 210 × 350 mm
Dimensions, Weight & Mechanical Design
Weight 10 kg
Heated length mfr 200
Length constant mfr 65
Operating Conditions, Environment & Protection
Max temperature 1100 °C

Description

Construction and series positioning

Thermal behavior

Control and operation

Integration & Operating Notes

Electrical
Single-phase supply must be sized for the 1.7 connected load

The furnace is a 1-phase unit with a connected load listed as 1.7 in the factory specification. The supply circuit, protective device and any upstream transformer must be rated for this load plus margin; the specification does not state the voltage, so the actual supply voltage must be confirmed against the nameplate before installation.

Factory Specification Sheet
Process Limits
Do not exceed 1100 °C at the heating element or work tube

The maximum temperature is 1100 °C. Operation above this ceiling risks element failure and invalidates any uniformity assumption; the 20-minute heating time is quoted to this limit, so ramp programs should be checked against it rather than assumed.

Factory Specification Sheet
Process Limits
Work tube bore limits sample diameter to 30 mm

The inner tube diameter is 30 mm, so samples, boats and thermowells must fit within this bore with clearance for the tube wall and any gas flow. The 65 mm length constant means only the central axial zone should be used for work requiring the stated uniformity.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the RD 30/200/11 rather than a larger-bore or longer-heated-length tube furnace from the same series?

Choose the RD 30/200/11 when samples fit within a 30 mm bore and the work must sit inside a 65 mm constant zone; its 200 mm heated length and 20-minute heating time suit short laboratory cycles. A larger bore or longer heated length is needed for bigger parts or longer uniform profiles.

What supply and work-tube requirements must be met before connecting this furnace to my lab services?

It is a 1-phase unit with a 1.7 connected load, so the branch circuit and protective device must be sized accordingly; the specification does not state the voltage, so confirm it on the nameplate. The work tube must match the 30 mm inner diameter and be rated above 1100 °C.

What maintenance and accessories are not included in the base delivery of the RD 30/200/11?

The supplied documents list no model-specific maintenance interval, spare-parts kit or included accessories. Work tubes, thermocouples, gas fittings and controller options are not stated as part of the base delivery; these must be ordered separately and the service schedule confirmed with the manufacturer.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF