Nabertherm S 750
Nabertherm ·Made in Germany · In Active Production

Nabertherm S 750

Nabertherm S 750 — Radiation Heating.

The S 750 is a top-loading radiation-heating furnace with a 750-litre chamber measuring 3000 × 500 × 500 mm, designed for long, narrow workloads. It reaches a maximum temperature of 1240 °C and is powered by a 3-phase electrical connection. Within the Top Loading Furnaces series, it is the elongated-chamber variant, distinguished from the shorter S 430 by its 3-metre internal width.

Full specifications

Core Performance & Functional Specifications
Chamber volume 750 l
Electrical connection 3-phase
Heating power 57 watt
Inner dimensions (W × D × H) mfr 3000 × 500 × 500 mm
Outer dimensions (W × D × H) mfr 3860 × 1500 mm
Dimensions, Weight & Mechanical Design
Weight 2800 kg
Operating Conditions, Environment & Protection
Max temperature 1240 °C

Description

Construction and series positioning

Electrical and thermal behaviour

Control and documentation

Integration & Operating Notes

Electrical
Three-phase supply required; power rating not confirmed

The furnace is specified for a 3-phase connection, but the only heating-power figure in the fact set (57 W) is physically implausible for a 750-litre chamber at 1240 °C. The electrical designer must obtain the actual connected load and fuse rating from the factory specification sheet before sizing the supply and protective devices.

Factory Specification Sheet
Mounting
Floor loading of 2800 kg over a 3860 × 1500 mm footprint

The unit weighs 2800 kg and occupies 3860 × 1500 mm externally. The installation floor must be assessed for the resulting distributed load, and access routes for moving the furnace into position must be checked against these outer dimensions before delivery.

Factory Specification Sheet
Process Limits
Chamber height of 500 mm limits workpiece stacking

With an internal height of 500 mm and depth of 500 mm, the usable cross-section is fixed; workpieces or fixtures taller than the chamber cannot be loaded. The 3000 mm width is the only extended axis, so loading plans should exploit length rather than height.

Factory Specification Sheet
Control & I/O
Controller series 500 and app documented separately from furnace

The controller digest describes series 500 functions, process-data storage and AMS2750F instrumentation types but prints no S 750-specific parameters. Control configuration, thermocouple type and recorder options must be confirmed against the furnace order documentation, not the generic controller brochure.

Prozesssteuerung englisch

Selection & Integration Q&A

When should I choose the S 750 rather than the S 430?

Choose the S 750 when the workload needs the 3000 mm chamber width; its 750-litre volume and 1240 °C limit suit long, low parts. The S 430 is the shorter sibling for smaller batches, but its key specs are not given here, so compare chamber dimensions before deciding.

What supply and protective equipment does the 3-phase connection require?

The furnace is a 3-phase unit, but the only power figure supplied (57 W) is implausible for this size and cannot be used. Obtain the actual connected load and recommended fuse rating from the factory specification sheet before sizing cables and breakers.

What floor and access conditions must be met for installation?

The furnace weighs 2800 kg and measures 3860 × 1500 mm externally. Verify floor load capacity and that doors, corridors and lifting equipment can pass these dimensions; the supplied documents give no further siting clearances.

What maintenance and accessories are defined for the S 750?

The supplied documents contain no S 750-specific maintenance schedule, service intervals or accessory list. Controller options are described only generically in the series 500 digest; consumables and cables must be confirmed with the order documentation.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF